How to install the bathroom ceiling?

How to install pictures on the bathroom ceiling

Installation method of aluminum gusset ceiling.

1, according to the design elevation of aluminum gusset ceiling, the elastic line should be clear and accurate, and its horizontal allowable deviation is 5 mm

2, along the elevation line fixed Angle aluminum, Angle aluminum is the role of ceiling edge sealing, Angle aluminum commonly used specifications for 25*25mm, its color should be the same as the aluminum alloy panel, Angle aluminum multi-purpose cement nail fixed on the wall column.

3. Determine the position line of the keel. Because each aluminum alloy plate is a decorative plate formed at one time, it can't be cut into pieces. In order to ensure the integrity of the ceiling facing and the reliability of installation, it is necessary to arrange the structural size of the ceiling skeleton according to the size specifications of the aluminum alloy and the area of the aluminum gusset ceiling. The basic layout of aluminum alloy square veneer is: the combination of plates should be complete, the edges should be symmetrical and even, and the arranged dragon skeleton position line should be drawn above the elevation line.

4. When installing the aluminum gusset ceiling, pay attention to the spacing of the main keel lifting points, and select the recommended series according to the design. The middle part should be bulging, and the bulging height of the keel should not be less than 1/200 of the room span. The position and height of the main keel shall be corrected in time after installation. To control the smoothness of the dragon skeleton, we must first pull out the vertical and horizontal elevation control lines, and start from one end, while installing and adjusting the hanging height of the boom. After the bedding face is leveled, adjust some single keels with bent edges until the leveling meets the requirements.

5. According to the specifications and dimensions of the aluminum gusset plate, install the secondary keel matched with the plate, and hang the secondary keel on the main keel through the hanger. When the length of the secondary keel needs to be extended by more than one, while hanging the secondary keel, connect the opposite ends with the secondary keel connector, straighten it first and then fix it.

6, comprehensive correction of the main and secondary keel position and levelness. The connector should be installed in the wrong position. Check whether the installed aluminum gusset ceiling frame is firm and reliable, and the next step of construction can be carried out only after it meets the relevant specifications.

7. Straighten the secondary bone when installing the aluminum gusset plate. The gusset plate shall be flat without warping, and the flatness error of the ceiling plane shall not exceed 5mm. ..

8, aluminum gusset plate should be cleaned up in time after installation.

How to remove the bathroom ceiling?

Generally, there will be a spare part for the ceiling, which is the last piece installed. As long as you find that spare part, you can remove it. The last piece of plastic gusset plate is directly stuck on it, just move it to the wall. When moving hard, pat the pinch plate with your hand. After this piece is removed, the others are fixed with screws. Just remove the screws one by one. The same is true for the method of dismantling long aluminum gusset plates. The removal method of integrated ceiling is basically the same as the above method, and it should be said that it is easier to remove than the above two kinds of ceilings.

How to dismantle the square aluminum gusset ceiling in the bathroom?

Partially supporting the first floor.

However, in the final closing stage of the ceiling, plates are usually cut because of the length problem. At this time, the gap between the cut plate and the edge strip may be large, so it is necessary to use glass glue to prevent the gusset plate from tilting.

But I really don't understand, since the master is nice and in the community, why not ask him for help directly? Maybe the problem is simple. If you can't, you'll screw up. If you really want to remove the keel, don't you just call the installer?

And now the most important thing is to find out whether the floor is leaking or the water pipe is leaking. Therefore, you can first open the pinch plate closest to the sewer pipe with a suction cup and buckle it on the triangular keel to determine the situation.

Water leakage of the floor should be waterproof, and water leakage should be repaired. It is best to inform the property to solve it together.

How to install the gusset plate of bathroom ceiling

The installation steps of bathroom integrated ceiling are as follows:

1, clear location

According to the site conditions, the layout of electrical appliances and keels is defined in the design drawings. To determine the installation height of the ceiling, Yuba can generally achieve the maximum effect between 2.1m-2.3m. ..

Step 2 ensure the level

After the height is clear, do horizontal installation corner line. Fix the corner lines with screws or glue (to prevent the tiles from being damaged), and the corners shall be collaged neatly without obvious gaps.

3. Punching and positioning

After the keel position is determined, drill holes with an impact drill. Cut the concrete length of the lining and assemble the suspender screws. The suspender screw is fixed in the drilling hole. This step can be carried out simultaneously with the previous step.

Step 4 Install the keel

Install the main keel on the fixing ring under the suspender screw and fix the triangular keel on the main keel. Adjust properly after installation, and gradually tighten the screws at the joint to ensure straightness.

5, the ceiling shelf

There are two installation methods of square aluminum gusset ceiling: edge installation and middle installation, depending on the specific situation. It is very important to install the first board, which determines.

The positions and grades of other boards are discussed. The bathroom ceiling can be made of various materials according to different shapes, such as PVC gusset plate, aluminum gusset plate, plastic aluminum plate, light steel keel, etc. And artistic ceilings such as domes can choose soft ones.

Point waterproof board, soft board, plastic aluminum board, or decorate with various colored glass.

Judging from the general ceiling height, most of the family bathrooms in developed countries are short, while the height of many houses and bathrooms in China is the same.

His room, so in order to avoid being empty and cold, the general ceiling height can be designed between 2.2 meters and W642.4 meters. When the area exceeds 8 square meters, a cosmetic cabinet should be installed above the washbasin, away from the water source.

Hang a locker there, or set aside a place for daily dressing.

When installing, the keel should be installed smoothly. Generally speaking, the spacing deviation should be controlled within 65438±0.5cm ... If there is any deviation in size, it should be adjusted first and then inserted in sequence, and it is not allowed to insert forcibly to prevent deformation. The ceiling material of the bathroom should be made of metal, plastic and other materials, because the bathroom is a place for bathing and washing, and the humidity will be very high, and it is easy to deform with wooden materials, which has nothing to do with the waterproof quality.

How to install the bathroom ceiling?

Light steel keel is selected as the wooden keel will deform or corrode after a long time.

When installing suspenders and driving expansion screws, it is different from other places, so you can't drive too deep, because it may damage the waterproof of people upstairs and cause your own blisters.

Compared with the ceiling in the living room and other places, the ceiling in the bathroom mainly depends on the side keel, so the side keel must be firmly glued.

Some novice decorators (mostly) don't install toilet ventilators, they just hang them or press them with something, which is very unsafe, so be careful when installing them.

How to install pvc gusset ceiling

Measure the length and width of your bathroom with a tape measure, go to the building materials market to find a PVC, that is, plastic-steel board merchant, choose your favorite style or color, and tell the owner the length and width of your bathroom, and he will arrange it for you!

Generally speaking, a square meter of PVC board is 25-80 yuan! For example, a board of 30 yuan per square meter with a bathroom area of 5 square meters can be done for 240 yuan! PVC ceiling is beautiful and generous, easy to disassemble and assemble!

How to install integrated ceiling in bathroom

In the past, the treatment of the ceiling in the bathroom was very simple. Generally, no special treatment was done, but a light bulb was installed for lighting. However, with the development of the times, the requirements and design of bathroom ceiling are more and more novel and beautiful, and the materials and installation methods available are also diverse. Its lighting is no longer the only function. Now most people will install the integrated ceiling in the bathroom, so how to install the integrated ceiling? Let's share the installation skills of integrated ceiling.

First, prepare the raw materials for the ceiling.

In order to facilitate the installation of new electrical modules, when aluminum gusset ceiling is selected, its dimensions can generally be 300mm×300mm and 600 mm× 600 mm ..

Second, install the ceiling

First, pull a horizontal line at the place where smallpox is to be installed and hang a light steel keel;

Fix the special triangular card code on the triangular keel and fix it according to the specifications of the installed square plate (the triangular keel only needs to be used in one direction, not in the horizontal direction);

After the keel is installed, directly press the aluminum gusset ceiling into the triangular joint. When installing the aluminum gusset plate, pay attention to insert the triangular bone seam in the direction with a small pit, and do not fold the edge in the pit. A little force can achieve a dense and seamless effect.

Third, select the electrical module.

According to the needs of different functional areas of bathroom space and your own preferences, you can choose electrical modules at will, which can be carried out in decoration materials market or home appliance stores such as Gome and Suning. The heating module can be installed above the bathing area, the ventilation module can be installed above the toilet, the lighting module can be installed in the center of the bathroom, the spotlight module can be installed above the washbasin and toilet mirror, and the MP3 audio module can be installed for people who pay attention to emotional appeal.

Illustration of how to install ceiling lamp in bathroom.

Ceiling lamp installation in the bathroom: large lamps, exhaust fans and other things should be fixed by keels alone, not directly on the aluminum gusset plate, otherwise the aluminum gusset plate will easily fall off, which will have certain safety hazards and affect the appearance. At the same time, the position of Yuba and others should be reserved. , and also reserved the inspection port. In home decoration, most people don't like to set manholes on the ceiling, which affects the appearance. Once the pipeline equipment in the ceiling breaks down, it is impossible to find out which part and why it breaks down, let alone to carry out maintenance. Therefore, it is best to set manholes on the ceiling for laying pipelines, which can be set in a hidden and easy-to-check position, and manholes should be artistically treated. In this way, some parts that are prone to defects will be properly handled. During the whole installation process, the installation should be carried out in strict accordance with the above methods to avoid regret caused by omission.

How to install ceiling lamp in kitchen and bathroom of suspended ceiling

You just need to buy the lamp and give it to the ceiling installer, but you may have to pay the store for outsourcing the lamp. If you bought the lamp at the place where you bought the ceiling, you don't have to consider this problem.

Which step is carried out in the decoration process of kitchen and bathroom ceiling?

It depends.

If the requirements are higher than those after installation, good sealing performance can be guaranteed. But also saves materials.

No, it's a carpenter's business. The operation is very simple.

Generally speaking, the keel is fixed on the cabinet.

But installing cabinets requires punching holes in the wall. As long as the latex wall is not wiped with water, it will be clean with a feather duster.