Job Recruitment Website - Property management - Decoration hydropower construction contract

Decoration hydropower construction contract

Template of decoration and hydropower construction contract (select 5 pieces)

With the deepening of people's understanding of the law, more and more scenes and occasions need to use contracts, which is also an important measure to reduce and prevent disputes. So what are the common contracts? The following is a sample (5 selected) of the renovation hydropower construction contract I compiled, hoping to help you.

1 Decoration hydropower construction contract Party A: _ _ _ _ _ _ _ (the Employer)

Party B: _ _ _ _ _ _ (contractor)

Based on the principle of mutual trust, the following agreement is reached on Party A's hydropower project.

The first decoration construction site, time limit for a project and cost.

1. Decoration construction site: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

2. Construction period: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

The estimated cost of this project is RMB.

Article 2 Material Supply Agreement

Party B must submit the list of materials to be purchased in the next process to Party A at least three days in advance, and indicate the quantity of materials required. Party A shall provide the materials required by Party B on time.

Party A is responsible for purchasing and supplying qualified products that meet the design requirements, and supplying them to the site on time, and both parties shall handle the handover procedures. If Party B finds any quality problems or specification differences in the materials provided by Party A, it shall promptly raise them with Party A, and Party A shall be responsible for the engineering losses caused by Party A's use.

After the materials supplied by Party A arrive at the site on time, Party B shall be responsible for keeping them, and Party B shall be responsible for compensating the losses caused by improper keeping.

Decorative materials purchased and supplied by Party A shall be used for residential decoration specified in this contract, and Party B shall not use them for other purposes without Party A's consent ... If Party B violates this regulation, it shall compensate Party A at double the price of misappropriated materials.

The hydropower materials provided by Party B shall be accepted by Party A on site. Do not meet the design and construction requirements or specifications are inconsistent, shall not be used. If it has been used, Party B shall be responsible for the losses caused to the project.

Party B shall carry necessary tools (awls, cutting pieces, etc.). ) for construction. In order to ensure safety and good service performance, Party B shall bear the maintenance and loss expenses of the tools.

Article 3 Agreement on Project Quality and Acceptance

1. This project strictly implements the national Code for Construction of Residential Decoration Engineering (GB502 10-200 1) and Code for Quality Acceptance of Building Decoration Engineering (GB50327-200 1), and refers to the Quality Standard for Family Decoration Engineering in Fujian Province.

2. If quality problems are caused by Party B's poor construction technology and weak sense of responsibility, the rework cost shall be borne by Party B, and the construction period shall remain unchanged.

3. Project completion: Party B shall notify Party A of the acceptance two days in advance, and Party A shall organize the acceptance within two days after receiving the notice and go through the acceptance procedures.

Article 4 Agreement on Safety Production and Fire Control Site Management.

1. Strictly abide by the stipulated decoration construction time, reduce construction noise and environmental pollution. Deal with the problem of disturbing people by construction and the relationship with surrounding units and residents.

2. Without the consent of Party A and the approval of relevant departments, the original building structure and various equipment and pipelines shall not be dismantled and changed at will during construction.

3. Before the project is completed and handed over to Party A, be responsible for protecting all facilities and finished products on site.

4. Ensure the cleanliness of the decoration site, and do a good job of cleaning and handling before completion.

5. Responsible for handling the garbage generated by decoration, and cleaning it at least once a day.

6. If Party B needs to live on the site for construction reasons, he must pay attention to the safety of daily water and electricity consumption, and Party B shall be responsible for any work-related injuries that occur on the site.

7. Party B shall properly keep the construction materials and prohibit other personnel from entering the site.

8. Without Party A's permission, Party B shall not take any decoration materials provided by Party A out of the house. If it is found stolen, Party B shall pay double indemnity according to the material price.

Article 5 Agreement on project price, contract content, construction technology and settlement

1. Payment method of project funds:

Pay _ _ _ _ _ _% of the salary after the acceptance of pipeline laying, _ _ _ _ _ _% of the salary after the completion of water and electricity, and _ _ _ _ _ _ _% of the salary after the overall completion acceptance.

1) Slotting, wiring, threading and trench burying for hydropower.

2) All garbage shall be removed during hydropower construction (classified and bagged on site every day)

3) Wall penetration, punching and cutting in hydropower construction

4) Installation of switch panel

5) Installation of hardware, toilets, etc.

6) Installation of lamps and lanterns in the later period

2. Project settlement method:

According to the actual settlement:

Total settlement price: _ _ _ _ _ _ Yuan/m2 (interior area)

Article 6 Handling of breach of contract

1. If Party A fails to make payment within the time stipulated in this contract, Party A shall pay Party B a penalty of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. If the completion is overdue due to Party B's reasons, Party B shall pay Party A a penalty of RMB 50 yuan for each day overdue.

Article 7 Dispute handling methods

Disputes arising from the quality of the project shall be settled by both parties through consultation; If the parties are unwilling to settle the dispute through negotiation or mediation, or if negotiation or mediation fails, they may bring a lawsuit to the people's court in accordance with this contract.

Article 8 Modification and rescission of the contract

1. After this contract comes into effect after being signed by both parties, both parties must strictly abide by it. If either party needs to change the contents of the contract, it shall sign a supplementary agreement after consultation. Before the construction, after the contract is signed, if one party wants to terminate the contract, it shall make a written request, pay _ _ _% of the total contract price as penalty, and go through the cancellation procedures.

2. In the process of construction, if either party proposes to terminate the contract, it shall submit it to the other party in writing, and both parties agree to go through liquidation procedures, conclude a termination agreement and terminate the contract.

Article 9 Other agreements

1. Both parties agree to negotiate with a third-party supervision company (_ _ _ _ _ _ _ Jiarun Decoration Supervision Company).

Without the confirmation of the third-party supervision company (_ _ _ _ _ _ _ Jiarun Decoration Supervision Company), Party A has the right not to pay relevant fees to Party B. ..

2. After being confirmed by a third-party supervision company (_ _ _ _ _ _ _ Jiarun Decoration Supervision Company), Party A must pay relevant expenses to Party B as agreed.

3. If the construction period is delayed due to force majeure or unforeseeable factors such as climate and power failure, it can be postponed after confirmation by both parties.

4. Before entering the site, Party A may require Party B to go to the site five times to cooperate with the cross-construction of other types of work, and Party A shall pay Party B _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

5. During the warranty period, the quality problems caused by Party B's construction and products shall be repaired by Party B free of charge, and must arrive at the site within 48 hours after receiving Party A's notice ... For problems caused by Party A's improper use, force majeure or unforeseen reasons, Party A shall pay the maintenance fee to Party B according to the actual cost.

(1) This contract shall come into effect after being signed (sealed) by both parties.

(2) After signing this contract, the project shall not be subcontracted.

(3) This contract is made in duplicate, with each party holding one copy.

(4) This contract is valid until _ _ _ _ _ _ _ _ _ _.

(5) The warranty period of hydropower project is _ _ _ _ _ _ _ years. After the warranty period, Party B shall pay Party A the corresponding maintenance expenses. ..

Party A: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2 Party A (the Employer) Decoration Hydropower Construction Contract:

Party B (contractor):

Party A will now contract out the indoor water and electricity installation project of M38 and M39 fa? ades of Casio Garden 1# Building in Longhui County to Party B. In order to clarify the rights, obligations and responsibilities of both parties and ensure the quality and progress of the project, both parties have signed the following terms through friendly negotiation for common compliance.

I. Form of project entrustment:

The contract work does not include materials.

Second, the project price and settlement agreement:

1. Project price: calculated according to the construction area per square meter of 7 yuan.

2. Payment method of project funds: 60% of the salary will be paid after the pipeline laying is qualified, and the remaining 40% of the project funds will be settled on the day when the overall hydropower project is completed and qualified.

Three. Contents contracted by Party B:

(1) Slotting, pipe laying and threading of hydropower (wires, network cables, TV cables, telephone lines, etc.). )

(2) Installation of sockets, switches and lamps

(3) Installation of hardware and kitchen accessories

(4) All garbage in the process of hydropower construction should be classified and bagged.

Four. Requirements for Party B:

(1) Party B shall bring its own auxiliary tools required for construction, such as miter ladders, horse stools and shovels.

(2) Work closely with the workers of the main construction project, and do not shirk.

(3) If Party B needs to go to the site for the second time to cooperate with other types of work, Party B shall be present within 24 hours after receiving the notice from Party A..

(4) Before the completion of the project is handed over to Party A, be responsible for the protection of all facilities and finished products on site, and the hydropower project shall be guaranteed for three years.

This contract shall come into effect after being signed by both parties, and Party B shall not subcontract the project after signing. This contract is made in duplicate, one for each party.

Signature of Party A: Signature of Party B:

date month year

Contract 3 of renovation hydropower construction unit (Party B):

Engineering project:

Through friendly negotiation between Party A and Party B, Party A decides to entrust Party B to decorate the living room. In order to ensure the smooth progress of the project, in accordance with relevant national laws and regulations, this contract (including its annexes and all supplementary contracts) is hereby signed for * * * to abide by.

Article 1: Project Overview

1. Project address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Room specification: room type: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

1, _ _ _ _ _ _, which is _ _ _ _ square meters;

2._ _ _ _ _ _ Hall, which is _ _ _ _ _ square meters;

3, _ _ _ _ _ kitchen, meter _ _ _ _ square meters;

4, _ _ _ _ _ _ toilet, meter _ _ _ _ square meters;

5, _ _ _ _ _ balcony, meter _ _ _ _ _ square meters;

6._ _ _ _ aisle, _ _ _ _ _ square meters per meter;

7. Other (specify location) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ square meters.

Total: the construction area is _ _ _ _ _ _ _ _ square meters.

3. Construction content: See Annex (1) List of Home Decoration Construction Contents and Construction Drawings for details.

4. Entrustment method: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5. Project Commencement Date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6. Project completion date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Total days of the project: _ _ _ _ _ _

Article 2: Project Price

The project price (in words) is _ _ _ _ _ _ _ _ Yuan (in words).

1, material _ _ _ _ _ _ _ yuan; 2, labor costs _ _ _ _ _ _ _ yuan;

3. The design fee is _ _ _ _ _ _ yuan; 4, the construction freight _ _ _ _ _ _ yuan;

5. The handling fee is _ _ _ _ _ _ _ yuan; 6. The management fee is _ _ _ _ _ _ yuan;

7, tax (341%) _ _ _ _ _ _ yuan;

8. Other expenses (specify content) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Article 3: Quality Requirements

1. The varieties, specifications and names of the main materials used in the project shall be approved by both parties. See Annex (III) List of Final Accounts of Home Decoration Engineering Materials for details.

2. Regarding the acceptance standard of this project, both parties agree to refer to the Shanghai local standard DB 3 1/T30- 1999 Acceptance Standard for Residential Decoration.

3. In the process of construction, if Party A has special construction projects or special quality requirements, both parties shall sign a supplementary contract for the increased cost.

4. Shanghai Interior Decoration Industry Association Family Decoration Professional Committee.

5. The quality of all materials and equipment purchased by Party A shall be borne by Party A; Party B shall be responsible for the quality of the project.

6. If Party A hires a project supervisor, it shall notify Party B before the project starts, so as to facilitate the work connection.

Article 4: Supply of Materials

1. Party B shall clearly price the materials used in this contract in strict accordance with the relevant national price regulations. For details, please refer to Annex (II) Budget Table of Home Decoration Engineering Materials. The materials provided by Party A shall be used in the decoration project specified in this contract, and shall not be used for other purposes without Party A's consent ... If Party B uses them for other purposes, Party B shall compensate Party A at double the price of the misappropriated materials.

2. If the materials and equipment provided by Party B do not meet the quality requirements or have different specifications, they shall be prohibited from being used. If it has been used, all losses caused to the project shall be borne by Party B. ..

3. For the materials and equipment that Party A is responsible for purchasing and supplying, see Appendix (IV) of this contract for the list of decorative materials provided by Party A. The decorative materials should be qualified products that meet the design requirements and be supplied to the site on time. Delayed arrival, postponed construction period and delayed punishment. Pay Party B 10% of the total materials provided by Party A as the management fee. After the materials are accepted by Party B, Party B shall be responsible for keeping them, and Party B shall be responsible for compensating the losses caused by improper keeping.

Party A: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Decoration Hydropower Construction Contract 4 Party A: Representative (hereinafter referred to as Party A)

Party B: Representative (hereinafter referred to as Party B)

Party A and Party B have reached an agreement on the subcontracting of water, electricity, fire protection and weak current installation services in Kangtian Nanchuan 18 plot in accordance with the Contract Law of People's Republic of China (PRC), the Building Law of People's Republic of China (PRC) and relevant laws and regulations, and in line with the principles of equality, voluntariness, honesty and trustworthiness. The terms of the labor subcontract are as follows, which shall be abided by both parties.

I. Project Name: XXXX

Two. Project location: XXX

Third, the scope of project contracting

Scope and content of the project: all civil construction areas in the construction drawing, all water, electricity, fire protection and weak current installation works (the engineering quantity will be calculated separately after major changes in the construction drawing).

(1) embed and install indoor water supply pipe network, from one household to one meter on the floor to the indoor water use position;

(2) The indoor and outdoor drainage pipe network is embedded and installed, and connected to the first outdoor inspection well;

(3) Embedded installation of indoor electric lighting lines, cables, bridges, panels and cabinets;

(4) Embedded and installed indoor lighting lamps and switches;

(5) Install all lines and equipment from transformer and generator low-voltage screen to electrical equipment;

(6) Lightning protection and grounding installation;

(7) All fire fighting pipe networks are embedded, and the equipment is installed;

(8) Weak current embedding and equipment installation;

Fourth, the time limit for a project requirements

Party B must complete the project before. Party B shall cooperate with the general contractor to complete all construction tasks before the general contractor's pre-acceptance. After debugging and self-inspection, the completion required by Party A means that the project is completely completed and qualified.

Verb (abbreviation of verb) quality standard

Project quality: according to the quality agreement in the general (sub-) contract, the current national construction and acceptance specifications and quality evaluation standards for construction and installation projects, this project must reach the qualified level of quality evaluation.

Six, the project contracting way:

Contract project, package installation (including lightning protection and grounding, fire protection and weak current), package quality, package civilized construction, package completion debugging and acceptance methods. According to the time limit stipulated by Party A, this project will pass the acceptance of relevant departments and be delivered for use ... by fixing artificial price.

Seven. Contract price

The contract price is RMB: 23.00 yuan per square meter (based on the construction area), which belongs to the general contract. The total price includes labor, machinery, installation auxiliary materials, building installation, debugging, insurance, risk and accidental injury insurance and other expenses.

Eight. Payment and settlement methods

7. 1 Due to the large quantity of work and short construction period, it is planned to pay the labor cost by installments;

7.2 After Party B's capping, Party A shall pay 20% of the corresponding labor costs;

7.3 After Party B completes all services, Party A shall pay 60% of the total services monthly according to the image progress;

7.4 When the project is completed and accepted, Party A shall pay 15% of the total labor cost.

7.5 5% of the total labor cost is used as the project quality deposit, and the warranty period is 2 years. Upon the expiration of the warranty period, if there is no quality problem, Party A shall pay Party B in one lump sum within 15 days after the construction unit and the user unit have no objection.

Nine. design alteration

Both parties shall negotiate amicably for the part of the project payment which is obviously increased due to the construction change, and the delayed construction period shall be postponed accordingly according to the main contract.

X. Supply of materials and equipment

1 All main materials (non-priced materials) used in the hydropower project of this contract shall be purchased and supplied by Party A, and all auxiliary materials (priced materials) shall be borne by Party B. ..

Party B shall provide all tools and instruments for water and electricity installation, and Party A will not provide corresponding tools and instruments.

XI。 Responsibility of both parties

1 Party A's responsibilities

(1) Drawings, descriptions, joint review of drawings, design changes, design notices and design changes provided by Party A on time for water supply and drainage, electrical, fire protection and weak current installation involved in the project.

(2) Party A shall designate the site to be responsible for coordinating and managing the construction site, and handle relevant visas.

(3) Party A shall provide construction water, power connection points and site materials storage places for construction personnel.

(4) Party A shall check the construction quality, progress, safety, material use and storage of Party B from time to time, and check the valid certificates and certificates of Party B's operators. If Party B violates the regulations or fails to meet the required standards, it has the right to require Party B to carry out rectification and maintenance, and the corresponding expenses shall be borne by Party B. ..

(5) Pay Party B's labor costs in time according to the project schedule and contract.

2. Party B's responsibilities

(1) All water, electricity, fire protection and weak current installation works and construction drawings in the civil construction area.

(2) Carry out the construction according to the requirements of design drawings and construction specifications, and reach the national acceptance standard.

(3) Hydropower materials get on and off at the construction site and are transported on site.

(4) Party B's personnel entering the site shall unconditionally obey the management and scheduling of Party A, especially the management and scheduling of site quality, safety, progress and civilized construction.

(5) The raw materials provided by Party A on site are strictly forbidden to be wasted or used in other projects, otherwise Party A has the right to demand compensation from Party B according to the original value.

(6) Before delivery to Party A, the equipment and facilities must be protected, and the finished products must be protected.

(7) Party B shall take good care of itself.

(8) Party B shall put forward the general material plan 7 days in advance, which shall be reviewed and purchased by Party A, and the equipment shall be purchased in two monthly reports in advance.

(9) Person in charge of Party B's site:

Twelve. responsibility for breach of contract

1, Party A's liability for breach of contract

If Party A breaches the contract, it must pay Party B the labor wages for the completed workload on time and in full.

2. Party B's liability for breach of contract

(1) If Party B breaches the contract, Party A has the right to terminate the contract, refuse to pay all the work wages and other expenses of Party B according to the circumstances, and assume full compensation responsibilities for the losses caused to Party A. ..

(2) If Party B's production project personnel are short, the project quality and construction safety cannot be guaranteed, and the construction period is delayed, Party A has the right to terminate the contract and prohibit Party B's operation qualification, and the amount of work completed by Party B will be reduced by 50% according to the single price and paid to Party B as the settlement price.

(3) The agreed time limit for a project shall not be extended for any reason. If the sub-project is not completed within the specified time, Party A will charge Party B a penalty of 65,438+0% of the total price due to the delay in the construction period. Deduct or terminate the contract at the time of settlement, arrange the work of the labor service team separately, or increase the work of the labor service team separately.

Party A: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5 The entrusting party (Party A) decoration hydropower construction contract:

Organizer (Party B):

Party A entrusts Party B to install and construct the residential hydropower project, and both parties voluntarily sign this contract through consultation according to national laws and regulations.

Article 1 Overview of the Project

1. Project: installation of water and electricity for residential buildings.

2. Location: Room 2000, Yijing Garden, Du Dong, xx Avenue, with a building area of 2,000 square meters.

3. Construction and installation contents: wall demolition, drilling and slotting (see Annex 1 Basic Engineering Project), installation of strong and weak wires and switch sockets, installation of hot and cold water pipes and sewers, and installation of lamps and faucets.

4. Total price; The project cost is RMB. The increase or decrease of the project will take effect after the two parties agree on the price, and the installation project and expenses will increase or decrease accordingly.

5. Duration: This project will take days. For this project, Party B shall complete all project installation works on time, in good quality and in good quantity from +2065438.

Article 2 Work of Party A

1. There are no obstacles affecting hydropower installation and construction at the project site.

2. Provide water and electricity interfaces and main materials required by Party B for construction.

3. Provide the house layout (Annex 2), switch socket layout (Annex 3), water appliance layout (Annex 4) and lamps layout (Annex 5) approved by the property management department, and make on-site disclosure to Party B. ..

4. If it is really necessary to dismantle or change the original building structure or equipment and lines, it shall go through the formalities with the property management department and bear the relevant expenses. Assist Party B to handle construction application, approval, registration and other procedures.

5. Supervise and inspect the construction quality and progress of the project, and have the right to require Party B to rectify the unqualified project to meet the design and specification requirements.

6. If you need to use public parts temporarily during construction, you should greet the neighbors and handle the neighborhood relationship.

Article 3 Party B's Work

1. Confirm and sign for Party A's mobilization materials (sign Annex 6), use materials reasonably and ensure their safety.

2. Strictly implement the construction technical specifications, carry out the construction according to the contract specifications, complete the project on time with good quality and quantity, and solve all matters that Party B is responsible for.

3, civilized construction, to prevent accidents caused by construction, such as pipeline blockage, water leakage, short circuit and power failure, damage to goods, etc., once an accident occurs, it must be repaired or compensated as soon as possible.

4, strictly implement the safety operation procedures and fire safety regulations, responsible for the safety of the construction site, fight fire, absolutely guarantee the fire safety of the construction site. Be responsible for the casualties in the process of construction and installation, and bear the losses caused to Party A therefrom.

5. Carry out construction in strict accordance with the bill of quantities and drawings approved by this contract, record the trend of strong and weak current lines, and provide formal drawings of strong and weak current lines.

6. Be responsible for protecting the materials, facilities and building products on site before the project is handed over to Party A upon completion.

Article 4 Quality Requirements

1, engineering construction standard, both parties agree to refer to GB50327-200 1 national standard Code for Construction of Residential Decoration.

2. The varieties, specifications and names of the main materials used in the project shall be recognized by both parties. For details, please refer to Appendix 6 Budget Table of Decoration Engineering Materials.

3. The quality of materials, equipment and products purchased by Party A shall be borne by Party A, the construction quality shall be borne by Party B, and the quality of materials, equipment and products purchased by Party B shall be borne by Party B. ..

4. During the construction, if Party A has special construction projects or special quality requirements, both parties shall confirm and sign a supplementary contract for the increased costs.

5. For other quality requirements and standards, see Appendix 7 "Code for Electrician Construction" and Appendix 8 "Code for Hydraulic Construction".

Article 5 Material supply

1. The materials provided by Party A shall be used in the renovation project stipulated in this contract, and shall not be used for other purposes without Party A's consent. If Party B misappropriates them, it shall compensate Party A at twice the price of the materials.

2. The materials and equipment provided by Party B shall meet the quality requirements. The use of different specifications is prohibited, and all losses caused to the project shall be borne by Party B. ..

3. The materials and equipment that Party A is responsible for purchasing shall be qualified products that meet the design requirements, and shall be supplied on time.

4. Party B shall bear the responsibility of double indemnity due to the improper storage of the materials provided by Party A. ..

Article 6 Payment Terms

1. Party B shall carry out the construction according to the time agreed in this contract, and complete the engineering projects except the installation of lamps and lanterns on time and in quantity. Party A shall pay 60% of the contract price in advance. After the installation and debugging of lamps and lanterns is completed, 30% of the project cost will be paid after acceptance and confirmation by both parties, and the remaining 10% will be the quality guarantee.

2. During the quality guarantee period stipulated in this contract, if there is no quality problem, Party A shall pay it in one lump sum.

Article 7 Construction period

1. If the completion is delayed due to Party B's reasons, it shall be handled according to the liability clause of this contract for breach of contract; If the construction period is delayed due to Party A's reasons, the completion period will be postponed.

2. If the unqualified materials and equipment provided by Party A affect the project quality and construction period, Party A shall bear the cost of rework. In case of quality accidents caused by Party B's construction, the cost of rework shall be borne by Party B, and the construction period shall remain unchanged.

3. In the process of construction, if the construction period is delayed due to the rework of Party B's construction quality problems, it shall be handled according to the liability clause of this contract for breach of contract.

4. In the process of construction, if it is necessary to rework due to Party A's reasons, or the construction period is delayed due to Party A's change of construction contents, it shall be signed and recognized, and Party A shall bear all the construction costs and postpone the construction period.

Article 8 Project acceptance

1. The project acceptance of this contract shall be carried out according to the standards of the project acceptance sheet (see Annex 8). The project acceptance agreed in this contract is divided into two stages. After the completion of all projects except the installation of lamps, Party B shall organize Party A to conduct pre-acceptance. After the project quality is qualified, both parties sign Annex 8 after confirmation, and then go through the project handover and pre-settlement procedures.

2. After the lamps are installed and turned on, both parties shall conduct overall acceptance, sign Annex 8 after passing the test, and then go through the settlement and payment procedures.

3. If Party A cannot come for acceptance within the time specified by Party B, it shall notify in advance.

Party A: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

;