Clean the secondary water supply tank as required. What is this rule?

According to the requirements of the new regulations, the property management company should invite the management unit of secondary water supply facilities to conduct a test on the water quality of secondary water supply every quarter, clean and disinfect the secondary water supply tank facilities every six months, and provide qualified water sample test reports.

Inject a proper amount of tap water into the water tank, rinse the above parts repeatedly with clear water, and rinse off the disinfectant. Water injection. After the cleaning work is completely completed, open the gate and inject water into the pool (tank) to the calibrated water level, and lock it.

Extended data:

Precautions:

(1), in the process of cleaning stainless steel water tank, disinfection personnel must wear goggles and masks. If they feel uncomfortable in the water tank, they will feel dizzy, eye pain, heart tightness and difficulty breathing. They should leave the swimming pool immediately, wash their eyes with clean water and breathe fresh air to restore their health.

(2) When removing sundries and cleaning the pool, first shovel out the mud, sand and various sediments in the pool, and then scrub them from the top of the pool (box)-the surrounding walls-the bottom of the pool (box) in turn with a broom or nylon brush. After brushing, use a high-pressure water gun to wash it as a whole to discharge sewage.

Baidu encyclopedia-secondary water supply tank