How to debug the limit of household electric rolling gate

1. After the electric shutter door is installed, loosen the locking screw on the motor limit slider before debugging, and then use the manual zipper to make the shutter door about one meter off the ground.

2. First try to manually press the switch on the button to see if it is normal to go up, down and stop. If it is normal, the shutter door can be raised or lowered to the position you determine.

3. Then, in the debugging process, adjust the upper and lower sliders to the best position repeatedly, so that they can control the upper limit and lower limit microswitches.

4. Finally, be sure to lock the screws, otherwise it will easily lead to the impact or serious damage of the shutter door.

Extended data:

Precautions for shutter doors:

1. Check whether there are piles when the shutter door is opened and closed up and down, especially when the fire shutter door is linked with the fire protection system, which often leads to damage or inclination of the fire shutter door due to improper operation.

2. Ordinary electric shutter doors should also pay special attention. When opening and closing curtains, people should be on the scene. If the curtain is tilted or the track is blocked, stop it in time to avoid further damage to the motor and curtain.

2. Pedestrians and running are strictly prohibited when the door curtain is opened and closed, because the door curtain is connected through connectors, and there are few unsafe factors between the motor and the transmission shaft. Therefore, when the curtain is opened, no one should run as far as possible.

Baidu encyclopedia-shutter door