Is the invisible anti-theft net safe?

Invisible anti-theft net is mainly composed of steel wire rope and aluminum profile. The wire rope is made of special technology and contains conductive copper wire (only 0.27mm), which can be connected to the alarm system to play the role of anti-theft.

Beautiful-steel wire rope, 2mm, the installation of anti-theft net will not affect the external wall, which is consistent with the original architectural style and conforms to the relevant regulations of the existing urban building facade. /kloc-basically invisible beyond 0/5 meters, does not affect the field of vision.

Safety-each steel wire can bear more than 85- 120KG of gravity, and the small spacing (5 cm spacing) can effectively protect children's safety and prevent them from falling when climbing.

Anti-theft-the invisible anti-theft net can be connected to the alarm system. Once the thief destroys him, the buzzer will be sent to the neighbors. Of course, you can also connect an alarm host, through which you can send the danger to the mobile phone or property center set by the owner in advance.

Escape-Of course, when there is a fire, adults only need to cut in a vise for a few seconds to escape quickly. Firefighters can enter from the window, which can save first aid time.

disadvantaged

It requires high installation quality, and improper installation will leave potential safety hazards. For example, a large area of anti-theft net installation must have a solid wall.

Principle of anti-theft net

Tension and wind a 2mm thick steel wire between the profiles fixed at the outer end of the window, and the steel wire spacing is fixed at 5CM. The steel wire can withstand a tensile force of more than 85- 120KG, which can ensure that the thief cannot break it. Because the spacing between steel wires is 5CM, people can't get into the gap, so it can effectively play the role of anti-theft protection.

The invisible anti-theft net is specially designed and has the function of disconnection alarm. When the thief cuts the wire, the intelligent alarm connected with the wire will give an alarm, and the alarm will be carried out in two ways at the same time. First, it will sound an alarm, and it will make a harsh cry of 120 decibels, which can effectively scare off thieves. At the same time, the alarm host will automatically start the dial-up alarm function, which can continuously dial seven preset numbers (such as property security, owner's mobile phone, office phone, etc.). ). After the connection, the alarm content recorded by the owner in advance will be played. In this way, through the protection system, the safety of the room can be guaranteed. Another purpose of this function design is to meet the requirements of the fire station. When there is a fire in the house, it can cut the steel wire by itself and quickly escape from the window.