What should I pay attention to in hydropower installation?

When installing water and electricity, the pipeline should be slotted first, which includes two aspects: one is the slotting of water pipes, and the other is the slotting of wires. When the pipeline is slotted, the owner shall personally go to the site to check the quality, to ensure that the horizontal and vertical lines are well played before slotting, and the construction shall be carried out according to the lines.

2, water pipe installation

The installation of water pipes is very important in hydropower installation. The materials used for water pipes are mostly PPR pipes and aluminum-plastic pipes, and attention should be paid to the placement of faucets when installing water pipes. It is best for the owner to personally supervise and observe to ensure its practicability.

3, wire wiring

Electric wire is the key material in hydropower installation, and the common electric wire in the market is copper core wire of 2.5-6 square meters or more. When installing wires, separate high and low voltage wires, switches, air conditioning sockets and electrical sockets, so that the backplane installation will be smoother.

4, water pipe inspection

After the completion of the construction, it is necessary to carefully check whether there are quality problems in the water pipes and eliminate the hidden dangers of waterway safety. During inspection, pressure test can be used. Gamble all your mouths to death with the gambling head first, and then use the pressure gauge to test the water. After pressing, check all pipes and all joints. If there is no water leakage, the water pipe installation is qualified.

What should I pay attention to in hydropower installation?

1. When designing waterways, we must first think about all water-related equipment, such as water heaters, water purifiers, washing machines, toilets, washbasins, etc., and think about the installation location, methods and whether hot water is needed.

2. In addition to the washbasin, mop pool, washing machine and other outlets, it is best to install a faucet in the bathroom to facilitate flushing in the future.

3. It is best to have the property present when suppressing the test, which can play a supervisory role and prevent some decoration teams from deceiving the owners. The method of pressing is: open the "return valve" of the pressing pump to form a loop, and check whether there is pressure inside, especially the electric pressing pump, and everyone should pay more attention.

4. After the waterway is installed, it is necessary to check whether the waterways in various places are unblocked, such as whether the faucets in the kitchen, bathroom and balcony are unblocked. If slow or poor drainage is found, the property should be dredged in time.