Job Recruitment Website - Property management company - Does the residential property security have professional fire protection knowledge?

Does the residential property security have professional fire protection knowledge?

Fire safety awareness that community security must have.

With the continuous improvement of the safety awareness of many urban residents, in addition to improving their own requirements, there are also certain requirements for the safety awareness of community safety. Do you know what basic fire safety knowledge you should know as a community security guard? Bian Xiao, a Chengdu security company, brings you the following dry goods knowledge explanation:

I. Safety inspection

1. Fire fighting facilities and equipment shall be inspected once a month.

2. Every inspection shall be recorded in writing.

3 the implementation of unified registration, step by step responsibility and personnel management system.

4. The security guard shall be responsible for numbering, positioning, use and maintenance of fire-fighting equipment, and check it once a month.

5. Check whether the command center can operate normally, whether the alarm probe is damaged and whether the alarm module board can communicate with the monitoring center every day.

6. Whether the emergency evacuation passage and fire indicator light are working normally.

7. Whether the fire control facilities are complete.

8. Whether the fire identification is clear and complete.

Second, the fire hydrant inspection

1. Check the fire hydrant once a month to see if there is water and the pressure is normal.

2. Bolt body condition: whether the fire hydrant is occupied by buried pressure, whether the fire hydrant leaks water, and whether the fire hydrant cap is lost.

3. Switch situation: whether the fire hydrant can be quickly opened and deliver water normally.

4. Signboard: No matter lost or clean.

5. Whether the water pressure of the fire hydrant meets the requirements and whether the remote controller can reach the required pressure within the required time.

Third, the fire extinguisher inspection

1. Is it placed in a cool, dry and convenient place? It is not allowed to be exposed to the sun, close to the heat source or subjected to severe vibration.

2. sundries shall not be piled up within 2 meters around the fire extinguisher equipment.

3. Whether the bottle and safety pin of the fire extinguisher are in good condition, whether the equipment is wiped clean, and whether the liquid of the fire extinguisher is reduced or used passively.

4. Whether the spray pipe is unblocked (if it is blocked, it should be unblocked in time).

5. Whether the pressure gauge pointer is in the green area (if it is in the red area, check the reason and fill it in time after inspection).

6. Whether the parts are complete (looseness, deformation, corrosion and damage).

7. It can be seen whether some anticorrosive coatings are in good condition (slight peeling should be repaired in time, and obvious corrosion should be sent to professional departments for maintenance and pressure test).

8. Whether the seal is intact (once opened, it must be refilled and resealed according to regulations).

9. Conduct regular inspection and maintenance on time, and check whether the nozzle and injection pipe are blocked, corroded or damaged.

Four, fire equipment inspection

1. Whether the hose, water gun, water separator and other equipment are in good condition, whether the hose interface leaks, whether the hose is moldy and whether the equipment is normal.

2. Fire ladder: the firmness of the ladder, whether the rope is in good condition and whether it can be used normally.

3. Whether the fire suit, fire axe and fire rope are in good condition.

These are common sense of community safety, but the security level is different and should be strengthened.