What is the waterproof height standard of toilet?

Waterproof project is the most important process when building a toilet, because the quality of waterproof project will directly affect the safety and comfort of living. So how much is the waterproof height of the bathroom suitable? How to make the bathroom waterproof? Let's take a look with Bian Xiao!

How much is the waterproof height of the bathroom suitable:

1, waterproof height of wall surface

The waterproof height of the bathroom wall is preferably above 30cm. If it is not a load-bearing wall, the waterproof height of bathroom wall is 1.8m, that of shower room is 1.8m, and that of bathtub is about 30cm higher than that of bathtub.

2, toilet washbasin, urinal waterproof decoration height

The waterproof height of the washbasin in the bathroom should be more than 30cm from the ground to the washbasin. If a toilet is installed in the bathroom, the waterproof height should be about 1.8m above the ground to avoid leakage.

3, bathroom floor waterproof decoration height

The thinnest waterproof part of the toilet floor should not be less than 2-3 cm, because the waterproof thickness will directly affect the waterproof effect, so it is best to smooth it at one time during construction.

4. Waterproof decorative height of bathroom floor tiles

In addition to the waterproof floor, the floor tiles and walls of the bathroom should also be waterproof. The waterproof layer here should be 25-30cm higher than the ground, so that there will be no problems such as water leakage.

5. Waterproof decoration height of toilet sewer

The height of the water seal of the toilet sewer floor drain is preferably above 5cm. In addition, the joint between the wall and the water pipe should be carefully waterproof.

How to waterproof the bathroom:

1, first use cement slurry to find the slope at the floor drain, but the surface should be smooth. The slope near the door is small, and the slope of the floor drain is large.

2. The pipeline passes through the floor root and floor drain. After passing through the pipe, it should be sealed with glue, leveled with cement, and then coated with glass fiber 1~2 layer.

3. The wall should be clean and smooth, free of floating ash and small particles, and the junction between the wall and the ground should be painted into the original angle or slope angle. Stick glass fiber cloth reinforcement layer 1~2 when brushing waterproof paint.

4. The waterproof thickness of polyurethane should be above 1.5 mm, and the roots and corners of the pipeline should be brushed first, and then painted and scraped on a large area after the surface is dry. There must be no leakage and bubbling.

5. Brush the facade first, then the plane, but the direction of the second time should be perpendicular to the direction of the last time, and finally coat the film. After curing, the coarse sand particles are thrown away to facilitate the combination with cement mortar in the future.

6. The waterproof layer on the ground is generally 300mm wide outside the bathroom door, and the waterproof layer is 200mm above the ground.

7, do 36 hours closed water test.

The article concludes: Well, that's enough knowledge about how appropriate the waterproof height of the bathroom is and how to do it. If you need more information, please continue to pay attention to Qijia. We will provide you with better and more exciting content in the future.