How to check the water meter when stealing water?

There are three simple ways to steal water without disassembling the water meter.

Method 1: It's not easy to handle outside. If you are at home, open the meter box and switch the positive and negative poles of the meter until the person who wants to check the meter comes.

Method 2: Teach you a simple method. After the water meter is filled with water, it won't move unless you turn on the tap very loudly. The water in the water meter will increase the resistance of the water meter pointer, so the pointer rarely turns. An old water meter with a magnet works normally. Schematic diagram of intelligent water meter structure.

Method 3: Usually, the impeller is cut, the gear is taken, the impeller cover is cut, and the meter is dialed. The common practice is to cut the impeller, open the copper cover of the water meter with a pipe wrench, and cut the impeller in half. Don't cut it too much, it is easy to arouse suspicion. It is best to tamper with it in 2-3 times, cut two or three pieces at a time, and cut each piece in half. Remember to stop the water first. Stealing water from the water meter is a very bad interest and practice, which not only hurts the water meter, but also reflects a person's quality from the side.

Who is responsible for the breakdown of the owner's water meter?

Tap water is monopolized by the state, and the property has no right to change. You can appeal directly to the business hall of the water supply company to which your family belongs, and the water supply company will send someone to repair it together. Except for man-made damage, the property is responsible for the damage of the front valve of the water meter.

It is suspected that there is a problem with the water consumption, but it is not necessarily a problem with the water meter. It is recommended to find a property to check whether the water meter rotates. Cost of replacing the water meter: the water company is responsible for replacing it free of charge.