Parking lot lighting

The electric energy consumed by underground garage lighting can not be ignored. Conservative estimation can account for one-third of the lighting electricity consumption of the whole community. If the energy-saving design of underground garage lighting can be done well, the property management cost of residential residents will be greatly reduced, or this part of the property cost can be used to build other public facilities. So how to design the lighting design of underground garage?

The biggest feature of the underground garage lighting system is that it needs to run continuously for 24 hours, even in the low peak period, it needs to maintain a certain illumination in some special parts. However, many property companies often replace lamps with smaller wattage or artificially make some lamps not light (remove starters, etc.). ) to reduce the operating cost of the garage. These methods are not ideal. Because in an emergency, the garage can not be quickly restored to normal lighting. However, in the peak period of use, it is impossible to maintain sufficient illumination in the garage, which will not only have a certain impact on the passage and parking of vehicles, but also have great security risks.

The most effective way to reduce the cost of garage lighting system is to implement partition and shunt lighting and control the lighting time reasonably. Garage lighting system is mainly divided into two systems, namely, normal working lighting system and fire emergency lighting system. Fire emergency lighting system is usually installed at the entrance and exit of the garage to maintain the most basic lighting requirements in the garage in case of emergency. It depends on the requirements of the garage manager. Generally speaking, the intelligent management of garage lighting system is developing, and it is an inevitable trend to adopt microwave radar induction integrated lamps. Microwave radar induction lighting, when people come, the lights are all on, and when people leave, they are slightly bright, saving electricity by 85%.

Of course, using natural light for lighting is the most economical measure. It is undoubtedly the wisest choice to set up a reasonable lighting well. The underground garage of this project is located outside the high-rise building, and its roof is directly under the outdoor terrace. There are two 5m lighting wells in this area and 27 parking spaces (about 500 m2) nearby, which can basically meet the requirements of normal lighting. The lighting system installed in this area only needs to be used as compensation for night lighting. At the same time, in order to make the lighting well have a certain landscape effect in the courtyard, the lighting well is reasonably matched with the structures in the courtyard to make a pyramid platform, landscape pool and so on. , to achieve good landscape effect.

In the purchase of lamps, you can choose LED radar sensor tubes with beautiful lighting. This kind of lamp can perfectly achieve the effects of lighting when people come, lighting when people go or dim, and can greatly achieve the effect of energy-saving lighting.