Will air conditioning holes pollute the wall? How to prevent air conditioning holes from polluting the wall?

Everyone usually needs to make holes when installing air conditioners. Some people forget to drill holes when decorating their houses, and when installing air conditioners, they will be more worried that drilling holes will pollute the walls. So, will air conditioning holes pollute the wall? How to prevent air conditioning punching from polluting the wall?

1. Will air conditioning holes pollute the wall? 1. Will air conditioning holes pollute the wall? Now the air conditioner is perforated, and you can use rhinestones. This will lead to the discharge of waste water without polluting the walls. If we don't add water to the drill bit, it will not only damage the drill bit, but also produce a lot of dust inside. Although the infiltrated air will pollute the wall, don't worry too much. It's not very polluted. Cleaning in time with a rag is usually ineffective.

2. Will punching holes in the air conditioner pollute the wall? If we punch holes in the decoration, air conditioning has little effect on polluting the wall. Because when decorating the wall, it can be covered without affecting the beauty of the wall. Will air-conditioning holes dirty the walls? If we drill holes after decorating the wall, we can cover the nearby ground and wall with plastic bags to avoid soiling the wall when drilling.

3. Will air-conditioning punching pollute the wall? If we intend to use a dry rig, we may also damage the wall. Because a large piece of dry dust will turn the whole room gray. In order to avoid soiling the wall during air conditioning. We can put post-it notes on some drilled holes, then find a box to put on the drill bit and wrap some sponges. By drilling holes in this way, dust is collected in the box, and the dust will be effectively reduced.

Second, how to prevent the air conditioner from punching and soiling the wall? 1. Cover the walls and floors of the air conditioner with plastic bags and seal the edges with adhesive tape. Ash and mud produced during drilling will flow down the film, effectively preventing water loss. Place a carton or mat at the bottom to prevent debris from hitting the ground.

2. Cover the tape first, and then close the tape with a box. At this time, the water and mud produced by the scenic spot will enter the box. At this time, it is necessary to pay attention to the tape sealing, otherwise the dirt will flow through the unsealed place.

3. Stick a piece of cardboard in the hole area, fix it with adhesive tape, and then hang it on both sides with large plastic bags. Ash and mud will also fall into the bag along the paper.

4. Find an unused shoe box, wrap the drill and put it away. Use some sealing sponges at the hole of the shoe box to make the shoe box close to the wall, preferably around the hole.

5. If conditions permit, you can choose to punch holes from the outer wall. When the drill bit is hit, it will tilt slightly upward, which may leave ash and mud. Fill it with a clean rag to avoid the wall being polluted by ash.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~