How to get from Pudong Airport to No.5, Lane 4 13, Lujiabang Road, Huangpu District?

Driving route: the whole journey is about 40.7 kilometers.

Starting point: Shanghai Pudong International Airport

1. Start from the starting point in the direction of true north, drive for 460m, and turn left slightly in the direction of S 1/ Shanghai downtown/taxi parking lot.

2. Drive 400 meters along the ramp and go straight into Yingbin Avenue.

3. Drive along Yingbin Avenue 140m and go straight to Yingbin Expressway.

4. Drive along Yingbin Expressway 120m, turn left slightly and enter Yingbin Expressway.

5. Drive along Yingbin Expressway for 3.9 kilometers, head for Huaxia Elevated Road/Zhonghuan Road, turn right slightly and get on the ramp.

6. Drive along the ramp for 840 meters and go straight into Huaxia Elevated Road.

7. Drive along Huaxia Elevated Road 14.0km, cross Tuanjiehe Bridge on Huaxia Middle Road, and go straight into Central Elevated Road.

8. Drive along the viaduct of Zhonghuan Road for 400 meters, turn right slightly in the direction of Shangzhong Road Tunnel/Zhonghuan Road, and enter the Jiang Shen Road overpass.

9. Drive along the Jiang Shen Road overpass 1.3 km, and go straight into Zhonghuan Road.

10. Drive along Zhonghuan Road for 2.6km and turn right slightly in the direction of Luoshan Elevated Road/Outer Ring Expressway/Inner Ring Elevated Road.

1 1. Drive along the ramp for 240 meters, cross Zhangjiabang Bridge on 16 for about 550 meters, and go straight into luoshan road.

12. Drive along luoshan road 3. 1km, get off at the exit of Inner Ring Elevated Road/nanpu bridge/luoshan road/Longyang Road, turn right slightly and enter Zhangjiang Overpass.

13. Drive along Zhangjiang overpass for 770 meters, cross Lujiabang Bridge on Jingming Road for about 780 meters, and go straight into the inner ring viaduct.

14. Drive along the inner ring viaduct for 6.9 kilometers, cross the Sea Lion Building on the right, exit at Lujiabang Road, and go straight up the ramp.

15. Drive along the ramp for 290 meters. After passing the triangle building on the right for about 320 meters, go straight into Lujiabang Road.

16. Drive along Lujiabang Road for 250 meters and turn around and enter Lujiabang Road.

17. Drive along Lujiabang Road for 800 meters and then turn around and enter Lujiabang Road.

18. Drive along Lujiabang Road for 2 10 meters. After passing Huapu Science and Technology Building on the right for about 70 meters, turn right.

19. Drive 30 meters to the finish line (on the right side of the road).

End point: Lujiabang Road, Huangpu District