Who is responsible for the empty bricks in the renovation of new houses?

Step 1: First, understand the reason why the wall brick is empty.

For a large area of empty drum after the wall brick is laid, then we must know what causes it, and then we can say how to solve it. There are several reasons for the large area hollowing on the wall:

Poor soaking of tiles: For wall tiles, if you buy ordinary soaking tiles, you should soak them at least 1 hour before paving, and all tiles should be soaked in water to make the tiles absorb water. Usually, the tiles soaked in water will not absorb the moisture in the pasted cement mortar when they are laid, so the quality of tile laying can be guaranteed. If you don't do a good job of soaking, the tiles will quickly absorb the water in the cement mortar, the molding paste will quickly dry out, and the tiles will be empty. Wall foundation is not up to standard: many housing walls, the original foundation developers did not do well, there are cement standard mud, the wall is empty. If the foundation is not treated to meet the requirements of wall tiles before they are pasted, then after the wall tiles are pasted, there will be empty drums. At this time, the empty drum is not the empty drum of tiles, but the empty drum of walls. Master's tiling technology is not up to standard: for some masters, their tiling technology is not up to standard, and the wall tiles are not laid according to the construction technology, which will cause quality problems after the wall tiles are laid, including the problem of empty drum. Incorrect use of paste materials: For ordinary water-soaked bricks, cement mortar can be directly used for paving, but the wrong proportion of cement mortar will lead to the cement mortar paste materials not meeting the standards. Cement mortar can not be used when laying floor tiles and wall tiles, but tile glue can be used to ensure the quality. If you don't do a good job of pasting materials, it will also cause the phenomenon of empty drum of wall bricks. Floor tile wall brush adhesive: it is very popular to brush adhesive on floor tile wall now. Because of the low water absorption rate of floor tiles, the back glue must be brushed before paving to ensure the adhesion between tiles and paste materials and the paving quality of wall tiles. If you don't brush the back glue, then the wall tiles will fall off. Step 2: Find out the reason why the wall brick is empty, and know the reason why the wall brick is empty. Next, we need to find out the reason according to the empty drum position of the wall brick, as follows:

1. One corner of the wall brick is empty.

If there is a large area of wall brick hollowing, but it is basically at the corner of the wall brick, then the reason for this hollowing can be basically determined to be caused by the poor paving skills of the master, and the responsibility for completion is borne by the mason master.

2. Irregular hollowing of wall tiles

If the wall tiles are completely irregular in a large area, it can be said that in the case of using soaked bricks, it can be basically said that there are three reasons: the tiles are not soaked well, the master's tiling technology is not enough, and the paste materials are not used correctly. It depends on who bought these materials. The buyer shall be responsible for the unqualified materials, and the bricklayer shall be responsible for other reasons.

3. The wall brick is empty, but the wall is empty.

For wall brick paving, it will not stick to the top. At this time, you can use a professional hollowing hammer to check whether there is hollowing in the wall above the wall brick with hollowing. If it is found that the wall is also hollow, it can basically be determined that the wall brick is hollow, because the original wall is basically not up to standard. In this case, if the mason informs the owner, and then the owner wants to contact the property maintenance, and the owner does not respond, then the responsibility shall be borne by the owner; The bricklayer didn't tell us that the bricklayer was responsible for half, and the developer was not responsible for the wall foundation.

4. Large area hollowing on the upper wall of floor tile

For the upper wall of floor tile, if there is a large area of wall tile hollowing, it can be basically determined that it is caused by construction and pasting without brushing back glue and tile glue. If the bricklayer tells the owner that he needs these materials, and the owner wants to save money and insists on paving with cement mortar, then all the responsibilities shall be borne by the owner; If the bricklayer doesn't tell us, then this matter has to be borne by the bricklayer and the tile shop, because both the bricklayer and the tile shop have the obligation to tell us the particularity of the tile wall.

Step 3: How to solve the problem of empty bricks in new house decoration? At present, the wall brick has been hollowed out in a large area, and this fact cannot be changed. At this time, it is the key to consider how to solve it, because in this case, the owner can basically bear all the follow-up treatments and losses, which is also an important embodiment that self-assembly will make the owner a vulnerable group. It is almost impossible to find a mason to compensate for the loss. At this point, you can solve the problem of tile hollowing according to the following methods, as follows:

1. Ordinary soaking brick

For the common water-soaked brick paved on the wall, you can find a professional to check it first and find out the location and reason of the empty drum. If the empty drum is only a corner and a part, then basically only the empty drum part needs to be eradicated and repaved, and the problem can be basically solved. If it is confirmed that the original wall foundation is not up to standard and the empty drum is serious, it is suggested that all the wall bricks should be eradicated, and then the wall bricks should be resurfaced after foundation treatment, because only in this way can the wall bricks not fall off and there will be no potential safety hazard; For ordinary water-soaked bricks with paved walls, if the empty drum area is too large and there is a hidden danger of wall falling off, then all the wall bricks should be eradicated and paved again. So as to ensure safety. 2. Floor tiles on the wall

For the tiles on the wall, there is nothing to consider after a large area is hollowed out. There is only one solution, that is, to eradicate all the wall tiles and then spread them with the standard technology of wall tiles. Only in this way can the safety of wall tiles be guaranteed.

To sum up, the idea of saving some expenses through self-installation in the renovation of new houses is completely understandable and can be self-installed. But before choosing a master, you must look at the construction site built by the master, understand the skills and personality of the owner who has used the master, and then decide whether to use it. If you don't do such a survey, you can directly use the introduced master to decorate, and the consequences of empty wall bricks should be borne by the owners themselves.