Where can I find the apartment?

1. If you can contact the developer of the residential area, you can go directly to the customer service department of the developer and check the drawings and files saved by the developer.

2. In a residential area managed by a formal property enterprise, the property department will keep a drawing document of the apartment.

3. Go to the construction archives of the city where the community is located, where drawings of apartment types will also be filed. File inquiry is paid. If you want to copy the drawings, you need to pay the copy fee. Architectural drawings are generally large in size and the cost of copying is not low.

4. If you know the design unit of the community, you can also go to the design institute to inquire about the earliest design drawings. However, the design drawings may change during the construction process. The earliest design drawings may not be completely consistent with the final building completion drawings. There is also a charge for copying drawings in the design institute.

How many types of houses are there?

1. Flat-floor apartment: Generally speaking, it refers to an apartment with all rooms such as hall, bedroom, bathroom and kitchen on the same floor.

2. Jumping apartment: refers to a residence occupying two floors. Auxiliary rooms such as bedroom, living room, bathroom and kitchen can be arranged in layers, and the traffic between the upper and lower floors is connected by small stairs used by users without going through public stairs.

3. Staggered apartment: refers to houses that are not on the same plane, that is, the hall, bedroom, bathroom, kitchen and balcony in the room are on several planes with different heights.

4. Duplex apartment: Duplex apartment is conceptually a one-story apartment with no complete two-story space.

Which units are better?

1, dynamic and static partition. The mobile areas are: living room, dining room, kitchen, secondary toilet, etc. Quiet areas are: bedroom, study, main bathroom, etc. The mobile area is an area with frequent personnel activities and should be set near the entrance. Quiet area is mainly for residents to rest, relatively quiet, try to arrange in the apartment.

2. Dry area and wet area. Dry-wet partition is to separate dry area from wet area, generally referring to kitchen and bathroom. Two rooms with heavy moisture and easy to produce dirt should be separated from bedroom as far as possible. Kitchen is the main pollution source in home life, where noise, oil fume and cleaning sewage are concentrated. Therefore, the layout of the kitchen should be as close to the entrance door as possible, away from the bedroom and living room.

3. Public and private zoning. Housing units have privacy requirements, which can properly protect the privacy of occupants. The privacy of the apartment mainly needs to be done in two aspects: first, when looking into the apartment from the outside of the entrance door, it is necessary to block the entrance, avoid standing outside the door, and get a panoramic view of the house; Secondly, the public living room, dining room, bedroom and other private spaces are visually shielded to avoid glancing at the private space in the public space and achieve a certain degree of "public-private division".

4. Good air permeability. The permeability of a house mainly refers to the ventilation and lighting performance of the apartment. To ensure the good permeability of huxing, first of all, it is required that huxing has a good height-width ratio, that is, huxing is relatively square; Secondly, lighting and ventilation have two sides, which are better than two sides (such as north and south, east and west), followed by two adjacent sides (such as east and west, north and south, east and west, etc.). ), and only one side has poor lighting and ventilation effect. In addition, the kitchen and bathroom are two areas with high humidity, so we should try our best to achieve independent lighting and ventilation, that is, to avoid the darkness of the kitchen and bathroom.