The tap water valve at home is broken and leaks. Who should I call to fix it?

If there is water leakage at the joint between the valve and the pipeline of the household valve, wrap more adhesive tape at the joint (counterclockwise when winding), so that it will be wrapped more and more tightly when connecting the valve. )。

If the industrial valve leaks, if the valve itself does not leak, then add a sealing ring at the joint between the valve and the pipeline. If the valve itself leaks, it will be returned to the manufacturer for repair. If it is inconvenient, the manufacturer will come to repair it.

Extended data:

Precautions for tap water valve:

1. When there is no tap water at home, the pressure is low and the flow is small. Please check whether the valve filter and pre-filter at home are blocked.

2. If the senior owner fails to find the above problems and there are still anomalies, please call for repair, and do not go to the corridor tube well to adjust the pressure reducing valve privately. If the pressure is too high, the hose at home may burst and run away, bringing unnecessary losses and troubles.

Every owner has installed a master valve in his home, which has rusted to death because of long-term non-use. When there is running water or internal maintenance at home, the main valve can't be closed and the pump room needs to be stopped for treatment, which will cause a large area of water cut-off and affect the normal life of residents. Moreover, it takes time to stop the pump and relieve pressure after running water at home, which will cause losses to users and residents downstairs.

Baidu encyclopedia-tap water pressure reducing valve