How much is the floor heating suppression? What are the floor heating pressing processes?

I believe everyone is familiar with floor heating. Geothermal is also called floor heating. It has good heating effect, energy saving and environmental protection, and the use cost is very low. So now many families have started to use it. About floor heating, today Bian Xiao will tell you about how to charge for floor heating suppression and the content of floor heating suppression technology standard!

How much is the floor heating suppression?

When the floor heating is suppressed, it is usually done when the property is handed over. Floor heating is mainly divided into two ways: water pressure and air pressure, which are generally free. The price of floor heating and radiator is different. Radiator 100 yuan, floor heating is one square 5 yuan, which is the settlement price between workers and the company.

Preventive measures to restrain floor heating

1. If winter is restrained, anti-freezing measures should be taken.

2. When pressing, it depends on whether the pressure value is normal. The pressure difference is very important, because the greater the pressure difference, the faster the circulation will be, so as to continuously provide heat.

3. When the floor heating is tested for water injection, the water injection speed must be slow. When the system is full of water, carefully check the tightness of each loop to prevent inaccurate data.

4. After the final pressure test, release water through pressure relief, and at the same time, make corresponding suppression records and file them for future reference.

There are many precautions in the process of floor heating suppression. In fact, floor heating suppression and decoration are the same. Whether the preliminary project is qualified depends mainly on whether the user is satisfied with the house inspection, and the function of the suppression test is to "measure the quality". Therefore, it is best to choose a professional floor heating installation company to be responsible for stress testing. On the one hand, the technology of professional companies is trustworthy, on the other hand, it can avoid future influence.

What are the floor heating pressing processes?

1. When pressing, firstly, use the hydraulic pump to inject water into the floor heating system based on the water collectors of each component, and at the same time, it is necessary to exhaust the gas in the system pipeline. It should be noted that floor heating suppression is a highly technical job, and professional masters must be invited to help.

2. Then slowly boost the floor heating to 0.6Mpa or 1.5 times the working pressure of the system.

3. In the process of boosting pressure, it is necessary to observe and check the pipeline of floor heating at any time to see whether there is any leakage between the connection point of the pipeline and the distribution manifold, and between the distribution manifold and its joint, which is the key to restrain floor heating.

4. Check whether there is any leakage point after stabilizing the voltage for one hour.

5. After no leakage is confirmed, raise the pressure to 0.6Mpa, and finally observe 15 minutes. When the pressure drops to less than 0.03Mpa, the inhibition is qualified.