Disassembly steps of elevator brake without machine room

Is the disassembly you are talking about a disassembly step? If the brake is removed and replaced, the steps are as follows:

1. Repair the elevator to the position where it can get on the top of the car; 2. Open the hall door and enter the car roof, carrying the brakes that need to be replaced; 3. Drive the maintenance elevator to the fixed position of the shaft; 4. Fix the car roof fixing pin and confirm the action of the safety switch; 5. Check whether it is convenient for disassembly operation; 6. Disconnect the main power supply; 7. Remove the brakes and replace them with new ones.

If the brakes are completely damaged, the car can't run. Then the replacement operation of the brake can only be completed through the guide rail support frame.

If you are talking about disassembling the brake parts, please refer to the brake instruction manual. And because there are many kinds of brakes, it is impossible to describe them one by one.