What should I do if the office fire inspection fails?

Abstract: A safe office space must pass the fire inspection. So how is the fire acceptance standard of the office determined? What should I do if I fail to pass the acceptance again? Below, in order to help you better understand the relevant knowledge, Bian Xiao has compiled the following contents, hoping to help you. Fire protection acceptance standard for office premises

1, fire sprinkler problem in office decoration.

Before the renovation of office decoration, the fire protection renovation of the whole building generally passed the acceptance; The property company or developer will provide a copy of the fire inspection report. Many owners or decorators mistakenly think that the office does not need fire-fighting renovation, but can be directly renovated. This is an extremely wrong concept, because the state stipulates that the house must be rebuilt twice before it is renovated. One of the most important problems is the fire sprinkler. We all know that ceiling decoration usually needs a ceiling, which leads to the sealing of the nozzle on the ceiling layer. This is extremely incorrect. We should move the sprinkler below the ceiling, so as to be qualified to carry out the renovation of the sprinkler.

2. The smog problem in office decoration.

Smoke sense is a kind of fire-fighting equipment for measuring smoke concentration. In the office, they are usually installed at the top; You may find that this kind of equipment existed before the decoration construction, thus mistakenly thinking that there is no need to make adjustments during the decoration. This is not standardized, because the fire department stipulates the use area of each smoke sense. If the functional space partition changes, we should increase or adjust the corresponding number of smoke senses.

3. office decoration's safe export.

There is no doubt that the office is a public space with a high population density, so the number of safety exits must be kept at two or more, so as to facilitate evacuation in case of sudden problems. When decorating office space, it is also unreasonable to reserve only one exit or the entrance door as the exit. If there are not enough exits, we should rebuild the house to ensure two or more exits.

4, office decoration fire hydrant problem.

The setting of office fire hydrants has strict requirements and cannot be designed at will. There are usually three requirements: first, the location of fire hydrants should be in public places, such as office halls and corridors, and should not be designed in closed rooms; Second, the height of the fire hydrant must meet the relevant standards, and the height cannot be set at will according to one's own wishes; Third, the water in the fire hydrant can't be used at ordinary times except for emergency fire fighting.

5, office decoration emergency lights.

Emergency light is one of the necessary equipment for office fire control reform. Its function is to facilitate temporary lighting in case of fire and power failure and ensure people to escape under visual conditions. Emergency lights, like fire hydrants, are clearly stipulated in the installation position, installation height and lamp spacing, and cannot be installed at will.

What should I do if the office fire inspection fails?

The following unqualified phenomena appear in the fire inspection, and a fine shall be imposed. If the construction unit fails to report the fire control design documents to the fire control institutions of public security organs for the record according to the provisions of this law, or fails to report them to the fire control institutions of public security organs for the record according to the provisions of this law after completion, it shall be ordered to make corrections within a time limit and be fined not more than 5,000 yuan.