Matters needing attention in office decoration

The first thing to do when entering the site is to evaluate the ground. If the ground is flat enough, simply do it. Otherwise, leveling is needed, and this cost cannot be saved at all. You can't blame the developers, you can only blame luck. Whether the floor is a carpet or a wooden floor, a flat floor is an absolute prerequisite.

Slot construction

It is still related to the ground, that is, the trunking. Attention should be paid to the depth and width of trunking, because insufficient size will also make the ground uneven after pay-off, and then only rework.

Farr code

Modern offices have relevant fire protection codes. If there is a ceiling, the indoor sprinklers should be exposed to the ceiling for a certain size, and they should be handled horizontally. This matter has to be handed over to a professional company.

Smoke sensor increase

If there is new space in the room, according to the fire code, a separate smoke detector must be added, and a professional company should be invited to do it, usually the maintenance unit of the building. If this item and the above item are not changed well, you will not be able to pass the property acceptance.

Weak current conversion

In many office decoration processes, because of the small scale, weak current transformation (including network cables and telephone lines) is often not done by specialized integrated wiring companies. At this time, we should pay special attention to it, and we must label the data and voice when paying off, so as not to bring trouble to the follow-up work.

Pipe-piercing steel wire

All wires that need to be threaded in the office must be made of steel pipes, not PVC pipes that are common in home decoration. The wire box is also an iron box. Maybe PVC is ok, but that's a requirement.

Central air conditioning reform

Nowadays, many buildings are equipped with central air conditioning and fresh air systems, but the indoor air outlets may not meet the requirements. The decoration company needs to entrust professionals to extend or transform the air outlet, and the ceiling project needs to cooperate.

Wall quality

If the quality of the office wall is not good, be sure to dry it thoroughly after scraping the putty.

Furniture wiring

After the office furniture enters the site, the strong and weak current wiring needs to be installed at each station together with the installation of the office partition, and it is not allowed to be pulled and put at will, which may easily cause safety and use hidden dangers.