The charging pile of the battery car in the residential area is tricky. How to use the charging pile of the electric car?

Generally, the charging pile of the battery car uses a 220-volt ordinary socket, but charging the battery car in some communities will limit the power of the charging pile. When the charging voltage is not enough during installation, the charging time of the battery car will be prolonged. In addition, some charging piles have the function of automatic power off after charging 12 hours. Whether the battery is fully charged or not, the power will be cut off immediately after reaching 12 hours. When charging, the charging method should be selected according to the charging power of the electric vehicle. In addition, it is inevitable that the electric vehicle charging pile will be powered off when it detects that the battery is full, instead of 1~2 hours of floating charge, so there will be virtual power. Coupled with the principle of self-discharge of electric vehicles, the battery will fail as soon as it is started. This is a helpless move. Intelligent charging pile means that once the battery is fully charged, it will not deliver current to the battery. Usage of electric vehicle charging pile: If it is code scanning payment, insert electric car charger into the charging pile and directly scan the code. According to the interface, select the socket number, and then there will be power supply selection. When charging, you can choose to stop or choose the preset charging time. Click Start Charging, and the charging time and amount will be displayed in real time when charging. You can remotely control the shutdown, and then send a full or shutdown charging notice to pay. Each charging pile is installed, and it will be charged by coin or credit card. Generally, there are operating instructions near the charging pile. If you have any questions about the length and cost of electric vehicle charging piles, you can complain to the property or ask the manufacturer. It is recommended to discuss with the property when installing the charging pile to connect the wiring of the charging pile to the meter box with lighting equipment, which is open and transparent.