What is intelligent IC card elevator ladder control system?

Intelligent IC card elevator ladder control system, that is, IC card layer control elevator control system, is an intelligent control system that takes over the key of the original elevator system through passive contacts and is installed in the car. Only by using IC card can you reach the desired floor, swipe your card directly, and you can take the elevator without keys and passwords.

Other unauthorized users cannot press the floor button in the car, which improves the safety of property management. At the same time, it plays an environmental protection role, saves the electricity and gas consumption of the elevator, and also reduces the use of elevator buttons (users automatically register the destination floor after swiping the card without pressing the button), thus prolonging the service life of the elevator, strengthening the weak management side in the traditional safety management system and improving the safety level of the property.

The control system of multi-Austrian IC card elevator is optimized, which makes the system run independently under intelligent offline. The system parameter setting, card issuing and loss reporting are all realized by a unique scheme, which is simple and easy to use without laying network communication lines.

Second, the system functions and characteristics

2. 1 Introduction to the functions and characteristics of hardware equipment

2. 1. 1 The floor is controlled by floor extension boards, 1 The controller can control 64 floors with four floor extension boards at most. Floor expansion is flexible and convenient, floor control is added, no setting is needed, and the system automatically adapts.

2. 1.2 The control system adopts passive dry contact connection, which is completely isolated from the original elevator system and will not have any influence on the original performance of the elevator. When a fire signal is input or the control system is powered off, the control system will automatically disconnect and the elevator will resume normal use.

2. 1.3 Each user can set different permissions, and can authorize users to have single floor permissions, multi-floor permissions, or all floor permissions.

2. 1.4 time permission setting, which can set different users to use the elevator at different time periods.

2. 1.5 IC card writing mode, unlimited number of cards issued, 9,800 blacklists stored in the system and 76 million credit card records.

2. 1.6 You can use pure glass capacitor to touch the password to get the ladder. Different passwords can set different floor permissions, and each controller can store up to 8500 passwords.

2. 1.7 supports charging function and charging by time. If the card has no money or does not delay time, it is not allowed to use the elevator, and a monthly fee can be charged.

2. 1.8 It is convenient and flexible to report the loss of lost cards without networking. You can use the loss reporting mother card or intelligent offline data collector to report the loss. Generally speaking, reporting the loss of the mother card can meet most situations, and 255 cards can be reported at a time. Normally, you don't need so much.

2. 1.9 management personnel can issue control cards to any designated floor. After swiping the control card, the designated floor key will be unconditionally disabled, even if the user card has been swiped. After swiping the control card again, the disabled floor button can be used again.

2. 1. 10 adopts a unique intelligent offline data collector, and the operation of parameter setting, data collection and card loss reporting is very simple, without user intervention. As long as the intelligent data collector is plugged into the data collection interface, the data collector will automatically complete all operations, and the user can unplug the data collector after the prompt is successful.

2. 1. 1 1 intelligent offline application, simple wiring, and powerful offline operation function of elevator control system. Parameter setting, data transmission is very convenient and intelligent, without manual intervention, and the real intelligence is fully realized automatically.

2.2 Software functions

2.2. 1 SQL Server, a Microsoft advanced database system, is adopted, and the data storage is safe.

2.2.2 Multi-user management mechanism, different users can be assigned different operating rights.

2.2.3 Easy-to-use operation interface, anyone who can operate a computer can operate the elevator management software with a little learning.

2.2.4 Flexible card issuing function, which can flexibly set the floor authority and service life of each card.

2.2.5 It can communicate with elevator controller through data collector or networking, and set various parameters.

2.2.6 For more software functions, please refer to the software operation manual.

Third, the system equipment related parameters

Product model: DAIC DT CK

Communication interface RS485, TCP/IP

Communication rate RS485: 9600 bps (1000m) TCP/IP: (100m).

Every time 1 floor expansion board is added to the control floor, 8 floors can be controlled, and up to 4 floors can be driven to control 64 floors.

Working voltage 12-24V DC.

The normal working current is about 150mA (excluding floor extension plate).

Working temperature-10 ~ 70℃

Working humidity 15 ~ 95%

Time Permission (1) Each card can set the time period for using the elevator, which is circulated once a week.

I/O (1) with 1 ~ 4 M 1 card readers or 1 ~ 4 ID card readers (2) 1 fire input terminals.

The card reading type is any IC card, ID card, CPU card, etc. , depending on the card reader type.

Fourth, the system structure

The elevator control system with IC card layer control includes IC card, card issuing mechanism, elevator card swiping controller, floor contact expansion board, elevator IC card reader, elevator control management software, intelligent offline data collector and PC.

Contactless IC card: Philips Micfare- 1 S50 card is adopted. This card * * * has 16 sectors, and the elevator system uses 4 sectors, so the authority of the elevator floor is stored in the IC card.

Other solutions: mobile phone APP, Bluetooth shake elevator, NFC, RF-SIM card, etc.

Elevator reading head: embedded on the elevator operation panel in the elevator car. The card reader communicates with the IC card through radio frequency signals and provides energy for the chips on the IC card. The system identifies the IC card through the card reader.

Elevator controller: it is the main control module of IC card elevator controller, installed on the top of elevator car, and used to receive, identify and process IC card information transmitted by card reader, and control the internal call button of elevator; The controller is connected with the elevator by dry contact, so the elevator IC card system is not electrically connected with the elevator itself, which is safe and reliable; And under certain conditions (such as elevator maintenance and fire alarm), the controller can also release the control of elevator buttons.

Ladder-controlled card issuers: Generally, a property management office is equipped with one card issuer, and multiple smart card issuers can also be configured. The computer is connected through USB, through which the management software writes the information such as the authority of the card into the IC card.

Managing computers: installing system management software is the center of system management and information processing. The system management software has powerful data manipulation functions, and data such as card issuance, authority modification, loss reporting and traffic record statistics are all processed and summarized in management.

Intelligent off-line elevator data collector: it is the carrier of data exchange between management software and elevator controller, which can automatically identify equipment without manual operation, automatically complete data exchange and prompt with LED flashing.

Verb (abbreviation for verb) usage

5. 1 operation process

In normal use, the elevator controller will control the elevator, and only the cardholder can use the elevator at this time; Moreover, when the cardholder's card is a single-layer authority card, the elevator will directly register the corresponding authority layer after the user swipes the card; When the cardholder's card is a multi-layer authority card, the user can choose to press the floor button with authority on the elevator control panel after swiping the card, and the button without authority is still invalid.

Property security personnel and cleaning personnel hold advanced user cards, which can open all floor permissions and facilitate such personnel to use the elevator freely.

Visitors come, first register at the reception desk to get a card with the right to visit the floor, and then visit with the card; After the visit, return the card to the reception desk. Optional pairing elevator, telephone elevator and other IOT ladder control systems to solve the problem of visitors.

Generally speaking, the elevator's public * * * floor selection button will not be controlled, so when all the people are in the elevator car, they can choose the elevator's public * * * floor button, that is, people don't need to swipe their cards to go to the public * * * floor.

5.2 Special circumstances

5.2. 1 If there are special management needs, you can set the time period for the user card to use the elevator. During the time period, users can swipe their cards to use the elevator, but they cannot swipe their cards outside the time period.

5.2.2 Management personnel can issue control cards to any designated floor. After the control card is swiped, the button on the designated floor will be unconditionally disabled, even if the user card has been swiped. After swiping the control card again, the disabled floor button can be used again.

5.2.3 Because the IC card elevator control system can realize the linkage with the fire signal, after the fire signal is input, the IC card elevator intelligent control system stops working, and the elevator is restored to an ordinary elevator to ensure the emergency use of the elevator in an emergency; After the fire signal is released, the IC card elevator intelligent control system will automatically run the controlled elevator. In the elevator maintenance state, the IC card elevator control system can be manually disconnected through the power switch installed in the driver's box of the elevator car, and then the IC card control state can be manually turned on after the elevator maintenance is completed.

5.3 charging mode

The system can realize two charging modes.

The first type: pay by time. In this mode, the user first pays a certain amount of money in the property management office, and the card will be charged a certain number of times. Every time a card is swiped in the elevator, it will be deducted. When the number of times in the card is 0, you can no longer take the elevator, and you can only use it after recharging in the management office. In this way, different rates can be set according to different ways, for example, according to the height of the floor.

The second type: charging by time period (monthly subscription, annual subscription). In this way, customers can set the validity period of the user card according to their own needs. For example, if a user pays a management fee for one month, he can give his card a month's permission. After one month, the card will be invalid, users will not be able to swipe their cards and take the elevator, and they must pay the management office to postpone the use.

5.4 Loss reporting of cards

4. 1. If the owner card is lost, you can report it to the management office. A blacklist will be generated when the management office reports the loss. If the blacklist is downloaded to the elevator controller of IC card through the lost mother card or data collector, the lost card will become an unusable waste card.

4.2 The management office reissues the owner's new card.

Schematic diagram of intransitive verb installation

6. 1 Installation location

6.2 Installation method

6.3 User Usage Process

6.3. 1. For the owner, the owner of the residential area uses the elevator with the IC card authorized by the management office. After the owner enters the elevator, if his floor authority is the first floor, the owner's floor will automatically light up without pressing the button after entering the elevator. If the owner has the authority of several floors (for example, living on 12 floor, but 14). Then we will help the owner to authorize the floor permissions of 12 and 14 in the management center. After swiping the card, the owner can press the key to select the required floor to use the elevator within the specified time. In the case of forgetting to bring the card, the resident can enter the designated floor by entering the designated floor number and password on the card reading keyboard (the password is set by the owner himself, and the setting method can be set on the controller with the owner's card, and the password of each owner is different).

6.3.2. Property manager: 1 card can configure all (or part of) floors. After swiping your card in the elevator, press a floor key. The authority of the card issued by the property management company is authorized by the specialized personnel of the property management company, and the authority of the property management card can be set according to the time period and floor. For example, property inspectors can only go to those floors within a certain period of time.

6.3.3 Visitors: After the visitors register, (1) security guards will hand out temporary visitor cards at the gate of the community with card issuers. Before issuing temporary visitors' cards, the community security guards should communicate with the owners who the visitors want to visit through the intercom at the door, and issue temporary visitors' cards only after obtaining the consent of the owners. The permission of the visitor card can only be the permission to drive the elevator and go to the floor intelligently. (2) The security guard swipes the authorization card of the property management personnel. (3) Enter the owner's floor password to use. You can choose IOT ladder control systems such as multi-Olympic intercom elevators and telephone elevators to solve the visitor problem.

6.3.4 Door-to-door visit of residents: Door-to-door visit between residents can be realized by the way that the host provides the password, and at the same time, it can also be realized by the administrator opening the access authority of the designated floor with the reception card. You can choose multi-Austrian intercom linked elevator, telephone linked elevator, and IOT ladder control system to solve the door-to-door communication problem.

6.3.5. Underground parking lot: For non-residents, through setting, they can only reach the basement level and cannot enter the residential level.

6.3.6. Special circumstances: Because the IC card system can realize the linkage with the fire signal, after the fire signal is started, the elevator is automatically not controlled by the IC card to ensure the emergency use of the elevator in an emergency.