Job Recruitment Website - Property management - Who is responsible for replacing the broken household air in the corridor?

Who is responsible for replacing the broken household air in the corridor?

Legal analysis: the property should be responsible for the burnt wire of the distribution box of the residential corridor. The owner is responsible for the distribution box in the household.

Legal basis: Standard model of fire causes and prevention methods for electrical lines (1). Install lines as required. Electrical wiring must be installed in strict accordance with the electrical installation regulations, and special electricians should be invited for wiring. Electricians must hold relevant certificates. (2) Choose the correct electrical circuit. According to the actual needs in work and life, and in view of the load that may be caused, choose the electrical circuit with appropriate specifications. Don't use too thin or inferior wires for petty gain. Pay attention to whether the physical examination can be a qualified product when choosing wires.

(3) the safe use of electrical lines. Don't connect the installed electrical lines or install electrical devices at will, which will increase the power load of the whole line. Pay attention to the maximum load of the circuit used, and do not exceed this limit during use, otherwise it will easily lead to accidents.

(four) regular physical examination of electrical wiring. It is necessary to have an unscheduled physical examination. Please ask a special electrician to help with the physical examination of electrical lines every once in a while. If the insulation layer is found to be damaged, it should be repaired in time. The service life of wires is usually 10 ~ 20 years, and those found to be over-aged must be replaced in time.

(5) Choose a safe electrical switch. Choose an air switch with high safety factor and try not to use a knife switch. When the knife switch is turned on and off, it will produce electric spark, which is easy to cause danger. The choice of air switch can prevent power failure. When using fuses, choose the appropriate fuse to avoid failure. When the current increases, the current can be cut off in time.