Emergency plan for hospital electrical safety

Emergency plan for hospital electrical safety

In our daily life, some unexpected things will inevitably happen. In order to control the development of accidents, it is often necessary to make emergency plans in advance. How to prepare an emergency plan? The following is my emergency plan for hospital electricity safety for your reference, hoping to help friends in need.

First, set the purpose.

In order to ensure the safety of hospital medical electricity consumption, ensure the safety of patients' treatment, avoid undue property losses, ensure the safety of hospital electricity consumption, promote the institutionalization and standardization of power outage emergency plan, and organize the rapid and orderly restoration of power supply, this plan is formulated in accordance with relevant national laws and regulations and the actual situation of our hospital.

Second, the emergency principle

The treatment of power failure accidents follows the principles of "prevention first, persistent efforts" and "unified leadership, perfect mechanism, clear responsibility, strengthened cooperation, quick response and decisive measures".

Third, organization

Under the leadership of the Logistics Supervision Committee of the General Affairs Department of the hospital, a leading group for emergency handling of comprehensive safety accidents and an emergency repair team were established.

Team leader: xx

Member: xxx

1. responsibilities: do a good job in daily safe power supply, implement the power supply safety responsibility system, and prevent power failure accidents; In case of power failure, do a good job in emergency treatment of power failure and restore power supply as soon as possible; According to the severity of power failure or accident, decide to start and terminate the emergency plan; Report the power outage to the superior in time and announce it to the whole hospital, and request external support when necessary; The leader of the leading group is generally responsible for fulfilling the provisions of this plan. Under the unified command of the leading group, all members will carry out their duties and cooperate with each other to do a good job in comprehensive emergency work in case of power failure.

2, electric emergency repair team:

Captain: Zhou 13966724478

Member: member of mechanical and electrical department

Responsibilities: Organize personnel to carry out rescue in case of power failure; Report the power outage to the command team, summarize the experience and lessons of emergency rescue work afterwards, and make relevant records.

Fourth, emergency procedures.

Comprehensive security

In case of unexpected power failure, the General Affairs Department is generally responsible for coordinating the emergency repair team, Zhongankang electrician class, power distribution room and special line. Relevant departments shall take relevant measures according to the plan to minimize the impact caused by power failure, reduce possible hazards and ensure safety.

1, emergency procedures for planned power outage

(1) When the mechanical and electrical department receives an incoming call or other forms of power outage notice, it must ask about the power outage time, stop time and power outage reason, and make records;

(2) Call the General Affairs Department (638694 14), the Security Service Acceptance Center (63869556) and the administrative supervisor on duty (6386963 1), make records and complete the preparations for switching the standby power supply.

(3) During normal working hours, if time permits, the hospital office will issue a notice to the whole hospital (the repair team leader is responsible for coordinating this work);

(4) If time is urgent, notify the emergency leading group immediately after receiving the notice from the power supply company (notify the chief attendant in the evening), listen to the arrangement of the emergency leading group, explain the situation, and the Ankang Acceptance Section will send a notice to all clinical departments. Important departments should inform the head nurse and department director of the time to stop sending electricity, and make a plan to stop sending electricity.

(5) Go to the transformer room 30 minutes before the power failure, and do a good job of pre-inspection of standby power supply switching. In case of power failure, the standby power supply must be started and transmitted normally.

(6) Before the power failure 10 minutes, all passenger elevators stop at the L building and post them outside the elevator.

(7) 1 # After the power failure of the special line of Furong Substation, send the standby line of No.2 Shibagang Substation according to the operation procedures, verify the voltage and current data, and send someone to the important department to switch the standby power supply and verify the power supply.

(8) When all external double power supplies are out of power, start the generator power supply to ensure the power supply for important departments of the hospital, fire fighting and emergency lighting.

(9) Record the operation of standby power supply and standby power generation, as well as the records after the recovery of commercial power.

(10) After the power supply returns to normal, verify the power supply situation of each department and summarize it.

2, sudden power failure emergency procedures

(1) In case of temporary power failure, you should immediately call the power supply company to find out the reason and duration of power failure.

(2) Call the General Affairs Department (638694 14), the security service acceptance center (63869556) and the administrative supervisor (6386963 1) and make records. The emergency repair team leader should refer to the above-mentioned emergency procedures for planned power outage and do a good job of notification and explanation.

(3) The operation personnel of the electromechanical group should immediately prepare to switch the standby secondary power supply and complete the switch within 30 seconds. When the second affiliated hospital of Anyi University installed the residual current protector on each floor, the PA device of the terminal power supply was not installed properly. Emergency rescue team members need to manually reset the floors of the north-south building, the administrative building, the outpatient and emergency building and the experimental building in the inpatient department layer by layer before they can use electricity normally.

(4) When the dual power supply cannot be started for various reasons, the standby generator should be started within 5 minutes to ensure the power supply of important departments, fire fighting and emergency lighting in the hospital.

(5) Record the operation of standby power supply and generator.

(6) When there is a power outage due to internal reasons in the hospital, it is necessary to find out the cause of the power outage, whether it is a high-voltage circuit or a low-voltage electrical practice. If the high-voltage circuit fails, contact the emergency repair team of the power supply department in time to recover as soon as possible to ensure power consumption; If the hospital's low-voltage circuit fails, the property mechanical and electrical repair personnel should quickly find out the reason, restore power supply according to the operating procedures, and make a summary afterwards.

3, department emergency procedures

(1) After receiving the power outage notice, all departments should cut off all the equipment and its power supply when allowed, and put it into use after the circuit returns to normal.

(2) After receiving the power outage notice, immediately prepare for the power outage. If there is a rescue patient, use the backup power supply.

(3) After sudden power failure, immediately look for dynamic methods to rescue patients and their operations, maintain rescue work, and turn on emergency lights. And shall immediately notify the acceptance center or the chief attendant.

(4) Patients who use a ventilator in critically ill patients' surgery should have a simple ventilator beside the machine at ordinary times. Once the power is suddenly cut off, the medical staff will immediately disconnect the ventilator and use a simple ventilator to maintain breathing. For patients who use electric nitrogen absorption, use a 50ML syringe to connect the nitrogen absorption tube to absorb nitrogen.

(5) If the two lines suddenly lose power, the medical staff should first ensure the patient's rescue, and then be powered by the generator in the hospital; Nurses should be calm, hold the ball with both hands when going to the ventilator, measure blood pressure and pulse manually when going to the monitor, and use a 50 ml syringe to connect the nitrogen suction tube for electric nitrogen absorption. Observe carefully and ask for change. The rest of the staff immediately called the mechanical and electrical department and used emergency lights to illuminate.

(6) Strengthen patrol ward, appease patients and pay attention to fire prevention and theft prevention.

(7) After the elevator encounters a sudden power failure, the logistics personnel should do a good job in the ideological work of passengers, make a phone call to the outside world, and manually release all passengers.

Medical security:

In order to effectively prevent, timely control and reduce the harm of sudden power outages, and guide and standardize the harm caused by such incidents to medical safety, medical care needs to coordinate the following work.

(1) All departments should prepare flashlights, candles and oxygen cylinders. Daily, regular inspection, keep it in good condition and put it at your fingertips;

(2) Strengthen ward patrol, appease patients and pay attention to fire prevention and theft prevention;

(3) After the normal power supply is restored, special equipment, such as computer-controlled CT and MRI, must be re-tested to the standby state.

Verb (abbreviation of verb) Handling procedure of large-scale power failure caused by sudden fire in transformer room

1, immediately notify the security service acceptance center (63869556) and the emergency repair team leader (technical director), and explain the fire size and power outage range on the phone. The personnel on duty should unlock the power distribution room so that emergency personnel can enter.

Under normal circumstances, when there is a sudden fire in the distribution room, its automatic gas fire extinguishing device will automatically start. If the automatic device is not started, the emergency repair personnel should cut off the power supply of the affected lines or equipment and use the fire extinguisher in the distribution room to effectively extinguish the fire. Be careful not to be knocked down by smoke when putting out the fire.

Personnel entering the power distribution room for emergency rescue should accept the command of the duty officer or guardian in the power distribution room to avoid expanding the scope of power outage.

According to the policy of putting prevention first, we should equip enough fire-fighting equipment and certain fire-fighting breathing apparatus at ordinary times.

6. Procedures for handling large-scale power failure caused by sudden floods.

1, according to the policy of putting prevention first, before the rainy season comes, we should make good preparations for waterproofing and disaster prevention in the distribution room, equip with flood control tools, and check the drainage equipment to ensure that the drainage pump can work normally.

2. In case of heavy rain, the personnel on duty should strengthen the inspection of the transformer room. When it is found that the power distribution room is in danger of water ingress, the personnel on duty should immediately report the situation to the captain of the emergency repair team and the service acceptance center, and organize emergency rescue.

3. If water is not harmful to the safe operation of power distribution equipment, pay close attention to the change of water regime, and organize personnel to conduct drainage and plugging.

4. If water is harmful to the safe operation of power distribution equipment, the power supply to the equipment that may be flooded should be cut off immediately, and at the same time, the service acceptance center should report the situation to the head of the emergency leading group of the General Affairs Department and the affected departments, explain the reason and scope of the power outage, ensure personal and equipment safety, and organize personnel to conduct drainage and plugging.

Seven, to deal with the windy weather caused by a large area of power outage procedures.

1, in windy weather, the personnel on duty should pay attention to the operation of overhead lines when patrolling.

2. When wires are found to be disconnected, the line power switch should be turned off for power failure treatment. At the same time, the service acceptance center should report the situation to the captain of the emergency repair team, the leader of the emergency leading group of the General Affairs Department and the affected departments, explaining the reasons and scope of power failure in detail. Under the condition of ensuring the personal safety of emergency repair personnel, organize emergency repair to restore power supply.

3. In case of power failure, a protective fence should be set at a safe distance to prevent people from approaching, and the power supply emergency repair department should be notified for handling.

Eight, the process of dealing with large-scale power outages caused by lightning.

1, lightning protection facilities should be maintained at ordinary times to ensure normal operation.

2. In case of power failure caused by lightning strike on distribution equipment and facilities in thunderstorm weather, immediately report the situation to the emergency repair team leader and the head of the emergency leading group of the General Affairs Department, and explain the reasons and scope of power failure.

3, organize personnel to check the line in the case of safety, troubleshooting rear can send.

Nine. safeguard measure

1. The employees of the electromechanical department should do a good job of maintaining the generator every day to ensure that the generator can be put into use at any time.

2. Electricians should master power supply knowledge and operation specifications at ordinary times, the electromechanical department should do daily training, and the general affairs department is responsible for the assessment.

3, clinical departments are routinely equipped with emergency lights, flashlights and other lighting objects, regular inspection, keep in good condition.

;