Job Recruitment Website - Property management - Summary of personal work of property engineering department for half a year
Summary of personal work of property engineering department for half a year
Inadvertently, the work has come to an end. I believe you have gained a lot during this time. Should I write a work summary record? How should I write a work summary? The following is my personal summary of the work of the property engineering department for half a year (5 general remarks), welcome to share.
Personal work summary of property engineering department for half a year 1 1. Summary of construction quality inspection
According to the problems existing in the inspection, I have carried out the relevant technical disclosure for rectification, and distributed the technical disclosure to the foreman, and asked the main management personnel of each project to control the project quality according to the relevant technical disclosure data. In the process of implementation, because the management system is not perfect, the leaders do not pay attention to the quality of the project, and the implementation is not in place at all levels, so there are no original cases in the implementation according to the relevant technical specifications, and the reasons for not implementing them are analyzed.
First, in view of the quality and safety problems existing in the current construction projects, make further analysis. Engineering quality is the life of an enterprise, which should aim at quality first and safety first. First of all, the company leaders do not attach importance to the quality of the project. The company has not set clear quality management objectives and safety management objectives for each project, no clear and feasible quality and safety control measures, and no unified control objectives. Therefore, all kinds of sub-projects have not been effectively controlled in the construction process.
B, the biggest defect in quality management of each project is that there is no targeted operation technical disclosure control book. Senior management personnel are not clear about the quality management objectives and safety management of each sub-project, let alone effective technical documents for guidance and control, which is quite volatile and arbitrary. According to the inspection results, it can reflect the previous implementation process. In the construction of subdivisional work, the operation is basically directed according to the randomness of each foreman, regardless of the technical level, and there is no effective control in accordance with the requirements of relevant specifications.
C, technical disclosure is one of the conditions for effective control of engineering quality. Therefore, disclosure should be made before each subproject is implemented. The disclosure of operation technology, the specific refinement of construction scheme and the more specific technical implementation scheme are the specific guiding documents for process construction. First of all, the project manager should attach great importance to technical disclosure, and clarify the contents of disclosure, including construction methods, quality requirements and acceptance standards, problems that should be paid attention to in construction, possible unexpected problems and emergency measures. Key parts or subdivisional work with great technical difficulty and complicated construction, as well as subdivisional work without technical disclosure, shall not be formally implemented.
Two. Overview of production and quality management
1, the construction project is a production unit with great fluidity and fluctuation. It is not as standardized as the production line of general industrial products. Has a fixed production line, standardized production technology and perfect testing technology, complete sets of production equipment and stable production environment. Therefore, the project quality is prone to fluctuations, and the fluctuations are still relatively large. At the same time, there are many factors that affect the engineering quality. Any one of them will fluctuate. Such as the wrong use of material specifications and varieties, improper construction methods, non-compliance with regulations, mechanical equipment failure, design errors, production system construction environment, etc., will cause engineering quality accidents. One of the main factors is human factors. According to the project under construction in our company, most of the quality problems and potential safety hazards are caused by human factors, which mainly include five factors, namely, human factors, material factors, mechanical factors, construction methods and construction environment.
2. Human factors: people are the main body of production and business activities, and also the decision makers, managers, operators and the whole process of engineering construction, such as project planning, decision-making, survey, design and construction. The quality of personnel, that is, people's cultural level, technical level, decision-making ability, management ability, operation ability, control ability, physical quality and professional ethics, will directly affect the construction quality, so the personnel factor is an important factor affecting the project quality. Therefore, to strengthen the management quality of managers and improve the quality and safety of management, we must first start from the leadership.
3, engineering materials, all kinds of building materials, components, semi-finished products, etc. They are the foundation of engineering quality. Whether the selection of engineering materials is reasonable, whether the products are qualified, whether the materials have been tested, whether they are properly kept and used, etc. It will directly affect the quality of the project and the stiffness, strength, look and feel, function and safety of the structure. At present, the basement of the whole roof leveling layer on the second floor of Shenzhen project is not firm, and the surface is peeling and sanding, which can't meet the normal standard requirements, which makes the next construction very difficult, can't guarantee the project quality and increase the project cost, because the wrong materials are used first. 4. Construction method and construction method refer to process method, operation method and construction scheme. In the process of construction, whether the construction scheme is reasonable, whether the construction technology is advanced and whether the construction operation is correct will have a great impact on the engineering quality. Different construction methods produce different quality and project cost. Different construction methods have different costs and different quality.
5, machinery and equipment, all kinds of machinery and equipment used in the construction, including large vertical and horizontal transportation equipment, they are the main tools of construction production, the type of construction machinery, whether the operation is convenient and safe, etc. , will directly affect the project quality, affect the project schedule and project cost.
6. Environmental conditions include engineering technical environment, such as engineering geology, hydrometeorology, etc. The working environment and surrounding environmental conditions of this project will directly affect the quality of the project, but the construction site environment is mainly human factors.
7. At present, the main factors existing in the inspection are the above five factors, and the main one is the personnel factor. The factors that affect the project quality are mainly divided into: construction decision, construction scheme, construction technology, construction scheme, construction method, construction technology, construction arrangement and construction inspection. The above eight items are one of the reasons that directly affect the project quality. Therefore, it is necessary to strengthen the quality of managers, strengthen the improvement of professional knowledge, and improve the engineering quality with their own management level.
Summary of Personal Work in the Property Engineering Department for Half a Year 2 Looking back on the work in the first half of the year, there are fruitful joys, difficulties in tackling key problems with colleagues, and melancholy when encountering difficulties and setbacks. Time flies, before you know it, the first half of 20 1x will be over. The important work in the first half of the year is summarized as follows:
routine work
The main contents of the work are daily maintenance, infrastructure and equipment maintenance. In the first half of the year, the task given by the leaders was to maintain and repair the public facilities of xx and xx buildings. Every time you check, you should actively and seriously check and repair, and solve the problem in time. In the past six months, brick skirting, light bulbs, lamp holders, panels, door closers and exit lights have been replaced, and the power distribution room has been inspected and cleaned many times. Over the past six months, I have kept public facilities and equipment in good condition, and received hundreds of work orders from the customer service department to go to the owner's home for maintenance services. Service satisfaction reached more than 99%, and no effective complaints were received from the owners. In my usual work, I have encountered many times that the main sewer pipe in the building is blocked and the reclaimed water pipe runs out. I'm not afraid of being dirty or tired. My colleagues and I actively worked overtime to deal with unexpected problems and restore water supply in time, which strongly supported the collection of property fees by the customer service department. Grasping time, putting customers first, and being careful and thoughtful are all my consistent work styles and attitudes. Details determine success or failure, and nothing can really win the praise of customers.
1. Really pay attention to every customer's needs and demands, and strive to achieve the purpose of local solution. Even if it fails, it is necessary to explain the reasons and reasons to gain the understanding of customers;
2. Strengthen work exercise and be familiar with service processes and details. Learn by heart, pay attention to working methods, be flexible, do not shirk and perfunctory, exchange sincere heart for understanding, and enrich your work goals and tasks with satisfactory service.
Ask yourself:
With the professional attitude of "working for yourself", I love my work and work creatively. During this period of work, I also have a deep understanding of myself. I still have many shortcomings, and my work efficiency needs to be improved; Some work is not done carefully enough, and work coordination is not in place; Need to strengthen the provision of data to leaders; At the same time, it is necessary to strengthen communication with company leaders and department employees.
In the future work, we should constantly innovate, communicate with other employees in time, be strict with ourselves in home maintenance, and set an example for other employees. In the second half of the year, I will continue to work hard, report my thoughts and feelings at work to the leaders, and correct and make up for my shortcomings and defects in time. I will do my best to make customers live in our property service community more comfortable and secure, and let owners enjoy the first-class service of our property. Live up to the expectations and trust of the company and leaders.
Personal Work Summary of Property Engineering Department for Half a Year 3 xx Business Building Engineering Department will summarize the work in the first half of 20xx as follows:
The first is energy-saving transformation.
1, major in air conditioning
Check all the cut-off doors of the cooling tower, reform the water distributor of the cooling tower, install butterfly valves to adjust the water quantity, and clean up the leaking shower of the water distributor to ensure that the cooling water dissipates more fully and distributes water more evenly during refrigeration. The chief engineer's office took someone to clean the condenser of the refrigerator in our building with chemicals. Because the cooling water gate of the refrigerator is not tight enough to be cleaned, only the refrigerator was cleaned this time. In addition, 14 barrels of system cleaning agent and 8 barrels of system prefilming agent purchased by the general office have been delivered. Later, the cooling water system was cleaned with chemicals, and 70 tons of sewage was discharged. In the next few days, the cooling water system was prefilmed with chemicals and discharged.
2. Electrical major
Standardize and adjust the lighting of the passenger elevator hall on the first floor. Before adjustment: the downlights and spotlights in the passenger elevator hall on the first floor are unevenly distributed, chaotic and unsightly. The replacement of spotlights is troublesome, which has a destructive negative impact on the decoration of gypsum board ceiling and wastes energy. After consultation with the project leader, the adjustment was made according to the brightness. After adjustment, the 75w 16 spotlight is removed and the 75w 13w 16 energy-saving downlight is used, which is evenly distributed and beautiful. It improves lighting, saves energy, avoids the damage of ceiling decoration, and enhances the coordination with lobby lighting.
Complete the transformation of 50w spotlight on the 5th-17th floor into 13w energy-saving downlight, saving energy. In February, the lighting renovation was carried out for the passenger elevator hall of this building: the original 50w spotlight was transformed into 9w energy-saving downlight, *** 132. According to statistics, monthly energy saving is XXXKW, and annual energy saving is XXXKW.
Renovation of lobby curtain wall lighting (from original 70w to 13w energy-saving downlight), the electricity consumption before renovation is XXXKW/ month, and the annual electricity consumption after renovation is/year, with annual energy saving of * * * xxxxkw/rh. Calculated by the average price of RMB/kWh, the annual cost saving is RMB xxx. In May, the minimum lighting of the building (5- 18 floors) was adjusted and planned to make the lighting more beautiful and standardized. In order to realize the unified lighting of the building, the small downlight circuit of the passenger elevator hall (5- 18 floor) was reformed, and all of them entered the building control system to realize unified management. * * * Retrofit 10 floor, 120 lamp. Lobby lighting, building floodlight lighting and b2b3 garage lighting can be divided into two states: daytime lighting and night lighting, which have made practical work for humanized management and energy saving of the company. * * * 13 is equipped with a time control switch.
Second, energy control.
1, major in air conditioning
32 electric water heaters are out of service, 2 each. 4kw, the original water heater runs 24 hours a day, 30 days this month. Due to the dosing and cleaning of the refrigerator cooler this year, the cooling effect of the refrigeration unit has been greatly improved. Last June, two large units were operated at the same time. This year, two refrigerators, one large and one small, have been used for operation. A 1 1kw cooling fan can save electricity every day 1 set, a 45kw water pump and refrigerator can save electricity every hour, and small units can run for 22 days every day. So this month * * * saved xxxx degrees, and the electricity bill saved xxxx yuan.
2. Electrical major
The lighting and other equipment and facilities of the building were energy-saving transformed (see energy-saving transformation for details). Try to turn off the water heater in the bathroom in the building, which has a good energy saving effect. 32 electric water heaters, each xkw, stopped using, the original water heater runs 24 hours a day, 30 days in June, * * * saves electricity xxxxkw.
In the first half of 20xx, the engineering department strictly controlled the water and electricity consumption in the building, and carried out energy-saving transformation on some facilities, reaching the total amount of water and electricity control required by various indicators issued by the general office.
Third, the adjustment in the second half of the year.
In order to meet the needs of energy conservation and emission reduction of the head office, on the premise of ensuring customers' refrigeration demand, according to the spirit of the Notice on Special Supervision of Indoor Temperature Control and Management in Public Buildings in Summer, the opening time and quantity of air conditioners in buildings in the second half of the year are adjusted. Air conditioners are required to pay close attention to the changes of outdoor temperature and humidity, adjust the switching time in time, raise the ambient temperature and reduce the heat load in some public areas, so as to achieve the purpose of energy saving. B2, b3 Hot maintenance of fire hydrants and pipeline electric disks should be completed before freezing to ensure the normal use of fire hydrants.
Personal Work Summary of Property Engineering Department for Half a Year 4 In the first half of 20xx, under the correct leadership of the company's leaders, the engineering department worked hard to create a good working environment with a rigorous and serious working attitude, and at the same time accelerated the in-depth promotion of various projects under construction, and strived to launch new projects. With the active cooperation and joint efforts of all members, in the first half of the year, our department successfully carried out the construction and renovation of three projects, including engineering, engineering and office building decoration, and won the bid for three blocks of housing construction, housing construction, municipal infrastructure and supporting construction. The handover of overseas projects has been completed, the project has officially started, and the project is in the quality assurance stage. The work in the first half of this year is summarized as follows:
I. Main Work Progress in the First Half of 20xx
Reconstruction and expansion project: the reconstruction and expansion project has been basically completed. The service area is put into use, which indicates that the main construction stage of the whole reconstruction project is basically over. According to the preliminary calculation, the amount of the project completed by * * * is about X billion yuan. In which: in the first half of 20xx, the completed project amount is about xxx million yuan, xxx square meters. The amount of work completed in the service area is about xxx million yuan, accounting for xxxx square meters. For the completed project, our department actively cooperates with the project settlement audit, and reports the completed project settlement to the owner. Up to now, the project audit within the scope of the contract has been basically completed, and the audit result is about more than RMB xxx.
The first half of xxxx is the most critical period of the project, with an output value of more than 10,000 yuan. With the joint efforts of company leaders, on-site technical team and domestic management team, the project manager and construction personnel overcame various difficulties on site in the face of tight time and heavy tasks, so that the project passed the internal acceptance smoothly and was assessed as qualified. The project has entered the implementation preparation stage. From the initial technical team managers arrived at the scene, the project preparation began, 25 workers arrived at the scene, the first batch of materials arrived in Hong Kong, and the project officially started.
Housing construction project: I submitted the prequalification documents for four sections of * * *, and all four sections passed the prequalification. After entering the bidding stage, according to the stipulation that only one bid can be won for the same project in the bidding documents, our department ensured that the two bid sections with the largest construction scale won the bid with a rigorous and serious attitude in the bidding work in April, namely the third bid section and the third bid section.
The safety work of our department in the first half of the year mainly includes: implementing the responsibility for safety production and signing the responsibility book for safety production; Actively carry out safety production month activities; Seriously carry out safety education and training; Convey the spirit of superior documents and complete the task in time; Carry out safety inspection and carefully organize hidden dangers investigation; Complete the extension of safety production license;
In the first half of 20xx, according to the company's purpose and under the correct leadership of the leaders, our department was responsible for handling the formalities of branches and branches. At present, the branch procedures have been completed, and the branch procedures are also being actively handled. With the cooperation of other departments, our department organized and completed the external supervision and audit of the company by the certification company, which passed smoothly and achieved "zero" nonconformity, which was well received by experts.
Second, the existing problems
In engineering construction, due to the actual situation of our company, the details and standardization of engineering construction and management need to be improved. Due to the large number of start-up projects and the shortage of project managers, the overall development plan of the department is difficult to achieve. Because the company's safety production situation has been relatively stable, individual projects have not paid enough attention to safety management, and there are mainly the following shortcomings: First, the change report of safety management personnel is not timely; Second, the assigned security tasks cannot be completed in time; Third, the professional knowledge of the safety management team needs to be further strengthened.
Third, the development plan for the second half of the year
Continue to pay attention to quality and safety, ensure the smooth start of housing construction projects, and make due contributions to the building of the company's brand. We will continue to do a good job in the standardization of safety production, and gradually implement the standardization management of safety production in construction projects in the second half of the year. Do a good job in year-end safety assessment. Do a good job in training the safety management personnel of each unit. Improve the security system.
The summary of personal work in the property engineering department for five years flies, and half of xx years have passed in an instant. Looking back on the work experience in the first half of the year, I can't help feeling a lot, which can be described as an extraordinary test and tempering.
In July, it happened to be the first anniversary of my work in Mao Huan. After a whole year's work and exercise, I feel very proud and have completely lost my girlish feeling as a student. Now I am more mature, more responsible and more aware that it is not easy to do a good job.
In the first half of this year, every colleague in our engineering department only wore the word "acceptance" on his head. As you can imagine, the focus of our work in this whole half year is the acceptance of last year's "1452" construction project. According to the arrangement of the leader of the engineering department, I was assigned to Shaoxing project team, so my main task was to assist Tian, the project manager of Shaoxing, to complete the acceptance of Shaoxing online monitoring project. Perhaps I have more experience in the acceptance of online flue gas monitoring projects, so I have been assisting Bin Sun in the acceptance of flue gas projects in Hangzhou at the beginning. Despite the heavy work pressure and intensity, I finally completed the acceptance tasks of Yuhang, Xiaoshan, Fuyang and Jiande in a professional and responsible manner, and actively cooperated with the monitoring station. During the period, he also assisted Jinhua to accept the smoke for two weeks. Of course, I also tried my best to assist Wang Leyan in the acceptance work. /kloc-returned to the project team in Shaoxing from May 0/2. This time is the most urgent time for Shaoxing's acceptance. Everyone felt a lot of pressure, but we didn't back down. Everyone thinks that another 20 days will definitely complete the acceptance task. As a member of Shaoxing project team, I know that we should work harder and share the work pressure of the project manager. During my stay in Shaoxing, I successfully completed the acceptance task with my colleagues in the operation and maintenance department, and participated in the transformation and acceptance of a number of online flue gas monitoring projects. During this period, Tian also arranged for me to complete the acceptance comparison of Shangyu 12 enterprise water quality online monitoring project. I overcame all kinds of difficulties and completed the acceptance comparison in a short time.
This half year can be described as high-intensity work, and it is a rare exercise for young people who have just entered the workplace. I am also very satisfied with my performance. "Pressure is motivation" does make sense.
Win without arrogance, lose with grace. The tasks in the second half of the year are still relatively heavy, such as the follow-up rectification of the 1452 project, the recovery of the final payment, new projects and so on. And the next work will definitely be more difficult. I know my duty is to assist and cooperate with the project manager, work harder and be more passionate. I believe I can do my work better and make greater contributions to the company.
;
- Related articles
- Will Peizhuang New Village in Yangzhou be demolished?
- What are the facilities around Nanxin Village (Huaihai West Road) in Xuzhou?
- How about the new ideal garden? OK or not? Is it worth buying?
- Is it easy to park in Luoyang Milan Impression Community?
- How about Huangdai Zhongxiang Life Plaza? OK or not? Is it worth buying?
- How to arrange and produce health in shopping mall meetings
- Where is Longsheng New Town in Liangjiang New Area?
- Brief introduction of Dahanda Property Management Co., Ltd.
- Xi An Zhong Jian Max Hotel
- Summary of hotel front desk staff's work