Job Recruitment Website - Property management - How to avoid pits when decorating white?

How to avoid pits when decorating white?

1. The blank house must be demolished and charged. Do quality standards, don't be lucky.

2. The whitewashing of rough houses must be eradicated, and there is a cost. Do quality standards, don't be lucky.

3. The bare wall of the blank room must be treated, which has cost. It is not a fluke that the quality reaches the standard.

4. The blank room first looks at whether there is an air conditioning hole, whether it is equipped with a cabinet machine or hung up; Is there a water heater vent, a bathroom and a kitchen check valve, otherwise these will all incur costs. If there is no room inspection above, you can ask the property to handle it for free.

5. When water and electricity enter the site, remember that the pricing is inconsistent with the actual situation, otherwise there is no upper limit for the cost. Hydropower materials are generally contracted, and the owner of the water main valve buys it himself, otherwise the developer's valve can only be used. 6. The bathroom waterproof is made according to the pattern, and each house is different. Don't think it's good to have waterproof. If it breaks down in the future, you may go bankrupt (remember how to make waterproof before decoration, otherwise the decoration will be done in vain).

7. Whether the kitchen is waterproof or not depends on the floor drain, otherwise you will lose everything.

8. The bricklayer's construction is calculated according to the area and the variety of bricks. As long as the normal expansion joints (1mm joints) are reserved for ordinary vitrified bricks, they will be charged, that is, no matter what the specifications of bricks are not very small, less than 300*300 or not very large, more than 800*800. As long as the normal connector is kept, it will be charged normally. 1mm or more clip tiles are more expensive than ordinary ones. All irregular paving costs are higher than normal paving costs. Don't be ignorant of cutting normal tiles, or you will have to leave seams, which will cost you. Be sure to make it clear in the early stage, or you will not recognize the money when you add money during construction.