What is the procedure for the renovation of blank houses?

Decoration process of rough house 1: design planning? First of all, the first step is to make an overall planning and design of your own rough house before decoration, mainly to determine the direction of your own house decoration, determine the structural layout, determine the decoration style and so on; ? Rough house decoration process 2: overall demolition? After planning, you can dismantle the blank house as a whole according to your planning and design, mainly for walls, doors, windows and stairs. Pay attention to the position of the load-bearing wall when removing the wall, and don't remove it wrong; ? Blank house decoration process 3: concealed works? This part mainly includes hydropower transformation and waterproof engineering. In general, water and electricity can be installed after the demolition and reconstruction work is completed. Firstly, determine the position of the socket switch in each place, and then wire it according to the position. Anyway, it is carried out in accordance with the principle of reasonable safety, and then the waterproof project, which must be paid attention to, and the closed water test is also for waterproofing; ? Rough house decoration process 4: wall and floor tiles? After waterproofing is finished, you can stick bricks when the waterproof material is dry. Remember, when sticking bricks, you must be careful not to destroy the waterproof layer. Otherwise, the wall tiles will be dismantled and waterproof again, which is troublesome. ? Rough house decoration process 5: painting the wall? First, the wall is treated at the grass-roots level, then putty is scraped, leveled and polished, and finally painted. The steps are very clear, mainly depending on the effect of the painting. There can be no chromatic aberration, and it should be painted everywhere; ? Rough house decoration process 6: floor? Level the ground first, then lay the floor. Pay attention to the gaps between plates when paving the floor, and the neatness should be good-looking; ? Rough house decoration process 7: installation project? This mainly includes the installation of socket switch, kitchen and bathroom equipment, ceiling, etc., which can be carried out at the same time without spending too much time.