Who will pay how much if the floor heating is suppressed?

Floor heating is a facility that everyone can't live without in winter, especially in the cold winter in the north. Living in a building with floor heating is a way for us to avoid the cold. About floor heating, friends may not know much, let alone the detailed decoration and setting plate content. Therefore, in order to solve this problem, today I will introduce to you the information that floor heating plays an important role in the actual operation process, including the quotation and process standards.

1. How much is the floor heating?

Generally, it is done in front of the owner when the property is handed over, which is divided into two ways: water pressure and air pressure. There is generally no charge.

The price of floor heating or radiator is different! Local radiator 100, floor heating 5 yuan per square meter. This is the settlement price given by the workers to the company.

Second, the floor heating suppressed some pressure.

Geothermal pressure is generally measured at 6 kg, which can achieve the purpose of detection without damaging geothermal pipelines, but the specific pressure and time of geothermal pressure will be slightly elastic according to different situations, but the lowest pressure is 15 minutes and 6 pressures! It is normal to lose pressure, because manual operation cannot be completely closed, but the watch should be stable after pressure relief, which means that the construction is successful.

The higher the geothermal detection pressure, the better.

Many people want to use high pressure to prove that there is no leakage in the geothermal circuit when doing pressure detection after laying geothermal energy, which is actually not good for geothermal pipelines. The pressure parameters at the factory are laboratory data, which are obtained under the premise of certain room temperature, water temperature, humidity and pressure balance.

Geothermal energy is usually detected at a pressure of 6 kg, which can achieve the purpose of detection and will not damage geothermal pipelines.

Third, what is floor heating suppression?

Floor heating is a concealed project, which has a complete industry standard system from installation, design, acceptance and use. After the floor heating backfill is completed, it is basically impossible and unnecessary to change the system. After the completion of floor heating construction, the construction unit must carry out floor heating suppression test to check whether there is water leakage. Therefore, floor heating suppression is the most critical link in the installation process of floor heating. The qualified pressure indicates that the system is normal, and the unqualified pressure indicates that the floor heating system has water leakage, construction and other faults, which need to be investigated and re-suppressed by the construction personnel.

Fourth, floor heating pressing technology and standards

1. Take the water collector of each module as a unit, use a hydraulic pump to inject water into the floor heating system, and exhaust the gas in the system pipeline at the same time. Remember to find a professional floor heating company to suppress floor heating; ? 2. Slowly increase the pressure to 0.6Mpa or 1.5 times the system working pressure;

3. Observe and check the floor heating pipeline, the connection point between the floor heating pipe and the distribution manifold, the distribution manifold and its joints for leakage at any time during the boosting process;

4. Check whether there is any leakage point after stabilizing the voltage for one hour;

5. After no leakage is confirmed, raise the pressure to 0.6Mpa, observe for 15 minutes, and the pressure drop will be reduced.

Regarding floor heating suppression, we introduced its market quotation information, process standards and other information from the perspective of users and professionals. We can understand that the general floor heating suppression is the responsibility of the property management company, which needs to be operated according to certain procedures to ensure the normal use of the later products. There are also professional requirements on standards. In a word, floor heating suppression is an essential part of a complete floor heating system.