What are the requirements for installing public charging piles?

How to apply for public charging piles requires customer identification materials; Customer identification materials; Proof of the property right of the electricity address; For projects that occupy public places in residential areas, such as parking lots, it is also necessary to provide a consent letter issued by the owners' Committee or the property to agree to build charging infrastructure. If the user only rents the parking space, he shall also provide the consent materials of the parking space owner.

What are the requirements for installing public charging piles?

1. The site meets the access conditions stipulated by relevant departments such as electric power and communication.

2. There is power supply and space on site to meet the requirements of equipment operation and maintenance, and corresponding interface positions are reserved.

3. There is no high-voltage line corridor around the site, and a sufficient safe distance is kept from residential areas and important buildings.

4. The site area is not less than 30m2 and not less than 10 m2, including not less than 5 fixed parking spaces;

5. Sufficient power supply capacity (single power ≥50kw).

6.tn-s 380v AC or single-phase 220 V AC power distribution system;

7. Reliable grounding device;

8. There are lightning protection measures that meet the relevant national standards;

9. There are good drainage facilities, and the depth of the drainage ditch is not less than 0.7m.

10. Necessary fire fighting equipment, fire extinguishing equipment and emergency broadcasting and communication facilities.

1 1. When building a special parking lot, it should also meet the requirements of the Planning Guidelines for Urban Public Parking Lots.

12. Provide relevant documents and technical support documents such as charging service network interface protocol according to user's requirements.

13. Other conditions to be met. (e.g. emergency plan under special vehicle use environment and special weather conditions, etc.). ).

Installation cost of new energy vehicle charging pile

After the average car owner buys a new energy car, some car manufacturers will give a new energy car charging pile for family use. At this time, the owner needs to install it. In this case, it will cost about five or six hundred yuan to install a new energy vehicle charging pile. In short, the installation fee will not exceed 1000 yuan.

If the owner does not give a new energy vehicle charging pile when buying a new energy vehicle, the owner needs to buy a new energy charging pile himself and then install it. If the owner buys a household charging pile, the installation fee for driving the charging pile is about 2000 ~ 5000 RMB. If the owner buys a DC fast charging pile, the cost of the charging pile may be around 1.55 million RMB, plus the installation fee, it often needs 1.55 million RMB.

How to use public charging piles?

1, scan code to log in

There is a two-dimensional code on the equipment of the charging station of the public electric vehicle, and users can scan the code with their mobile phones to log in.

2. Equipment connection

Plug the charging cable into the connection port of the electric vehicle and prepare for charging.

Step 3 start charging

After the charging cable of the device is plugged in, select scan code to charge on the mobile phone, and you can start charging.

Step 4 stop charging

After the charging work is completed, select the mobile phone to stop charging, and remember to unplug the charging cable.

Advantages of public electric vehicles

1, various charging settings

There are various charging methods for public electric vehicle charging stations, which can be selected at will, such as automatic charging, charging by quantity, charging by quantity, charging by time, etc. Basic information such as charging mode, time, power and screen can be displayed in real time.

2. It is convenient to check the running status.

On the screen of the bus charging station, there is a running status indicator bar. Similar to the rules of traffic lights, the yellow light indicates that the charging pile is in standby state; The green light indicates that the charging pile is charging; The red light indicates the end of charging. In addition, there are special circumstances. The flashing red light indicates that the charging pile is abnormal.

3, intelligent control billing

The controller attached to the public electric vehicle charging station can get the information of the electric energy meter by setting, and complete the charging and charging process.

Generally speaking, the use process of public electric vehicle charging station is simple and easy to operate, so it is not a problem to take a mobile phone when going out.