Maintenance responsibilities

In study, work and life, there are more and more occasions that need job responsibilities. Job responsibilities mainly emphasize the responsibilities that should be done within the scope of work. What job responsibilities have you been exposed to? The following are the maintenance responsibilities I collected for you. Welcome to learn from them, I hope it will help you.

Maintenance job responsibilities 1 1. Qualifications

1) 1, with a college degree or above.

2) Have safety work regulations and professional knowledge of power plants.

3) Engaged in electrical equipment maintenance for more than two years.

4) Have electrician operation certificate.

5) Be familiar with the maintenance, maintenance and experimental projects of professional equipment.

6) Have the spirit of love and dedication, seeking truth and being pragmatic, and technological innovation.

7) Be able to take the overall situation into consideration, guide and assist all employees to successfully complete various tasks.

Second, the responsibility and authority

1, responsible for observing the rules and regulations of the power plant on production and safety;

2, must abide by the operating rules of this position, to ensure the safe operation of the equipment;

3. Have the responsibility to complete the production tasks and related work of this position;

4. Have the responsibility to safeguard the interests of the company and the power plant;

5. Have the responsibility of actively learning business knowledge and constantly improving business skills;

6. According to the post requirements, have the right to manage the equipment, tools and regional affairs under their jurisdiction;

7. Have the right to refuse to carry out illegal acts;

8. Have the right to put forward suggestions to improve work and improve work efficiency;

9. Have the right to maintain the safety of public property and stop all illegal acts;

Three. Work content and requirements

1, and carry out maintenance work under the guidance of the factory director.

2, electrical equipment maintenance, maintenance work.

3, generator, feed water pump, circulating pump, condensate pump and other high and low voltage motor maintenance, maintenance, maintenance and testing work.

4. Daily maintenance of primary and secondary circuits and lighting of electrical equipment.

5, received the list of equipment defects, should immediately deal with, don't buck passing.

6. Strictly carry out maintenance procedures, and eliminate maintenance and equipment to achieve "three noes" (no oil stains, no water and no ash), "three noes" (removed parts should be placed neatly, maintenance tools should be placed neatly, materials and spare parts should be placed neatly) and "three noes" (don't pull wires, pipes and sundries randomly). Clean the site before going to work every day, so as to clean the site after work.

7, seriously study maintenance technology, improve their theoretical level and practical ability.

8, complete other work assigned by the leadership.

Maintenance job responsibilities 2 1. Consciously abide by the rules and regulations of the center, obey the distribution, strictly abide by the labor discipline, and shall not leave the post without authorization, and use the school equipment without permission during working hours.

You have to pass a rigorous exam before you can get on the job. Working without a license is forbidden. Actively participate in maintenance business learning and constantly improve their maintenance skills.

3. Take care of the equipment and facilities and the equipped maintenance tools.

4. Strictly abide by the operation rules of plumbers, pay attention to personal safety, and refuse to operate illegally. During maintenance, follow the principle of safety first and quality assurance.

(1) Sewage discharge: Make sure that the water is not blocked, the road surface is not flooded, and the manhole and septic tank are unblocked.

(2) Woodworking: Keep doors and windows in good condition and teach desks and chairs to work normally.

(3) Plumber: Ensure that lamps and lanterns can be used normally, ceiling fans, switches, sockets and water supply are normal.

5. Obey the unified arrangement of the management personnel, and arrive at the maintenance site 20 minutes away and 10- 15 minutes after receiving the dispatching order to ensure timely maintenance.

6. In case of emergency, you should take part in the emergency repair in time and be on call to ensure the normal teaching.

7. Adhere to the daily patrol inspection, do regular inspection and maintenance, handle problems in time when found, and ensure that the facilities and equipment are in good condition.

8. After each semester's holiday, check the desks and chairs, lamps and other equipment in time, and repair any defects in time to ensure the normal teaching in the new semester.

9. Make maintenance records of all equipment in the teaching building, and cooperate with the administrator to arrange daily inspection and maintenance to ensure the quality of work.

10. Strictly implement the picking system, pay attention to the maintenance of all kinds of equipment and tools, be thrifty, repair the old and make use of the waste. In the process of maintenance, materials shall not be wasted at will.

1 1. Strictly implement the maintenance work registration system. Operate in strict accordance with technical regulations and process requirements to ensure safety and quality.

12. It is forbidden to work after drinking, and it is forbidden to play with alcohol. Offenders will be handed over to the relevant departments at their own risk.

13. Actively complete other tasks arranged by the leaders.

Maintenance job responsibilities 3 1. Responsibilities: Responsible for the system and hardware maintenance of computers such as classrooms, offices, multi-function halls, printing rooms and computer rooms.

2. Accurately answer the telephone activities and related technical knowledge of computer fault hotlines in various offices, and instruct teachers to learn some daily maintenance as much as possible, such as anti-virus methods. .

3. In addition to attending class, after receiving the call or text message of maintenance request, implement the maintenance matters as soon as possible, fill in and bring back the maintenance form signed by the reporting teacher.

4. Check the computer system regularly at the beginning and end of each semester. When necessary, upgrade anti-virus software to carry out comprehensive anti-virus, ensure the normal operation of teaching computers and office computers, and ensure that the commonly used software needed for education and teaching management is installed in place.

5. At the end of the semester, summarize the statistical data of the "Registration Form for the Use of Modern Educational Equipment" in classrooms and multi-function halls and submit it to the General Affairs Office.

6. Find the phenomenon of illegal installation of programs in classroom computers, careless tampering with malicious codes and bad information, delete them in time and register violations or accidents.

7. Cooperate with the General Affairs Office and the Information Center to do a good job in information technology.

Maintenance responsibilities 4. Love my job, be serious and responsible for my work, be meticulous, study technology assiduously, strive for perfection, and establish the idea of serving customers wholeheartedly.

Responsible for the normal operation and maintenance of all elevators in the company.

Responsible for the maintenance and troubleshooting of all elevators and ancillary equipment in the company to ensure the normal operation of elevators.

Responsible for the inspection and maintenance of elevator lighting and internal and external call instructions.

Responsible for cleaning the elevator car (not included in the box), shaft and shaft bottom, rectifiers, reactors and control cabinets of various elevators.

Be responsible for opening and closing elevators according to regulations to improve transportation efficiency.

Establish elevator files, conduct regular inspections and tests, and handle problems in time when they are found, so as to "nip in the bud".

Handle the faults in the elevator operation in time to ensure the normal operation of the elevator. In case of fire, be responsible for closing the elevator.

In case of elevator failure, first explain to the passengers through the intercom, then report to the supervisor, and remind the fire center to monitor the situation of trapped passengers and take rescue measures quickly to ensure the absolute safety of passengers.

Stick to your post, stand idly by in the studio of this department as if nothing had happened, and strictly abide by labor discipline and employee code. Don't leave your post without authorization, and don't do anything unrelated to your post at work.

Maintenance job responsibilities 5 1. Strictly abide by national laws and regulations and company rules and regulations, and implement various management service systems and processes such as the administrative management code of service center/management office.

Second, assist the department head to complete the management service of the department.

Third, warmly receive and accept the owners' visits, inquiries, commissions and complaints, and handle the decoration application and decoration acceptance procedures for the owners in accordance with the working procedures.

Fourth, do a good job in the maintenance, maintenance and overhaul of public facilities in the community. Actively carry out community paid maintenance services.

5. Handle all kinds of maintenance applications of the owner/tenant in time, and contact or coordinate the construction unit for maintenance in time and effectively during the warranty period.

Six, strengthen the patrol inspection work in the community, handle the problems in time or report to the maintenance supervisor, service center/management office director. Strictly implement various safety operation procedures to ensure the safety of equipment and personnel.

Seven, to assist in the community owners tap water meter copy work.

Eight, management service records and accounting, timely and detailed, and properly kept.

Nine, residential decoration households should carefully check every day and make detailed records. If illegal operations are found, they should be stopped or issued a rectification notice in time, requiring rectification within a time limit.

Ten, seriously study the knowledge of property management, familiar with and master the basic situation of residential building structure, public facilities performance, pipe network and residents, actively participate in the business training of the company, service center/management office, and constantly improve the professional quality and ability to deal with problems.

Eleven, timely completion of other tasks assigned by the leadership.

Maintenance Job Responsibilities 6[ Management Level]

Direct supervisor: manager of electric power operation and maintenance department

[Job responsibilities]

1, carry out the work instructions of the superior manager and report the work.

2, lead the team members in strict accordance with the high and low voltage electricity management system and safety operation norms to do a good job in daily work.

3. Organize employees to do a good job in the maintenance management and technical innovation of electrical equipment, and cooperate with relevant departments to do a good job in the completion acceptance of newly installed electrical equipment.

4. Participate in the analysis meeting of electrical faults and accidents, and put forward rectification opinions and preventive measures.

5. Cooperate with relevant departments to do a good job in training operators in business technology and safe operation, and improve their technical level.

6. Be responsible for the supporting work of power supply in power distribution room and high and low voltage power distribution room, manage planned electricity consumption, safe electricity consumption and saving points, master and analyze daily electricity consumption, and record electricity consumption.

7, lead and urge employees to do a good job in the inspection and maintenance of high and low voltage distribution room on duty, and do a good job of regular cleaning.

8, responsible for the preparation of facilities and equipment electrical maintenance plan.

9, responsible for the preparation of electrical spare parts, spare parts procurement plan.

10, responsible for staff's work arrangement, attendance and assessment, and do a good job in civilized team building.

Maintenance job responsibilities 7 job responsibilities

L, master the basic working principle of frequency converter;

2. Understand the basic knowledge of factory power supply and the basic principle of inverter power supply;

3. Familiar with the basic characteristics of IGBT, electrolytic capacitor, absorption capacitor and reactor;

4. Familiar with the use of test tools: multimeter, oscilloscope, signal generator and electronic components;

5. On-site service, maintenance and debugging.

qualified

1, college degree or above, major in electrical electronics, automation and related fields;

2. Experience in inverter after-sales work is preferred, and excellent fresh graduates are also acceptable;

3. Familiar with the structure, principle, fault handling and industrial application of frequency converter;

4, can accept business trips to the customer site for maintenance;

5. Enthusiasm for work, cheerful personality, good health and team spirit.

Maintenance job responsibilities 8 1. Responsible for the maintenance of hotel rooms, corridors, tube wells and workshop facilities and equipment.

2. Be warm and considerate to the guest service, pay attention to gfd, be polite to the guests, handle the faults promptly and quickly, and give feedback if they cannot be handled in time, so that the guest room can do the aftermath well. Let the department arrange and organize maintenance.

3. When maintaining the guest room, it should be led into the guest room by the waiter. For rooms where guests are not present,

The personnel on duty should be present during maintenance and leave in time after maintenance.

4. When the guest room is overhauled, take care of all the furnishings and articles in the guest room, and don't tamper with the guest's things. Clean up the site in time after completion, restore the moved items, and report to the waiter for signature and confirmation in time.

5. The VIP room should be overhauled before check-in, checked when check-in, and the repair items should be quickly present, carefully checked, repaired in time, apologized to the guests, and left after confirmation.

6, non-work needs, are not allowed to stay in the guest room, corridor, workshop; Don't chat with the waiter, so as not to affect others' work.

7. Obey the arrangement of the superior leader, make daily maintenance records, and submit them to the engineer on duty for review after work.

Maintenance job responsibilities 9 job requirements:

1, responsible for the inspection and maintenance of hotel interior decoration and civil works.

2. Complete the daily maintenance and temporary maintenance tasks arranged by the department.

3. Provide the status quo of hotel facilities and public areas, and put forward remedial suggestions.

4. Have certain repair and maintenance skills for public facilities and equipment.

5. Require junior high school education or above, under 50 years old, strong sense of responsibility, obey the arrangement of leaders, complete the tasks assigned by superiors, have a certain understanding of the professional knowledge of carpenters, oilers and masons, and have strong hands-on ability.

6. Experience in maintenance of residential quarters, office buildings and hotels is preferred, and those with professional qualification certificates such as carpentry and painter are preferred.

7. Can accept shift system.

Maintenance post responsibilities 10 1, establish the idea of serving Party A wholeheartedly, provide warm service, maintain and operate in a civilized manner, and work with certificates;

2. Abide by the company's rules and regulations and obey the work arrangement of the project department; After receiving the maintenance service contact form, you should come to the door in time, ask for urgent repair, and arrive at the fastest speed for maintenance;

3. Be familiar with the knowledge of high and low voltage electricity consumption and weak current electricity consumption, fully grasp the functions and related technical parameters and operating procedures of all electrical equipment on campus, and strictly implement the maintenance procedures of electrical equipment to ensure that the electrical equipment is in good condition and normal operation; Fully grasp the water, electricity and other supporting facilities in the campus and master the maintenance technology skillfully;

4, after receiving maintenance services, timely home maintenance; After the maintenance work is completed, feedback the maintenance results to the project department in time. Belonging to the paid service project, the maintenance fee shall be charged with a receipt, and shall not be charged without a license, and shall be signed and approved by the residents;

5. After receiving the maintenance task, it is necessary to accurately judge the fault, ensure the maintenance quality, improve the work efficiency, try not to affect the work, study and life of teachers and students, provide convenience for them, pay attention to the cooperation between different types of work, consciously do a good job in sorting out the maintenance site, and keep and maintain the cleanliness of the site;

6, regularly check the water, electricity, doors, windows and other public facilities in good condition, found that there is damage should find out the responsibility, and promptly notify the relevant class teacher and the competent department.

6. Be familiar with the functions and working principles of the maintenance instruments and tools used in this position, memorize the specifications, models and uses of all spare parts and materials, and make relevant records as required;

7, completes the maintenance tools and accessories recipients procedures, and do the necessary maintenance work;

8, study hard technology, constantly improve the professional and technical level, fully grasp the maintenance skills of campus facilities and equipment;

9, carefully record the maintenance situation, specify the work content and completion in detail, and at the end of each month to the head of the department, as a basis for assessment;

10, complete other work assigned by the leaders.

Maintenance post responsibilities 1 1 1. According to the work flow and operation instruction of the factory equipment, complete the daily inspection of the workshop equipment and record the data to ensure the normal operation of the production equipment.

2. Be responsible for the equipment failure in the workshop area, understand the reasons in time, arrive at the scene in time to solve it, ensure the maintenance quality and progress, and resume production and operation as soon as possible.

3. Basic maintenance of factory public facilities, such as lighting, door locks, etc. Patrol the operation of all public facilities to ensure the normal and safe use of public equipment in the factory.

4. Participate in the renovation of innovative projects related to factory equipment, and complete the renovation projects in time according to the renovation plan.

5. According to the EHS requirements of the company, ensure the safe production of the equipment, find the potential safety hazards in time, and deal with them immediately to ensure the safety of the equipment in the factory.

6. Other work arranged by superior leaders.

Maintenance post responsibilities 12 Strictly abide by the safety management system, stick to the post and be familiar with the equipment structure and principle.

If the equipment fails, it should be repaired in time to ensure the normal operation of the equipment, and the repair task should not be shirked without reason. For equipment that can't be repaired, it is necessary to report to the competent leader in time to help solve it.

When maintaining instruments and equipment, safety protection must be done, and mechanical repair shall not be carried out with electricity, and the operator must be informed when debugging after repair.

Engaged in electrician, electric welding, gas cutting and other operations in strict accordance with relevant regulations to ensure work safety.

Each shift should check whether there is oil leakage, oil leakage, air leakage and electric leakage in each system, whether there is overheating of electrical appliances and motors, whether there is abnormal sound, whether the instrument indication is normal, etc. The main inspection contents include:

Mixing system: check the abrasion of mixing blades and lining plates, check whether the discharge door moves freely, make vibration and noise during mixing, and deal with abnormal phenomena as soon as possible.

Measurement part: Check whether the cement scale, water scale, additive scale and sand scale are normal. It is forbidden to have foreign objects in the hopper that affect the measurement accuracy. If there is any fault, eliminate it in time.

Transmission system: whether the tension of motor and V-belt and the gap between gearbox and connecting plate are normal.

Pneumatic system: whether the actions of cylinders, electric touch valves and pneumatic flap valves of all components are accurate and effective, whether the separated water can be effectively discharged from the oil-water separator assembly, whether the lubrication in the injector is sufficient, and whether there is air leakage or air leakage in the air path.

Lubrication system: mixer shaft head, gate double-tile bracket, oil atomizing oil tank and oil reservoir, belt feeder transmission box.

Do a good job in cleaning, lubricating, fixing, adjusting and maintaining mechanical equipment, and be responsible for circuit inspection and electrical appliance replacement in the station area. It is forbidden to run without oil.

In case of violation, it will be fined 100 yuan.

Xx commodity concrete co., ltd

Maintenance post responsibilities 13 1. Responsible for the maintenance of various facilities and equipment, and make relevant records carefully;

2. Regularly patrol the property management area and find that the public facilities are damaged, hidden dangers or other abnormal conditions, and should be maintained in time to ensure the normal operation of public facilities and equipment;

3. Responsible for handling emergencies and taking emergency measures to ensure the normal operation of facilities and equipment;

4. Provide maintenance service for the owner, receive customer service, and rush to the scene to troubleshoot in time;

5. Complete other tasks assigned by the leaders.

Maintenance post responsibilities 14 1. Be responsible for the safety, maintenance, rational design, installation and debugging of the company's power facilities, and use them according to the operating procedures.

Second, do a good job in the declaration plan of electrical spare parts and materials, the statistics of electricity, the regular maintenance, fire control and sanitation of the electrical room.

Three, responsible for regular inspection, eliminate hidden dangers, timely replacement of aging electrical lines, to prevent leakage short circuit caused by corrosion of aging lines, and make a good account registration. Report to the workshop leader and company leader in time if you find that you have connected wires or damaged electrical equipment without permission.

Four, to contact the use of electrical equipment such as wires, switches, insurance, bolts, lighting, electric furnace, motor, etc. Strengthen the education of safe electricity use knowledge to avoid electric shock and fire accidents caused by improper use.

Verb (abbreviation of verb) completes other temporary work assigned by company leaders.

Maintenance post responsibilities 15 1, maintenance electrical fitter must be trained by the competent department of the industry and hold relevant certificates.

2. Wear various tools and portable instruments before going to work. Be familiar with the underground power supply system and equipment arrangement within the scope of work. Check the insulation, appearance and suspension of fixed cables within the jurisdiction once a week, check the appearance of explosion-proof electrical equipment in use once a day, and comprehensively check the explosion-proof performance once a month. When the load is adjusted, the relay protection device of the distribution system is set in time.

3, maintenance of electrical equipment in the class, first test the surrounding gas concentration, it is strictly prohibited to exceed 65438 plus or minus 0%. Operation is prohibited when it exceeds 1%. After the power failure, only the intact test pen can be used to check the electricity, discharge and ground for equipment maintenance, and the sign "No switching on when someone is working" is hung. After the overhaul, the tools and accessories should be counted, and the equipment should be standardized according to the explosion-proof requirements.

4. For newly installed equipment, the wiring process, protection adjustment, explosion-proof joint surface, sanitation, grounding wire, equipment signs and intact cards should be inspected and maintained comprehensively and carefully on a regular basis.

5, equipment maintenance should be meticulous, find out the problem, fault handling should be meticulous, can minor repairs without overhaul, to do a good job of repairing the old and recycling.

6. Seriously study the principle and structure of new technologies and equipment, improve business skills and better serve production.

;