How to use the elevator IC card?

Elevator IC cards are divided into multi-layer cards, single-layer cards, direct swipe cards and layers to be selected when swiping cards.

Elevator IC cards are divided into networking type and intelligent offline type.

IC card elevator data intelligent off-line collection/authorization/loss reporting mobile phone is used for the collection/authorization/loss reporting of the ID card elevator controller that is not connected to the Internet in Oddo Company.

IC card intelligent offline elevator data acquisition/authorization/loss reporting mobile phone technical parameters;

1) uses a square battery with working current.

2) large screen dot matrix liquid crystal display;

3) Use environment:

Temperature: 0-60 degrees Celsius

Relative humidity: 20%-95%;

4) USB interface is adopted;

5)5mb storage capacity

6) Built-in real-time dual clock.

7) Product model: DAIC DT CJ.

Technical parameters of CPU card elevator access controller:

1. Communication interface between main control board and computer: RS485 or TCP/IP.

2. Communication distance:1200m.

3. Communication between access control reading head and main control board: Wigan or RS485.

4. Number of users: unlimited

5. Number of records:100W

6. Number of control layers of single board: 30 layers (which can be extended to 120 layers)

7. Maximum number of elevators: 255.

8. Support card type: ID card IC card CPU? card

9. Elevator access control method: credit card, password, PC (networking required).

10. Control elevator output: relay (passive)

1 1, card reading time: less than 0.2s

12, model: DAIC DT MJMB

Technical parameters of ID card elevator access control reading head:

1, input voltage: 190~250VAC 50/60 Hz.

2. Output current: 3A

3. Output voltage: 12VDC /24VDC.

4. Output power: 60W

5. Input fuse specification: 3.0 A /250 V AC.

6. LED lights use backlight to indicate working status.

7. Output short circuit protection, overload protection, overcurrent protection and surge protection.

8. Product size: 88mm (length) * 55mm (width) * 30mm (thickness)

9. Product weight: 0.0 15Kg

10, model: DAIC-DT-RW

Issuer of IC card elevator access control management center:

1, working mode: USB

2. Card swiping interval: < 0. 1 sec.

3. Card reading type: ID card, IC card, CPU card, etc.

4. Working temperature: -25℃-75℃

5. Internal antenna: Yes

6. Built-in speaker: buzzer

7. Working voltage: USB power supply.

8. Communication distance: 3 meters

9. Transmission mode: real-time duplex.

10, card reading speed: < 0.2 seconds.

1 1, sensing distance: 3- 10CM.

12, card reading frequency: 125KHz, 13.56MHz.

13, working humidity: 10-90%

14, built-in LED: bicolor LED

15, model: DAIC DT MJRW

Functional characteristics of IC card intelligent off-line elevator data acquisition/authorization/loss reporting mobile phone

1, adopting RS485 communication mode, and the farthest distance can reach1200m; ;

2, the controller and the card reader are designed separately, which has high security;

3. The main control board and the card reader adopt Wigan communication mode;

4. 8 effective time periods per day;

5. The number of users supported is not limited, and can be upgraded;

6. Credit card record10w; ;

7. Various cards, management cards, safety cards, user cards, patrol cards, cleaning cards, maintenance cards, etc. ;

8. The block board controls 30 floors, and is connected to the expansion board control 120 floor at most;

9. Exchange access function;

10, intercom access control networking function