Responsibilities of the Quality Department

Responsibilities of Quality Department (20 general rules)

In today's society, job responsibilities are more and more widely used in life. Job responsibilities refer to the work content that a post needs to complete and the scope of responsibility that it should undertake. So how are the relevant job responsibilities formulated? The following are the job responsibilities of the quality department that I collected (20 are common). Welcome to read, I hope you will like it.

Responsibilities of Quality Department 1 Responsibilities:

1, for standardization construction. Including the standardization of procedures, systems and rules for specific businesses such as case management, early management and project management;

2. Monitor the service quality and service level of the property project, submit the project property quality inspection report, point out the shortcomings, put forward improvement suggestions, and analyze and explain the key issues;

3. Participate in the handling of major property complaints;

4. Organize the property service satisfaction survey and monitor the satisfaction status;

5. Responsible for supervising the timely rectification of all kinds of quality problems;

6, regular routine quality inspection and service quality evaluation;

7. Complete other tasks assigned by the company.

Requirements:

1, under 45 years old, college degree or above;

2.3 years or above quality management experience in property management industry;

3. Understand the advanced quality control tools in the industry;

4, familiar with property management regulations, laws, customer relationship management and other related professional knowledge.

Responsibilities of the quality department. Familiar with relevant national policies and industry management service standards, with strong ability to observe, analyze, judge and coordinate things.

Second, under the leadership of the general manager (deputy general manager of division of labor), implement the planning, improvement, supervision and management of the company's brand, and manage the system "Responsibility of Quality Department of Property Company".

Third, assist the general manager to establish a quality management system, report to the general manager regularly at the end of each month, and improve the measures and effects taken by the service quality.

4. Be responsible for formulating the employee's code of conduct, service quality assessment and reward and punishment standards. Check the implementation at any time, as well as the new situation and new problems found in the process of supervision, for leadership decision-making reference.

Five, cooperate with the personnel administrative department to improve the overall quality of employees, train qualified employees for the development of the industry, and provide reserve talents.

Six, democratic style, adhere to principles, handle affairs fairly, do not follow the affair, in-depth investigation and study at the grass-roots level, in view of the problems existing in the service quality, timely feedback, rapid processing, to ensure the smooth management of services, government decrees, a virtuous circle.

Seven, responsible for employee rewards and punishments, accept complaints from owners and employees, find out the reasons and submit a report on handling opinions to the general manager, so that each piece is recorded, each piece is implemented, and everything is answered.

Eight, responsible for organizing the annual debriefing report of management personnel, presiding over the annual work summary of the department foreman, and reporting the assessment to the general manager in time.

Nine, have the right to suggest to the general manager of the company to adjust or dismiss the director-level personnel of the property service center, and have the right to dismiss or fine the personnel below the director-level personnel of each property service center. Responsible for finding and recommending internal management personnel to the general manager of the company.

Job responsibilities of Quality Department Article 3 Job responsibilities:

1. Be responsible for formulating the safety standards of all departments, making daily supervision and specifying the number of daily inspections;

2. Be responsible for the improvement and rectification of workflow, and define the process and time nodes of each link of "distribution-implementation-feedback";

3. Responsible for the safety guidance and control of major activities, put forward control measures for large-scale activities and important events and supervise the whole process;

4. Be responsible for formulating the quality management methods of each department and controlling the work of each department from the perspective of quality;

5. Be responsible for complaining about the company's events and reporting to the superior leaders in time;

6. Responsible for sorting out the service processes of various departments and checking their completion, formulating control measures and submitting reports regularly; 7. Complete other work arranged by superior leaders.

Requirements:

1. Full-time college degree or above, majoring in safety management and quality management engineering;

At least 2.5 years working experience in engineering safety management;

3. Familiar with national safety laws and regulations, familiar with production site safety workflow, safety operation norms and safety management procedures;

4. Familiar with construction production process, safety protection, fire protection, temporary electricity consumption and other related safety regulations, standards and daily safety management, with a high sense of responsibility.

5. Have certain coordination, organization and communication skills, and have certain language expression skills. Job responsibilities:

Responsibilities of Quality Department 4 1, leadership, supervision, review, evaluation and modification of property management functions and working ability.

2. Implement government regulations, decrees and property management conventions, and maintain good relations with relevant departments.

3. Formulate the annual property management budget of the project, and manage the service quality, operation management process and financial operation of the daily property.

4, properly handle all kinds of emergencies and emergencies.

5. Supervise the operation of project assets (such as clubs, parking spaces and houses). ).

6, responsible for the coordination and management of greening, safety and other related work.

7. Complete the collection rate of property fees.

8. Responsible for handling complaints from tenants and owners, maintaining the environmental sanitation of the community and maintaining public order.

Responsibilities of Quality Department 5 1, personnel familiar with the facilities and equipment in the park.

2, responsible for the procurement of property engineering parts and inventory ledger management.

3. Assist the property manager in daily management and personnel management, including greening, cleaning and maintenance. Overall arrangement of departmental project work, and follow up the supervision progress.

4. Be responsible for the water meter statistics in the park.

5. Obey and do other things related to leadership handover.

Responsibilities of Quality Department 6 1. Grasp the market dynamics and provide accurate industry market information feedback for the company.

2. Do a good job in market research and maintenance, and expand customer resources.

3. Conduct independent survey and calculation of the project and bid independently.

3. Assist the general manager to explore the market and tap potential customers.

4. Complete the property market expansion task assigned by the company.

Responsibilities of Quality Department 7 1. Assist the general manager to formulate the quality policy and determine the quality objectives and work responsibilities of the quality department of the property management company. Assist the general manager in management review.

2. Assist the management representative to organize the compilation and revision of quality manuals, procedure documents and operation documents. Assist management representative to conduct internal audit.

3. Assist the leaders in charge to organize the performance appraisal of the unit and the person in charge of the unit; Responsible for the performance appraisal of employees in the department.

4. Under the leadership of the management representative, be responsible for organizing the company's quality work, and guide, inspect, assess and supervise the quality work of various project departments, professional companies and other functional departments.

5 responsible for organizing the implementation of quality management system certification, supervision and audit.

6. Be responsible for organizing quality management knowledge and skills training for internal auditors. Assist the human resources department to organize and implement quality management training for middle and senior managers.

7. Responsible for the centralized management of complaints caused by inadequate management services and mistakes of the company; Responsible for directly accepting the complaints from the owners (users) to the company, handing them over to relevant departments for handling, tracking the handling of complaints and verifying the implementation effect of corrective measures; Assist company leaders to deal with major complaints.

8. Assist the management representative to communicate with the outside world on matters related to quality management.

9. Assist the company leaders to put forward the company system construction plan, and organize its implementation in detail to ensure the integrity of the company system.

10. Clean up the company's institutional documents in time, establish the company's institutional documents list and update it in real time, and distribute it to various project departments, professional companies and other departments of the company for implementation.

1 1. Formulation and revision of institutional documents for centralized management. Conduct a unified preliminary examination of the institutional documents drafted by each unit, and have the right to return the institutional documents that do not meet the review requirements to the drafting unit for revision and re-submission.

12. Be responsible for investigating and verifying typical cases of excellent performance in implementing quality management system documents and other systems, and cases of violating the company's quality management system documents and other systems, and submit the investigation report to the Human Resources Department for processing.

13. Responsible for supervising the key work of the company.

14. Complete other tasks assigned by leaders.

Responsibilities of Quality Department 8 I. Responsibilities:

1, responsible for ensuring the implementation of the quality management system in this department;

2, approved the release of the company's inspection procedures and other quality management documents;

3. Assist the management representative to organize internal audit activities, revise, publish, recycle and review the company's quality management system documents;

4. Apply and control statistical techniques and data analysis in quality control;

5. Organize, implement and supervise the quality control of the whole process of product production;

6. Approve the disposal of general nonconforming products;

7, responsible for product quality veto and product release;

8, responsible for the examination and approval of quality records and the supervision and inspection of the implementation of each department;

9. Track and check corrective and preventive measures;

10, participate in quality planning and management review;

1 1, responsible for technical training, work arrangement, scheduling and organizational management of employees in various positions of the department;

12, responsible for the management and control of internal product warehouse and semi-finished product warehouse.

Second, the qualifications:

1, male or female, decent, conscientious and down-to-earth, meticulous in work and strong in quality awareness;

2, familiar with medical device quality management system, product inspection standards and product quality inspection related knowledge;

3. Be able to independently formulate inspection procedures, guide inspectors to improve inspection skills, have good organization, coordination and communication skills, and have work experience in leading teams;

4. More than three years working experience in the same position, and experience in quality management of orthopedic medical devices is preferred.

Responsibilities of Quality Department 9 1. Under the direct leadership of the general manager, according to the company's central work in various periods and the company's development plan, formulate project management objectives, be responsible to the general manager, fully implement the project property management, and improve the quality of property management services.

2, responsible for the overall coordination of the provincial and municipal departments where the dealership is located.

3. According to the annual plan, establish and improve the rules and regulations and business processes required by the project, and supervise, arrange and inspect the work of subordinates.

4. Be responsible for drafting rules and regulations, emergency plans, work processes, standards and specifications for operation and management of engineering, security, cleaning and customer service, and submit them to the company for approval before implementation.

5. Be responsible for spot-checking the service quality of dealers in the region, and comprehensively improve the comprehensive quality of employees.

6. Improve the service level of distributors in the province.

Responsibilities of Quality Department: 10 1. Be responsible for formulating and implementing the rules and regulations on safety and fire control in shopping malls.

2, the mall safety control, examination and approval of the use of open flame operation application, and organize personnel to carry out supervision and inspection.

3. Rehearse the public security, fire fighting and fire emergency measures plan in the responsible area of the shopping mall, and organize fire drills regularly.

4, responsible for maintaining the order of shopping malls, squares, parking lots, check and prevent public security accidents, assist and cooperate with the national public security department to detect public security and illegal and criminal cases.

5. Handle all kinds of customer safety complaints and strive to create a good public security environment.

6. Be responsible for the maintenance of fire-fighting facilities, fire-fighting equipment and fire safety signs in shopping malls.

7. Be responsible for training employees on safety, fire control knowledge and relevant laws and regulations.

8, responsible for establishing and improving the safety work files.

9. Complete other tasks assigned by superior leaders.

Responsibilities of Quality Department: 1 1 1. Responsible for the overall planning and implementation of energy consumption management, engineering maintenance, equipment management and decoration management in property management projects.

2. Be fully responsible for the acceptance and data verification of power supply, air conditioning, water supply and drainage, fire fighting, elevators, weak current systems and architectural decoration projects of property projects.

3. Make annual, quarterly and monthly maintenance plans for public facilities and equipment, and supervise their implementation.

4. Manage the contract review related to the business of this department. Responsible for communication and relationship maintenance with the outreach staff of relevant departments, and provide training and guidance to the related business of the engineering team.

5. Be fully responsible for the management, operation and maintenance of all equipment and facilities.

6, responsible for the handling of community emergencies.

Responsibilities of Quality Department 12 1. Job responsibilities of quality department supervisor.

(1) Be fully responsible for the daily work of the Quality Department.

(2) According to the company's strategic planning, formulate the quality management implementation plan, and be responsible for the promotion and maintenance, maintenance and effective operation of the quality management system in our factory.

(3) According to the company's quality management norms and product quality standards, formulate inspection norms for raw materials, outsourced parts, process products and finished products, and define inspection methods, inspection procedures and disposal of defective products.

(4) Grasp the key points of quality control, formulate operating standards for key and special processes and assist relevant department personnel to implement them.

⑤ Handle customer complaints properly according to the company's requirements, and strive to be fair and objective.

⑥ Take the lead in organizing relevant departments to investigate and analyze quality accidents, put forward disposal suggestions to prevent similar accidents from happening again, and establish a quality accident account at the same time.

⑦ Check the quality of the production process, deal with the quality problems in each process of product realization in time, and ensure that the company's quality meets the customer's needs.

Responsible for the ideological trends and team building of employees in this department.

Pet-name ruby do a good job of cooperation between this department and other departments.

Attending to organize the formulation of quality management system and post responsibility system.

2. Responsibilities of the person in charge of quality inspection

(1) is responsible for making the work plan of the department, checking the implementation at any time, summarizing the work, arranging the inspection according to the production plan, and ensuring the timely and accurate reporting of the inspection results.

(2) responsible for the whole process of WIP production quality management and control inspection.

(3) Lead subordinates to carefully inspect and ensure the quality, and make a decision on whether the product or semi-finished product is qualified according to the quality and technical standards and combined with the product drawings or relevant technical documents;

(4) Dare to adhere to principles, have a clear attitude on major quality issues, and report difficult problems that are difficult to decide to the company's supervisor.

⑤ Hold an inspection team meeting every morning to keep abreast of the internal quality trends of the company.

⑥ Evaluate the inspectors' working ability and performance irregularly.

⑦ Support, establish and improve the quality assurance system related to inspection.

Go deep into the team, transfer quality professional knowledge, educate and train employees, and improve the quality awareness of all staff.

Pet-name ruby to guide and manage the inspection work of its members.

Attending to properly handle nonconforming products and scrapped products.

3, quality inspector job responsibilities:

(1) responsible for the company's online inspection of products in each process and the factory inspection of finished products.

(2) Inspectors should be familiar with and understand the product drawings and process documents, and understand the structure, performance and use requirements of the inspected products.

(3) Inspect the product quality according to technical standards.

(4) Strictly batch product inspection, and the inspector has the right to put forward constructive opinions to relevant departments on production conditions, materials used, inspection equipment and other issues according to the quality requirements of the inspected products.

⑤ Control, inspection and supervision of key and special process quality.

⑥ Inspectors have the right to refuse to inspect some irresponsible fake and inferior products that seriously violate technical requirements, so as to avoid a large number of defective products.

⑦ Provide quality feedback data to relevant department leaders and production workers, analyze the reasons according to the problems existing in products or parts, and put forward suggestions for prevention and improvement for the reference of competent leaders and relevant department leaders.

⑧ According to the process flow card and technical standard conditions (drawing requirements), make inspection records of various items, prevent false inspection and missed inspection, find defective products in time and mark them properly, request and urge the workshop to take effective measures for detailed management, and prevent defective products and unqualified products from being mixed with qualified products, thus burying quality hidden dangers.

Pet-name ruby issued by the product or component quality certificate.

4, the experimenter job responsibilities:

① Responsible for incoming inspection of all raw materials of the company.

(2) Responsible for the incoming inspection of the company's outsourced parts.

③ Be responsible for the daily management and calibration of internal inspection instruments, measuring tools and calipers.

(4) put forward opinions or suggestions for improving the inspection methods and standards of raw materials and outsourced parts.

⑤ The inspection reports in daily inspection are distributed to the corresponding departments in time.

⑥ Daily inspection data is accurate and records are complete.

⑦ Regularly sort out and summarize the inspection items, understand the quality changes of raw materials in the supply process, and make all records.

⑧ Regularly report the implementation of laboratory inspection at this stage to the competent leader.

Responsibilities of Quality Department 13 Description of responsibilities:

1. Participate in the formulation of the company's development strategy and annual business plan, and organize the formulation and implementation of the production strategic plan;

2, organize the formulation of annual production management, technical support and other work plans, and decompose and refine;

3. Be fully responsible for the company's production and operation management, and be responsible for the establishment and improvement of relevant system processes and team training construction of the production and operation system;

4. Responsible for purchasing, maintaining and improving production equipment;

5. Keep abreast of the production situation, coordinate the communication and cooperation between various departments, and solve the problems in production in time;

6, responsible for handling major problems and problems in the process of production and operation;

7, organize the implementation, supervision and regulation of production process indicators, to ensure the realization of the annual target;

8. Be responsible for training, motivating and leading subordinate management teams, ensuring that their abilities and enthusiasm are constantly improved and promoting the realization of various goals.

Requirements:

1, college degree or above, aged 30-45;

2, rich experience in equipment management and maintenance, experience in photovoltaic bracket factory management is preferred, aluminum industry can also be;

At least 3.5 years management experience as operation manager or director.

Responsibilities of Quality Department 14 Description of responsibilities:

1. Verify the software version of the commercial chip;

2. Design ap and cp related test cases of mobile phone chips;

3. The test and verification module mainly includes audio/camera /WiFi/ Bluetooth/modem;

4. Analyze and locate the bugs in the test verification, sort out and publish the test verification report;

Requirements:

1. Bachelor degree or above. Major: communication, computer, electronics and related majors are preferred.

2. Skillful use of bug management tools such as clearquest/jira;

3. Familiar with at least the following 1 protocol modules, and familiar with two or more protocol modules is preferred: including (audio/camera /WiFi/ Bluetooth/modem);

4. Good reading and writing skills in Chinese and English, proficient in Korean is preferred;

Personality requirements:

1. Good learning ability, team spirit, sense of responsibility and initiative.

2. Self-motivation, pursuit of results and innovative thinking

3. Open-minded and willing to accept challenges

Responsibilities of Quality Department Article 15 Main work contents:

1. Inspection of raw materials, finished products and samples, on-site inspection and sampling inspection.

2. Non-conforming product management and customer return processing

3.iso document number, login, distribution, recycling, etc.

4. Responsible for quality improvement activities

5. Manage and guide subordinates and complete other tasks assigned by superiors.

6. As a reserve cadre (section chief) of the quality management department of the manufacturing department, I hope to be able to manage the quality management department of the manufacturing department in the future.

7. Work training in Shanghai and Japan about 2 -3 years in advance. After the completion of the new factory, he returned to Pinghu as the alternate cadre (section chief) of the quality management department of the manufacturing department.

(Choose the best one to go to Japan)

Requirements:

1. The household registration is unlimited.

2. About 40 years old and below.

More than 3.3 years working experience in charge of quality management department.

4. Japanese level 1 is equal to or above, and there is no problem in communicating with Japanese personnel.

5. major in chemistry, working experience in chemical enterprises is preferred.

Responsibilities of Quality Department 16 Responsibilities:

1, production and quality field technicians or managers;

2 daily production management, including production technology, production efficiency management and quality management;

3. Assist in the production, testing and evaluation of new product samples;

4. Guide production and handle abnormal production;

5. Reports required for daily production management, site management, quality management, staff management and training;

Qualifications:

1, familiar with the assembly and production process of electronic products, with more than 2 years working experience;

2. Be able to use relevant office software;

3. Knowledge of iso, or experience in iso enterprise operation is preferred;

Job Responsibilities of Quality Department 17 Job Description:

1. Optimize the quality documents according to the spirit of is0900 1/ts 16949 to ensure the effective implementation of the documents;

2. Optimize the existing process control methods to make them more simple and effective;

3. Be responsible for the investigation, analysis and improvement of customer complaints and on-site quality anomalies;

4. Be responsible for the quality confirmation and control of new product introduction;

5. Management of on-site measuring tools and checking tools;

6. Organization and tracking of quality meetings;

7. Quality-related training management;

8. Planning and effective implementation of grading audit;

9. There are about 50 quality supervisors, quality engineers and the whole quality team.

Requirements:

1. major in mechanical engineering, bachelor degree or above;

At least 2.6 years mechanical product quality management/concept, including 3 years working experience as quality supervisor;

1. Familiar with the operation of iso900 1/ts 16949 system;

2. Practical experience in seven qc tools, msa, control plan, fmea and other quality tools;

3. Understand the quality control of new product introduction;

4. Master pdca to improve circulation, and have 8 days and 5 whys of practical experience;

5. Skillful use of office software.

Job Responsibilities of Quality Department 18 Job Description:

1, responsible for the overall work of quality management and handling related quality affairs within the scope of authorization;

2. Arrange the daily work of relevant quality personnel (subordinates), and inspect and supervise their work;

3, develop a total quality management system, formulate quality inspection standards, and organize quality personnel to implement;

4. Organize the formulation of quality plans, discuss with members of other relevant departments, and formulate plans to improve and improve quality;

5. Investigate and analyze quality accidents, put forward handling opinions and report them to the leaders for approval;

6. Evaluate the work of members of this department.

Requirements:

1, regardless of gender, 28-40 years old, college degree or above in business management related major, more than 5 years of quality work experience and more than 2 years of quality management work experience;

2. Have professional knowledge of quality management and be familiar with quality management workflow;

3. Have good personnel management and quality management skills and good communication and coordination skills.

Work unit and address:

A. Nanning/Wuming District

B. Nanning/Binyang County

C. Yunnan/Xishuangbanna

Job Responsibilities of Quality Department 19 Job Description:

College degree or above in food, beverage, biology and other related majors.

More than 2.5 years working experience, including more than 3 years related experience in quality management and team management.

3. Familiar with the implementation of ISO, HACCP and other systems, as well as the relevant laws and regulations of the food industry.

4. Good organization, coordination, communication and expression skills, strong execution.

5. Working experience in beverage and dairy enterprises, familiar with aseptic production line is preferred.

Requirements:

1, responsible for the construction and daily management of the quality team.

2. Be responsible for the construction, improvement and implementation of the factory quality system.

3. Responsible for the quality control of raw material procurement, production process and delivery, and coordinate the quality management of procurement, R&D and production departments.

4. Be responsible for analyzing product quality problems, providing solutions and handling customer complaints.

5, complete other things assigned by the leadership.

Responsibilities of Quality Department 20 1. Establish, improve and maintain quality management system and quality system.

2. Responsible for the design, modification and improvement of all QE programs, working documents and forms.

3. Be responsible for the formulation and change of all product inspection standards.

4. Responsible for the development and evaluation of new suppliers and the follow-up quality management and audit of old suppliers.

5. Be responsible for the work arrangement of QE personnel and manage the performance of QE personnel.

6. Responsible for providing technical support.

7. Be responsible for the training and guidance of QE personnel's products and work skills.

8. Be responsible for the summary, filing and analysis of quality records.

9. Responsible for the transmission of quality information and the handling of quality anomalies.

10. Handle customers' quality complaints, returns and complaints.

1 1. Process inspection and final inspection of products (engineer).

12. Identification of samples and prenatal samples (engineer).

13. Arrangement, archiving and delivery of records and pictures (Engineer).

14. Preparation of defective products (engineer).

;