Three copies of monthly work plan for production safety.

Safety in production is a long-term basic national policy, a basic guarantee for protecting workers' safety, health and property, promoting the development of social productive forces, and also a basic condition for ensuring the development of socialist economy and further implementing reform and opening up. Therefore, it is of great significance to do a good job in safety production. This article about "Three Work Arrangements for Work Safety Month" is for everyone, and I hope it will help you!

Tisch

First, leaders attach great importance to the comprehensive management of production safety.

In order to further improve the safety production management level of our project department and strengthen the leadership of the project department on safety production, the safety work of the project department is put on the important agenda, which is directly grasped by the project manager and specifically grasped by the deputy project manager. The heads of departments, subcontractors and on-site safety officers are responsible for organizing the implementation, and the safety production management of the project department is carried out in an all-round way, forming a good situation of * * management with leaders above and personnel below.

Second, organize measures to improve the safety system

According to the requirements of the company and its branches, the safety production management system has been established and improved, the leadership has been strengthened, and the division of labor is clear. The project manager is responsible for the safety of the whole project, and the deputy project manager is in charge of the safety production of the project. The project department shall set up full-time safety officers to comprehensively supervise and guide on-site safety production, and set up compulsory safety officers to timely understand and feedback on-site safety information. According to the characteristics of this project, the safety production system and various guarantee measures of each project are reasonably compiled. Organize and implement the construction of safety production system, provide strong system and organizational guarantee for project safety production, and provide favorable preconditions for safety production work.

Third, the system guarantee, measures in place

1. Establish the leadership responsibility system and accountability system for production safety. The assistant project manager is responsible for bringing safety in production into the target assessment content of each team, conducting strict assessment on a regular basis and strictly implementing the responsibility system. If a major safety accident is caused, the responsibility of the relevant leaders and the person directly responsible should be seriously investigated.

3. Continuously improve the safety production rules and regulations of the project department. Establish and improve the safety construction rules and regulations of the project department, and constantly improve and enrich them according to the development of the safety production situation. Establish and improve the safety production management system combining regular inspection with daily prevention.

4, the establishment of project safety accident disposal plan system. The project department set up an accident emergency rescue leading group and formulated an emergency plan system to deal with safety accidents.

Four, increase the intensity of technical disclosure of production safety, improve the standard operation ability.

Because the construction personnel of each sub-team come from different places, their educational level and professional ability are uneven, which brings certain difficulties to the safety production management of engineering construction. To this end, the security personnel of the project department shall organize the on-site construction personnel to make safety disclosure for each sub-project before the commencement of each sub-project, so that the construction personnel can understand the requirements of various operating procedures and specifications, thus standardizing the construction safety and laying a solid theoretical foundation for safe production. Secondly, organize on-site safety management personnel to carry out training, so that they can understand the relevant regulations and operational requirements of safety production, improve the policy and theoretical level of safety management personnel, and strengthen their sense of responsibility.

Fifth, strengthen safety publicity, and make the construction team receive safety education in the process of construction and production. Safety production education is not a dispensable job, but the most important part of safety production in the project department. Our guiding ideology for safe production is safety first, prevention first and comprehensive management. Therefore, safety education is the premise of putting prevention first. In the work of safety production education, we should not only talk about it at the meeting, but also go to school. Over the past year, the project department has invested a lot of money and manpower in publicity and education. At the construction site, in order to ensure safe and civilized construction, tens of thousands of safety production and civilized construction signs were made. According to the construction characteristics of each sub-project, the signs and signs of different construction sites will be changed irregularly, so as to educate the on-site construction personnel in the construction process and give a warning at the same time, and fundamentally put an end to all kinds of safety accidents.

Six, strict inspection system, eliminate security risks.

According to the different priorities of safety production in different periods, the project department organizes relevant personnel to systematically inspect the key parts of safety production, and sends people to track and check the hidden safety hazards found out for rectification within the specified time, and conduct informed criticism at the weekly project meeting. For serious safety hazards, the construction team leader is required to be present to supervise personally until the rectification is completed and reported to the project department, and the construction can only be started after the approval of the safety management personnel. This year, * * * organized 12 major inspections, * * * found 48 potential safety hazards, and rectified 48, with a rectification rate of 100%.

Seven, the distribution of protective equipment and various emergency plans and drills.

According to the requirements of construction specifications, you must wear a safety helmet when entering the construction site. When working high above the ground, the construction personnel must wear safety helmets and fasten safety belts and safety ropes. To this end, the project department requires all construction teams to distribute the protective articles required by each sub-project to each construction worker before the sub-project starts, and wear them well before the construction enters the construction site. Through spot checks, the penetration rate of protective articles reached 100%. In order to effectively prevent all kinds of accidents and quickly and effectively rescue possible safety accidents on site, the project department has compiled relevant special emergency plans according to the requirements of safety production specifications and the requirements of the owner.

extreme

In this year's safety production work, our factory has taken effective measures and done a lot of work, eliminating many potential safety hazards. While making achievements, the safety production situation in our factory is still grim, and the safety management work is endless. In the future work of safety management, our factory will, according to the actual situation, clarify the responsibilities, intensify the work, make the work of safety production thorough, practical and lasting, and ensure the stability of the situation of safety production in the whole factory. Therefore, next year we will focus on the following aspects to carry out work safety:

1, according to the actual situation of our factory, establish and improve all aspects of safety production rules and regulations, operating procedures, make our factory safety management institutionalized and standardized, and make our factory safety management level reach a new level;

2. To further implement and improve the responsibility system for production safety, all departments and workshops should sign the responsibility book for production safety with the factory to ensure that the responsibility system for production safety is implemented; Improve the accountability system for safety production, so that the responsibility for safety production can be truly implemented by every employee, especially the production and safety management personnel in the production line, and create an enterprise safety culture atmosphere in which all employees participate in safety management;

3, equipped with safety management personnel as required, according to the specification to complete the layout of the factory safety facilities, increase investment in safety funds, to ensure that the safety funds are rich and in place, at the same time, the safety work barrier forward, based on prevention, pay close attention to three violations;

4. Intensify the propaganda of safety production, improve the safety production awareness and safety culture quality of all employees, enhance employees' awareness of self-protection, conscientiously publicize and implement the party and state policies on safety production, and do a good job in the implementation of various safety rectification measures;

5. Strengthen the safety education and training of employees in our factory, extensively carry out safety production skills training, comprehensively improve the safety production awareness and safety production skills of managers and production employees at all levels of the enterprise, and establish a safety production management team and staff team with excellent political quality and comprehensive technology;

6. Strengthen the fire safety management of our factory, and organize a fire drill for the employees of the whole factory once a month, so as to improve the quick response ability of our factory after the fire, minimize casualties and reduce the property loss of the factory. At the same time, install enough fire-fighting facilities in the factory area as required, strengthen fire management in key fire-fighting areas, and make frequent patrols, frequent discoveries and frequent solutions to eliminate all kinds of fire hazards;

7. Earnestly carry out various safety production inspections in accordance with the safety management system formulated by the factory, carry out safety production inspections and safety meetings at least twice a month, intensify the investigation of hidden dangers of accidents, and carry out special treatment of various safety hazards to ensure timely discovery and timely resolution of existing safety hazards and prevent the occurrence of safety accidents;

8. Strengthen the use of special equipment and the safety management of special operators, strictly implement the system of holding certificates for special operators, and conduct self-inspection on special equipment in time to prevent special equipment from operating in spite of illness and prevent safety accidents;

The work of safety production management is endless. Our factory will conscientiously implement the policy of safety first, prevention first and comprehensive management, strengthen safety production management, implement various safety management work, strive to create an enterprise safety culture atmosphere in which all employees participate in safety management work, do a good job in various safety production management work in the factory, and make unremitting efforts to create a good safety production environment and effectively protect people's lives and property safety.

Tisso

I. Rectification inspection

1. Before New Year's Day and Spring Festival, it is planned to conduct a comprehensive inspection of the heating facilities of all households in the company, which will be conducted in two groups for one day. Conduct a comprehensive inspection of stoves, chimneys and firewalls, timely rectify hidden dangers and prevent soot poisoning accidents.

2. It is planned to conduct a safety inspection on the company's oil refining workshop, threshing floor, warehouse, water well and high and low voltage lines before the summer harvest, and rectify the unqualified lines within a time limit, and invest some rectification funds to ensure thorough rectification.

3. It is planned to conduct a safety inspection on threshing field, seed selector, thresher, sheller, field transportation, field mechanical harvesting and other equipment at the beginning of autumn harvest to ensure the smooth progress of autumn harvest.

Second, spot checks

1. Before spring ploughing, it is planned to inspect the maintenance and verification of agricultural locomotives throughout the company. For unqualified locomotives, field work is not allowed to avoid agricultural machinery accidents.

2. It is planned to carry out safety inspection on lighting lines of the whole company at the end of May, and notify residents of unqualified lines to rectify in time to prevent electric shock accidents.

3, arrange a monthly inspection, no matter in production and life, found hidden dangers, timely rectification, there is no hidden danger.

4. During the oil refining period, conduct spot checks on the oil refining situation in the workshop, stop work and make rectification when problems are found, ensure the safety of oil refining, and pay equal attention to oil refining and safety.

5. During my stay in Sanqiu, I will organize special personnel to carry out the work of safe production in threshing, seed selection, threshing and transportation, and conduct random checks from time to time, and criticize and educate people and things who fail to perform safety responsibilities and operating procedures to prevent accidents.