Please consult the wiring and installation method of the camera in the elevator. Thank you.

Elevator monitoring is no longer difficult.

Prepare a few meters (the reserved length from the duty room to the elevator shaft) video line first, and pull one end from the duty room to the elevator machine room. For elevators without machine room, you can pull the video cable from the duty room to the weak current well on the middle floor of the elevator, make a hole to enter the elevator well, and then the elevator operator or elevator maintenance unit will help you stand at the top of the elevator car to open the elevator. You can tie the video cable to the elevator cable attached to the elevator, and leave enough video cable at the other end to enter.

The next step is to prepare a camera, preferably circular, and install it in the corner of the stainless steel ceiling of the elevator, aiming the camera at the entrance and exit of the elevator.

The power of the camera is directly obtained from the top of the elevator car, preferably a socket, which is convenient for maintenance.

Reminder: Pay attention to safety when working in the elevator shaft, and there must be cooperation from the elevator operator of the property or the maintenance personnel of the elevator maintenance unit.