What are the legal requirements for opening holes in load-bearing beams?

Load-bearing beams are very important in buildings, which have great influence on the stability of the whole building. Therefore, individuals are not allowed to drill holes or dismantle load-bearing beams at will, otherwise it will bring security risks. So what are the legal provisions for the opening of load-bearing beams and what are the precautions for the construction of load-bearing walls? Do you know that?/You know what? Now let's have a look.

1. What are the legal requirements for opening holes in load-bearing beams?

Bearing beam cannot be drilled, otherwise it will easily affect the stability of the whole building. If it is necessary to drill holes, it must be reported to the property, and the hole can be drilled only after obtaining the property permission, but it should also be noted that the hole diameter on the bearing beam needs to be within100 mm.

Second, the load-bearing wall construction should pay attention to?

1, during the construction of the load-bearing wall, concrete needs to be used for pouring, so that the manufactured beams and columns will have strong bearing capacity. Then it is necessary to ensure its consistency, so as to make the overall effect look good, otherwise, if the beam or column is hung in the middle, it will make the load-bearing wall look uncomfortable and affect its use.

2. If it is necessary to change the beam of the load-bearing wall, it is necessary to report it and get permission before starting construction, otherwise the consequences will be very serious. For example, the demolition of load-bearing walls should be approved by the state planning department and made by regular developers. Then the equipment of the decoration company should be approved by the relevant departments.

It is not easy to change the load-bearing beam into a cross beam. During this period, the security risks are relatively large. When the equipment support is installed indoors, waterproof work needs to be done on the roof. If there is no bracket, put rubber heat on the heat ring to ensure normal use in the later period and avoid big trouble.

What are the legal provisions for the opening of load-bearing beams and what are the precautions for the construction of load-bearing walls? Let me introduce it here first. You got it? Drilling holes in the load-bearing beam is very troublesome. You can't make holes at will according to your personal thoughts, you must obtain the permission of the relevant departments.