The elevator shaft size of high-rise residence is generally not less than how much.

Take the common car size as an example.

Passenger elevator:

630kg(8 persons) car size110x1400, elevator shaft size with machine room (usually after counterweight) 1700x2 100.

Elevator shaft size without machine room (generally with counterweight side) 1800x 1800.

800kg( 10 person) car size 1350x 1400, elevator shaft size with machine room (usually after counterweight) 1900x2 100.

Elevator shaft size without machine room (generally with counterweight side) is 2000x 1900.

1000kg( 13 persons) car size 1600x 1400, and elevator shaft size with machine room (generally after counterweight) is 2200x2 100.

Elevator shaft size without machine room (generally with counterweight side) is 2300x 1900.

1350kg( 18 people) car size 190X 1500, elevator shaft size with machine room (generally after counterweight) is 2500x2300.

Elevator shaft size without machine room (usually counterweight side) 2600x2000

1600kg(2 1 person) car size 190X 1700, elevator shaft size with machine room (generally after counterweight) is 2500x2500.

Elevator shaft size without machine room (usually counterweight side) 2600x2300

The size of the freight elevator is very different:

However, the national standard requires a total area. I'll give you a rough calculation method.

Well width = vehicle clear width+1300 or so; Shaft depth = car depth +600 or so (for playback on the side)

Well width = vehicle clear width +900 or so; Shaft depth = car depth+1200 or so (when counterweight is placed behind)

U-shaped sightseeing ladders are generally around 1000kg, and cars are generally around 1300x 1800. Give a steel shaft, the width is between 2200 and 2400, and the size of the door. The depth of the structure is about 1500, and the back wall is empty.

Two elevator shafts can use one shaft, but there must be a separation beam in the middle, that is, a structural lintel with a thickness of about 200 and a height of about 300 and an interval of not more than 2500mm, to fix the guide rail bracket.

The size of U-elevator varies from manufacturer to manufacturer, and it is not much better than ordinary elevator. If you want more details, I'm afraid it's not clear. If you have any other questions, you can leave me a message and contact me.

I hope it helps you.