Smart water meter: opening a new experience of water use

Intelligent water meter is a new type of water metering equipment. Compared with the traditional water meter, it can not only accurately measure water quantity, but also conduct data transmission and settlement transactions. This paper will introduce the installation and use of intelligent water meter to help you better understand this advanced equipment.

Select the appropriate specifications.

When purchasing smart water meters, we should choose the appropriate specifications according to the common flow, rather than just determining the caliber of the water meter by the caliber of the pipeline. At the same time, ensure that the water temperature and water pressure meet the technical requirements when using.

Precautions for installation

When installing the smart water meter, please ensure that the direction of the arrow on the shell is consistent with the direction of water flow and keep it horizontally installed. In order to avoid sun exposure and facilitate observation, choose a suitable place for installation and take heat preservation measures in winter.

Prevent hot water and steam from flowing back.

When installing a water meter at the inlet end of the boiler, it is necessary to install a check valve to prevent hot water and steam backflow from damaging the water meter.

Keep it clean and dry.

Please don't put anything above the water meter, pay attention to moistureproof. Avoid water droplets from infiltrating into the water meter controller, so as not to damage the control system and affect normal use.

Regular maintenance and overhaul

After long-term use, if there are any mistakes, please repair them in time. The lead seal on the water meter shall not be opened without authorization. If abnormal phenomena are found, please inform the water supply company or real estate company for maintenance in time.

Care should be taken when retaining dimensions.

In the installation process, it is necessary to ensure that the reserved size meets the installation requirements of the overall size of the water meter, so as to avoid tensile damage of the water meter shell caused by insufficient reserved size.