What if the car is rubbed?

Hello, solutions to different degrees of scratches:

1, scrape

The car has scratches, and the best repair method is to fill the scars with the same coating agent as the car body. The coating agent can be applied once, twice or three times. The more times, the cleaner it will be, but it is also important to treat the whole body evenly.

2. Minor abrasions

If the corrosion is not very serious, you can first gently polish the rust spots with very fine water sandpaper dipped in water, but don't grind them indiscriminately, but polish them in the same direction. After wiping completely, apply a layer of primer. If it is a new scratch, it can be directly primed after wiping. After that, if the vehicle is loaded with small cans of original paint, you can wait for the primer to dry, then smooth it with water sandpaper and apply the original paint on the primer. If not,

3, small scars

If it is only a shallow scratch on the surface paint, immediately treat it with the mixture. The wiping method is linear wiping. After the scratch disappears, wipe it with a finer mixture and wax it.

4. No primer scar was found in the deep part.

If the car is scraped deeply, but the metal surface can't be seen, it won't rust. You can concentrate on applying decorative paint, click it with a pen tip, and then wait until the paint is completely dry before applying fine wax.

5. Deep visible primer scar

If you can see the color of the undercoat, it depends on the scar. Generally, the bumpers, rearview mirrors and wheel eyebrows of some cars are all engineering plastics and will not rust. Whether to touch up the paint depends on the owner's own requirements. But if these serious scars appear in other parts of the car body, you need to touch up the paint, otherwise the steel plate will start to rust even if it is a small damage. Even if it is patched up, it will be difficult to rust. Car owners can wash their cars first. Apply rust remover to the scratch, and wipe it off with a paper towel after 10~ 15 minutes to avoid further rust at the scratch.

6. Deep and thin scars

For this kind of scar, color putty can be used to repair it well. Use sandpaper to polish the scar, and don't enlarge the scar surface casually. The important thing is to clean up the dirt, carefully apply putty to make it completely enter the interior, and finally apply the mixture to wax and end the work.