Walls with beams can be removed.

1. To demolish a wall with a beam, we must first look at the frame structure of the beam. There will be a drawing with obvious marks on it during construction.

2. If it is a load-bearing beam, the lower wall is optional to be removed, so the beam wall on the roof needs special care, otherwise the house will easily collapse.

First of all, please note:

1. The first thing you should pay attention to is to inform the property so that they have a certain understanding of the basic situation.

2. When dismantling the wall with beams, the most important thing to pay attention to is the design of the original drawings. If the wall with beams is demolished at will, it is likely to have an accident, and the house will not be able to live normally in the later period, which is not worth the candle.

3. It should also be noted that the wall with beams should be demolished, and relevant treatment should be done after the wall is demolished, and the wall should be repaired.

4. If the low wall next to the balcony is removed, the balcony will fall or the gravity of the balcony will drop.

5. It is suggested that you can find a professional master to dismantle the wall with beams, because both the wall demolition and the later repair work have certain technical content. If it is not handled properly, it will have a great impact on the normal life in the later period. In serious cases, unexpected consequences may occur.

6. Dismantle the wall with beams, and at the same time pay attention to prepare relevant tools in advance. I suggest you demolish it from Monday to Friday, so the impact on the community will not be too great.

Beams are divided into load-bearing beams and ordinary beams. The wall under the load-bearing beam can be removed.

Nowadays, most high-rise buildings are "frame structures". Frame structure, that is, plates transfer gravity to beams, beams transfer gravity to columns, columns transfer gravity to foundations, and foundations transfer all gravity to foundations. The beam of each floor must be designed to bear the full weight of the floor (the wall weight of the floor, the floor weight of the floor, and all the live loads of the floor).

legal ground

Article 5 of the Measures for the Administration of Residential Interior Decoration.

The following acts are prohibited in residential interior decoration activities:

(a) without the consent of the original design unit or the design unit with corresponding qualification grade, changing the main body and load-bearing structure of the building without authorization;

(2) Changing rooms or balconies without waterproof requirements into bathrooms and kitchens;

(3) expanding the original size of doors and windows of the load-bearing wall and removing the brick-concrete wall connected with the balcony;

(four) damage to the original energy-saving facilities of the house, reducing the energy-saving effect;

(five) other acts that affect the safety of building structure and use.

The term "building subject" as mentioned in these Measures refers to the structural structure of building entities, including roofs, floors, beams, columns, supports, walls, connecting nodes and foundations.

The term "load-bearing structure" as mentioned in these Measures refers to the main structural members and their connecting nodes that directly transfer their own weight and various external forces to the foundation, including load-bearing walls, uprights, columns, frame columns, piers, floors, beams, roof trusses and suspension cables.