What if the card meter is dead?

Almost every household in the northern city has installed heating, and the use of heating will lead to the rapid decline of electricity meter, so it is necessary to charge it in time to avoid affecting the use of heating. What should I do if the plug-in meter is out of power? What problems should be paid attention to when using electric meters? Next, Bian Xiao will introduce relevant contents to you. Let's have a look.

What if the card meter is dead?

Plug-in meters should be charged in time when there is no electricity. Usually, when the electricity bill balance is still 10 degrees, the meter will trip to remind the user to recharge. In this case, you can use 10 degrees of electricity when inserting the card again.

How to recharge the card meter

If you don't have time, you can entrust the property to help recharge. After the recharge is successful, the property will issue a receipt. Before recharging, you need to find a good electric card, and at the same time be careful not to pollute the chip of the electric card. After the recharge is successful, insert the chip of the electric card into the most accurate position on the left side of the meter, and then wait for five seconds to display the balance, which can be recorded by paper and pencil.

What problems should be paid attention to when using electric meters?

1 First of all, you should correctly select the electric meter you need, and the rated voltage of the electric meter should be consistent with the rated voltage of the load. Usually, the rated current of the electric meter is greater than the current of the load, so that the electric meter will not be damaged and it is safer to use. In addition, pay attention to the rate of electricity meter. The actual degree of some electric meters needs to be multiplied by a coefficient, which is the rate of electric meters.

2. When installing the electric meter, you need to ask professionals or designated departments to help you install it, and you can't install it yourself. When installing the electric meter, you should choose a dry, clean location that is convenient for reading and free from magnetic field interference. If it is surface mounted, the meter should be one meter eight to two meters from the ground. If it is hidden, the height between the instrument and the ground should not be less than 70 cm.

Abstract: The above is what Bian Xiao introduced to you about how to do and how to charge the plug-in meter when it is out of power. I hope I can help some friends in need. In addition, you must pay attention to safety when installing electric meters.