How to change the circuit in a hardcover room? Does the hardcover housing reform circuit need to hit the wall? Circuit steps of hardcover housing reform

Hydropower is a relatively hidden project. If you want to make changes after decoration, you must make major changes to the surface decoration, even the tiles and waterproofing should be redone. Therefore, if there is no serious water and electricity problem in the hardcover room, don't transform it. Next, let's take a look at how to change the circuit of the hardcover room, whether the circuit of the hardcover room needs to hit the wall and the related contents of the circuit steps of the hardcover room, hoping to help everyone.

First, how to change the circuit in the hardcover room?

1, hydropower is a relatively hidden project. If you want to make changes after the decoration, you must make major changes to the surface decoration, even the tiles and waterproofing, and the difficulty and cost of the secondary construction will increase. Therefore, if the hardcover room has no particularly serious water and electricity problems, don't decorate it.

2. If you need to carry out hydropower transformation, you must find an expert to carry out the construction, and then leave enough time to understand the hydropower structure of the house. The hydropower project is invisible on the surface, and the transformation should be carried out on the premise of certainty.

3. When developers carry out hardcover, most of them will take the pipeline to the ground, so it is better to take the top floor when the waterway is rebuilt, which is safer. If there are problems after renovation, such as water leakage at the top, the responsibility will be more clear.

4. When the circuit is reformed, it is necessary to consider whether the circuit wire diameter used in the reform is the same as that used by the developer. It is best to use products with the same wire diameter, because it is useless for the original circuit wire diameter to change from small to large, and it is not safe to change from large to small.

Second, does the hardcover housing reform circuit need to hit a wall?

1, hardcover room decoration, no need to smash the wall to change water and electricity. Now when the hardcover room is delivered, it has basically reached the level of direct occupancy after buying furniture and electrical appliances. If the decoration requirements of the house pattern are not high, not only do you need to smash the wall to change water and electricity, but even the decoration is not needed.

2. Because the rooms designed by developers are unified, but some owners have high preferences and requirements for housing, if you live in the original pattern in order to save trouble and money, it will also have an impact on your future life.

3, so as long as necessary, you can change the wall, but it must be clear that when you smash the wall, you must go through the property audit, because some walls can be smashed, and some walls can't be smashed.

Third, hardcover housing reform circuit steps

1, before the circuit transformation, locate the circuit, switch socket, lamps, air conditioner, etc. And you need a manuscript in your heart.

2. After the positioning is determined, the electrician will carry out slotting and wiring according to the positioning and line direction, and the slotting should be horizontal and vertical. Next, make wiring. Buried pipes are usually used. There are two kinds of conduit, one is cold-formed pipe and the other is PVC pipe.

The above is about how to change the circuit in the hardcover room, whether the circuit needs to be broken, and the steps to change the circuit in the hardcover room. Thank you for reading. Want to know more about the circuit of hardcover housing reform, please continue to pay attention to the hunting network.