What is the distance between the water meter installed in the well and the wall in the building?

The water meter should be installed in a place that is easy to maintain and check, and is not exposed to sunlight, pollution and freezing; When installing spiral wing water meter, the valve in front of the meter should have a straight pipe section 8 ~ 10 times the diameter of the water meter, and the straight pipe sections before and after other water meters should not be less than 300 mm

The common part of elevator, tube well room, power distribution room and other houses. , belonging to the scope of property management. Losses caused by poor property management and maintenance shall be borne by the property. I don't know where the entrance is, but houses are usually reserved by developers to connect water pipes to the inside of the house.

Extended data:

Building water supply system can be divided into domestic water supply system, production water supply system, fire water supply system and mixed water supply system according to water supply objects and requirements. Building water supply system mainly consists of five parts: water inlet pipe, water meter node, water supply pipe network, water distribution or water equipment and water supply fittings (valves, etc.). ).

The water supply mode of building water supply system, that is, the water supply scheme inside the building, is determined according to the nature, height, layout of water distribution points, indoor water pressure, outdoor pipe network water pressure, water quantity and other factors.

Common water supply methods are: direct water supply; Water supply mode with water tank or pump; Only the water supply mode of water pump (or water tank); Air pressure water supply mode; District water supply mode. In addition, there is a way of water supply by quality, that is, an independent water supply system is set up according to the different water quality required for different purposes.

Baidu encyclopedia-building water supply and drainage engineering