How does the owner inspect the house when handing over the house?

When handing over the house, the owner's inspection method is to check the external situation of the house, check the floor and roof, check the security door, check the indoor doors and windows and balcony, check the walls and floors, check the ceiling of the kitchen and bathroom, and so on.

1, check the outside of the house.

It is very important to check the external conditions of the house. Check whether the external wall tiles are firmly installed and whether the unit door is in good condition. In addition, pay attention to check whether the public area is available in good condition. If there is no problem, open the door for internal acceptance.

Step 2 check the floor and roof

Check whether the floor height is consistent with the contract. It is best to record the number of water meters, electricity meters, building height, toilet pit distance, bathtub length and width, shower room size, ceiling height, etc. In addition, check the roof to see if there is any tilt problem. You can take four or five points on the roof at will and then measure them with a box ruler. If the values are consistent, it means that there is no tilt problem.

Step 3 check the safety door

The inspection of security doors is also essential in house inspection. We should carefully check whether there are cracks, deformation and other problems, then look at the tightness of the door, whether the switch of the door lock is flexible, and also check whether the doorbell can be used normally and whether the cat's eye is clear and loose.

4. Check indoor doors and windows and balconies.

Be sure to carefully check whether there are cracks in indoor doors and windows, balconies, etc. , and pay attention to check whether the paint is completely brushed. When checking whether the doors and windows are well sealed, you can put a piece of paper on the sealing point, then close the door, hold the paper down and pull it out. After multi-point test, see if the sealing strip pressure is uniform. At the same time, we should also check whether the screen window and sash on the sliding window are flexible and collide with each other.

5. Check the walls and floors.

Check whether the wall and ground are flat, and whether there is water seepage, cracking and hollowing. If you have the above problems, you should communicate with the property personnel as soon as possible to carry out the renovation, and then check after the renovation is completed. Only when there is no problem can the decoration be carried out, otherwise there may be problems such as floor perforation.

6. Check the ceiling in the kitchen and bathroom.

If you buy a hardcover room, you must check the ceiling of the kitchen and bathroom to see if it is installed firmly. In addition, you should pay attention to whether there is empty drum phenomenon in wall tiles and floor tiles. You can judge by tapping the surface with a small hammer and listening to the sound.