Job Recruitment Website - Property management - What should I do if the toilet seat is not pushed out properly or is stuck?

What should I do if the toilet seat is not pushed out properly or is stuck?

"Come and go in a hurry" is a good habit that everyone should develop to go to the toilet, whether it is a public toilet or their own bathroom. However, there will be some faults in the use of the toilet. The most common problem is that the toilet doesn't run smoothly. Simply put, the toilet is not running smoothly or blocked directly after flushing. Don't panic if the toilet doesn't run smoothly. Find out what the reason is first, and then find the corresponding solution to the toilet flushing problem according to the reason.

Causes and solutions of poor drainage in the bathroom: the bathroom is slightly blocked.

Ordinary toilet paper, sanitary napkins, towel rags and so on cause toilet blockage, which can be directly dredged by using pipe dredger or simple dredging tool.

Causes and solutions of poor toilet water: toilet hard object blockage

When using, you accidentally fall into hard objects such as plastic brushes, bottle caps, soaps and combs. This kind of blockage can be directly dredged by pipeline dredge or simple dredge. In severe cases, the toilet must be disassembled and dredged. This situation can only be completely solved by getting things out.

Causes and solutions of poor water quality in toilets: aging and blockage in toilets.

When the toilet is used for a long time, it is inevitable that there will be scale on the inner wall. In severe cases, it will block the air outlet of the toilet, resulting in slow water intake of the toilet. The solution is to find the vent, scrape off the dirt and let the toilet go smoothly.

Causes and Solutions of Poor Water Quality in Toilet: Wrong Installation in Toilet

Generally, it can be divided into: the bottom outlet is not aligned with the drain, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet to be blocked, and the water level of the toilet tank is not high enough to affect the flushing effect.

Causes and solutions of poor operation of toilets: changing squatting pits into toilets.

Some old houses are built with squat pits, and the bottom of the sewer pipe is a U-shaped waterproof elbow. When the toilet is rebuilt, it is best to change the bottom elbow into a straight bend. If it can't be changed, before installing the toilet, the reverse bend at the bottom must be cleaned, and it is forbidden to let cement or ceramic tile fragments fall into it. This squat toilet should be used with more care.

Small coup to solve the problem of poor water intake in toilet

1. Many times the toilet will pass by itself when it is flushed with water, especially for soluble or dispersible items such as soil and paper. If it is greasy, pour a pot of boiling water to melt. Or buy some caustic soda, boil water to melt it, pour it into the toilet, and it will pass in ten minutes. Or use the right amount of oxalic acid to dredge (you can also use oxalic acid to clean the toilet at ordinary times, just to neutralize urine alkali and make the toilet smooth).

2. Put the hook made of iron wire into the sewer and stir it to make the dirt wound on the iron wire, then pull out the iron wire and drag the dirt out of the sewer. Or find a bamboo stick half an inch wide and put it in the toilet to dredge it.

3.? Fill the toilet with half water and aim at the hole in the sewer with a round mop or a round soft brush. You can also use an old mop. After filling half the water, press the hole hard with a mop a few times. Move quickly, and pressure should be used to get it through. Or go to the market to buy one, then give it a few times, and use it once every half month, so it won't be blocked.

4. Dredge with a beverage bottle, cut off the bottom of the finished Coca-Cola bottle, put it upside down in the toilet, and hold the bottom of the bottle with your hand and pump it up a few times.

When toilet paper falls into the toilet, there will be a slight blockage in the toilet. At this time, it is only necessary to dredge the foreign objects in the toilet. Hard objects falling into the toilet can cause serious blockage. At this time, the hard foreign objects in the toilet must be cleaned before entering the water. The toilet is installed incorrectly, and squatting to change the toilet will cause the toilet to run poorly. In both cases, poor toilet water needs professional inspection and maintenance. When using the toilet, be sure to remember that you can't throw foreign objects into the toilet casually to avoid blocking the toilet.