How to write the safety emergency plan?

How to write the emergency plan for production safety?

Accident emergency rescue plan

I. General principles

L, all employees of our company must seriously study and implement the policy of safety in production, abide by the relevant national laws and regulations on safety in production, and conscientiously implement the regulations of our company on safety in production and fire management to ensure the personal safety and physical and mental health of employees in the production process. Ensure the safety of state property and collective property.

2, do a good job in production safety and fire safety work must be based on prevention. Safety in production and fire safety must be talked about every year, every month and every day. Make all employees fully realize the importance of doing a good job in safety production and fire safety, fully realize the importance of doing a good job in prevention, eliminate all kinds of safety hazards, and nip all kinds of accidents in the bud! Strengthen the education and training of workers' safety production, and form a good situation that everyone knows safety knowledge and everyone is in charge of safety.

3. In order to deal with all kinds of sudden major accidents, it is necessary to formulate practical spiritual principles of emergency response and rescue plans, and deal with these accidents in an orderly manner, so as not to be in a hurry and delay the fighters. Therefore, this emergency rescue plan for major accidents is specially formulated.

4. All employees of our company are required to be familiar with the specific requirements of this rescue plan, and everyone can command flexibly at the scene of the accident and properly handle all kinds of accidents according to the requirements of the plan.

Second, the general provisions

1. When a major accident occurs, the top leader at the scene of the accident (referring to the squad leader or above of the accident team) is the on-site commander responsible for handling the accident.

2. The on-site commander-in-chief must be cool-headed, handle things resolutely and decisively, and immediately organize employees to carry out rescue work in accordance with the spirit of the rescue plan. Don't drag your feet and delay the best time for rescue.

3. On-site commander-in-chief should, based on the principle of "rescue first, then report", first organize on-site employees to carry out rescue work, and report to the company leader immediately after the situation is controlled.

4. When the site situation is out of control and the company leader cannot be contacted at the same time, the site commander-in-chief has the right to deal with all kinds of emergencies:

(1) In case of fire, you should immediately ask 1 19 for help.

(2) In case of personal injury or death, if you can't find a car for a while, you should immediately call the emergency center 120 for rescue.

5. In the event of an accident, all on-site employees should take an active part in the rescue work under the leadership of the on-site commander-in-chief, and never retreat, become deserters, or refuse to obey the leadership and delay the fighter plane. In the event of such incidents, the company will be held accountable and dealt with seriously.

Third, the fire accident emergency rescue plan

1. After a sudden fire accident, the monitor of the accident team shall immediately organize the employees of the team to put into fire fighting work, and shall not delay the fire fighting work for any reason.

2. After a sudden fire accident, the non-accident team operators should, depending on the severity of the fire at that time, send some personnel to assist in the fire fighting under the unified dispatch of the on-site fire fighting commander, or take emergency power-off measures, and the police station has personnel to assist in the fire fighting.

Four, personal injury accident emergency rescue plan

L, sudden major personal injury accidents, shift monitor and on-site operators should take decisive measures, immediately stop or power off, and quickly rescue victims from mechanical equipment or electric shock parts.

2. If the victim loses a lot of blood, the on-site commander should immediately organize employees to temporarily bandage and stop bleeding.

3. If the victim's breathing and heartbeat stop, the victim should be immediately moved to an open area for artificial respiration and cardiac resuscitation, without delay for half a minute.

4. At this point, the on-site commander should race against time, make a decisive decision and urgently ask 120 emergency center for help.

5. The on-site commander shall report to the company leader in time.

6. When a general personal injury accident occurs, the on-site commander-in-chief should immediately report to the company leader and find a car in time to send the victim to the hospital for treatment.

7. When dealing with personal injury accidents, on-site commanders should deal with them immediately on the principle of fast and steady, and don't delay time! Never delay the best opportunity to treat the victims! Time is life!

Five, equipment accident emergency rescue plan

1, sudden major equipment accident, the team monitor should take prompt measures to stop power supply and prevent the accident from expanding.

2. If personal injury accidents occur due to equipment accidents, save people immediately. After the victim is rescued, the procedure of Emergency Treatment and Rescue Plan for Personal Injury Accident should be started immediately, and it should be handled quickly, and then the equipment accident should be handled. ......

How to write an emergency plan

There are many emergency plans for student activities on the Internet. Just find and modify them. Give you a reference.

In order to prevent accidents on the way out for students, ensure the activities are carried out in an orderly, smooth and safe manner, and carry out rescue work as soon as possible, this safety emergency plan is specially formulated:

I. Guiding ideology

Guided by the Regulations on School Safety Work, we should conscientiously implement various safety measures, educate students to abide by various safety laws and regulations, cultivate and guide students to have certain self-care ability, and make the activities both safe and interesting.

Second, the leading group (safety accident handling leading group)

Team leader: Zhou

Deputy Head: Jiao Mingxiu, Du Xiang, Zhao Jieyu

Team members: Jin Bai, Guangdong Liu and Xie Qiang.

Responsibilities: Make plans for this activity, lead the activity to go smoothly, and handle all accidents during the activity. Accidents with serious consequences should be reported to the District Education Bureau immediately.

On-site safety team:

Team leader: Du Xiang Team member: Xie Qiang Guangdong Liu.

Student management section:

Team leader: Zhao Jieyu. Team members: Wang Ting and the class teacher.

Medical logistics group:

Team leader: Zhou Lei. Team member: Jin Bai.

Third, the specific emergency plan:

1. Establish a safety leading group, with division of responsibilities (the class teacher is responsible for the safety of each class). If there are any accidents that the team leader can't handle, he should immediately report to the general affairs director and the principal and do something within his power, such as stopping bleeding, stabilizing students' emotions, contacting vehicles and hospitals.

2. If a student is slightly injured, such as being injured or worn out, apply or paste it with red syrup, purple syrup, band-aid and safflower oil.

3. Traffic accident: the team leader and deputy team leader are responsible for overall coordination, organizing alarm, dialing "120" and "1 10" quickly and reporting related matters, so as to carry out rescue and medical treatment as soon as possible. The team members carry out on-site protection and temporary rescue, and the class teacher controls the chaotic scenes of students (to prevent students from watching) and the occurrence of secondary accidents; The class teacher should contact the parents of students in time, strengthen communication with parents and stabilize their emotions.

4. Accidental injury: When students have injuries such as falls and drowning during activities, the team leader will always coordinate and report relevant matters; The deputy head is responsible for organizing on-site rescue, alarm, preliminary medical work of the medical team and severe hospitalization; At the same time, control the chaotic scenes of students (to prevent students from watching) and the occurrence of secondary accidents; Logistics personnel assist medical personnel in on-site medical treatment and are responsible for the implementation of logistics support.

5. Food poisoning incident: the group leader and deputy group leader call the emergency center "120" or "1 10" for help and send the poisoned person to the nearest local hospital as soon as possible. Team members are responsible for accompanying and stabilizing the emotions of teachers and students, and all kinds of personnel are required not to spread news in their own names, so as not to cause unnecessary confusion. According to the requirements of the leaders, report to the higher authorities and the municipal epidemic prevention department respectively.

6. Fire accident: quickly organize students to evacuate the fire. The team leader and deputy team leader should call "1 19" to organize personnel to escape before the fire truck arrives, and students are not allowed to participate in the fire fighting.

7. Line up according to the prescribed route and go back to school. Go back to school in order of grades. The head teacher and classroom teacher are safety inspectors; The students in each class are divided into two groups, and each group chooses a safety inspector to be responsible for the safety of the group.

8. Before departure, each class teacher and superintendent will call the roll, and then call the roll after arriving at the destination. When they come back, they will queue up for roll call and then go back to school. Do it: go for a spring outing happily and go back to school safely.

Four. Tasks and requirements of relevant responsible persons:

(a) members of the leading group:

1. All participants must be trained, clear about their tasks, responsibilities and energy, and participate in the whole process of the activity from beginning to end.

2. Team members always bring their own mobile phones and stand by to ensure the smooth flow of information. Obey unified deployment and command.

3. When the advance team leads the team, it is necessary to carefully check the surrounding environment of the road and send people to stay in the dangerous area to remind everyone to pay attention to safety.

When students cross the road, team members should direct traffic in the middle of the road to ensure that all students cross the road safely.

(2) the class teacher and class teacher:

1. All participants must be trained, clear about their tasks, responsibilities and energy, and participate in the whole process of the activity from beginning to end. Take care of students all the time according to the assigned tasks.

2. The class teacher should do all kinds of education listed in the precautions for students in advance, and at the same time do a good job in all aspects of organization.

3. Organize and take good care of students, ensure the safety of students, and ensure that the number of people counted (mastered) is consistent when going, returning and * * *. ......

How to write the emergency plan system in the emergency plan for production safety accidents and disasters?

Emergency plan for production safety accidents of small and medium-sized enterprises

(Guidance reference sample)

1, general provisions

The purpose of compiling 1. 1

Briefly describe the purpose and function of emergency plan preparation.

For example, in order to prevent production safety accidents, standardize the emergency management and emergency response procedures of production safety accidents in enterprises, control and deal with accidents quickly and effectively, and minimize casualties, property losses, environmental damage and social impact, this emergency plan is specially formulated.

1.2 compilation basis

Briefly describe the laws, regulations and rules on which the emergency plan is based, as well as relevant industry management regulations, technical specifications and standards.

Such as: (1) Law of People's Republic of China (PRC) on Work Safety.

(2) People's Republic of China (PRC) Fire Protection Law

(3) Regulations on Supervision and Administration of Construction Project Safety Production

(4) Regulations of Beijing Municipality on Work Safety

And other laws, regulations and relevant provisions.

1.3 Scope of application

Explain the scope of application and accident types of the enterprise's emergency plan.

For example, this emergency plan is applicable to the fire accident, electric shock accident and object strike accident of (company name).

1.4 emergency plan system

Explain the composition of the emergency plan system of this unit.

For example, this emergency plan system includes: fire accident special plan, electric shock accident site disposal plan, and object strike accident disposal plan.

1.5 emergency work principles

Explain the principles of emergency work in this unit, and the content should be concise, clear and specific.

Such as: safety first, prevention first; People-oriented, unified command, coordination and cooperation, based on self-help; Quick response, enterprise self-help and professional rescue.

2. Risk analysis

2. 1 Enterprise Overview

Mainly including: enterprise address, geographical location and surrounding conditions, number of employees, affiliation, main raw materials, main products, safety production management system, safety facilities, etc. Attach a plan description as much as possible.

How to write the emergency plan for activities?

It is necessary to indicate the time and place, the activity process, and most importantly, the number of participants and the activity budget. Matters needing attention should be decided according to the actual situation. The safety plan will generally point out the hidden dangers that may occur during the activity. Location of safety exits, no fire fighting equipment, etc. It should be marked indoors. If it is outdoors, it should indicate the vehicle layout, the number of people in a vehicle, the driving route of the vehicle, the terrain of the roadside safety hazard destination and the possible disaster solution.

Is there a model of emergency rescue plan for production safety accidents?

Go to the website of Chinese text library, fill in the words "emergency rescue of production safety accidents" in "literature search", and then click "Go", and relevant plans will be found in the search results. (Search "Chinese Text Library" on Baidu to find the station)

How to write an emergency plan about safety management?

The nature and scale of production, storage and operation of enterprises are different. What kind of plan should be prepared to meet the basic requirements of emergency? What is the basic content of the emergency plan? How many functions does this plan have? How to carry out emergency preparation, emergency response and emergency recovery? This * * * superficial discussion is for your reference.

Before making an emergency plan, it is necessary to first identify and evaluate the production situation of the enterprise. Risk factors refer to factors that can cause human casualties and material losses. Harmful factors refer to factors that can affect people's health, cause diseases or damage things. Usually there is no strict distinction between the two. Identification of dangerous and harmful factors is the premise and basis for enterprises to prepare emergency rescue plans. Identify the existence and characteristics of hazard sources, find out the substances, systems, processes and characteristics that lead to accident consequences, and evaluate possible accident consequences.

I. Classification of hazardous and harmful factors

(a) according to the cause of the accident is divided into six categories:

1, physical hazards (equipment defects, electrical hazards, noise, vibration, electromagnetic radiation, naked flame, high temperature, parabola, dust, working environment, etc.). )

2. Chemical hazards (inflammable and explosive substances, spontaneous combustion, toxic and corrosive substances) 3. Biological hazards: (pathogenic microorganisms, animals, plants and infectious diseases).

4. Physical and psychological risk factors (psychological abnormality, health abnormality, overload, functional defect, operation prohibition)

5. Behavioral hazards (command, operation and monitoring errors)

6. Other dangerous and harmful factors.

(two) according to the cause of the accident, harmful substances, the way of injury:

1, object strike 2, vehicle injury 3, mechanical injury 4, lifting injury 5, electric shock 6, drowning 7, burning 8, fire 9, falling from a height 10, collapse1,roof caving 12, and flooding/kloc.

Second, the risk assessment

(A) the basic situation of the enterprise

Site, geology, topography, meteorological conditions, surrounding environment, general layout of buildings, functional zoning, road distribution, facilities for hazardous and harmful substances and power equipment;

In the production process, key parts such as high temperature, high pressure, corrosion, vibration, control, operation, maintenance, faults and abnormal situations; Electrical equipment, aerial work equipment, special single equipment and pressure vessels;

Working environment, toxic substances, noise, vibration, high temperature, low temperature, radiation, dust and other harmful factors and the situation of working parts;

Enterprise safety management organization, safety production management system, safety operation procedures, special operations personnel training, daily safety management.

(b) Analysis of the consequences of the leakage and diffusion of hazardous chemicals

1, to know the main leaking equipment and leakage situation. 2. Analyze the causes of leakage. Such as: design reasons, equipment reasons, management reasons, human errors; 3. Analyze the pre-existing consequences. Flammable gas leakage, toxic gas leakage, liquid leakage, diffusion and the scope after leakage.

(3) Consequences of the fire of dangerous chemicals

1, burning property, building loss 2, explosion 3, death, injury 4, gas poisoning

Three. Vulnerability analysis

Vulnerability analysis is to determine where the enterprise will be damaged in the event of a dangerous accident.

(1) Processes, equipment and major hazards seriously affected by accidents and disasters.

(two) the number and type of population expected to be located in vulnerable areas. Mainly residential areas, schools, hospitals, office buildings, shopping malls and so on.

(3) possible property losses. There are mainly infrastructure, power distribution stations and buildings.

(4) Possible environmental impact. Geographical conditions, meteorological conditions and surrounding environment of the enterprise.

Four, emergency resource analysis and emergency capacity assessment

Emergency resources mainly refer to urban emergency rescue forces, such as public security, army, fire fighting, medical rescue, labor, environmental protection, safety supervision and rescue experts, necessary equipment and materials, personal protective equipment, monitoring and testing equipment, emergency power supply equipment, heavy lifting equipment, communication, vehicle equipment and enterprises that should be equipped by water, electricity, gas and heat management departments.

Emergency capacity assessment is mainly used to assess the preparation of resources and the ability to engage in emergency activities, ensure the effectiveness of emergency rescue and improve the emergency level of enterprises. Enterprise emergency assessment can be combined with emergency resource preparation.

Verb (abbreviation of verb) Preparation of emergency plan

The preparation of emergency plan must consider the present situation and needs of enterprises, collect and refer to the existing emergency information about accident risk analysis results, so as to minimize work links. A complete emergency plan should include the following six items:

(1) policies and principles

No matter what level or type of emergency rescue system, first of all, ......

How to write an emergency plan

In order to effectively deal with sudden environmental incidents, improve the ability of enterprises and institutions to deal with sudden environmental incidents, minimize the losses caused by sudden environmental incidents to people, property and the environment, maximize the protection of people's lives and property safety and environmental safety, and maintain social stability.

2 compilation basis

According to the provisions of People's Republic of China (PRC) Environmental Protection Law and People's Republic of China (PRC) Water Pollution Prevention Law, enterprises and institutions that may have major pollution accidents, may cause or may cause water pollution accidents shall take measures to strengthen prevention, and formulate this plan in accordance with the National Emergency Plan for Sudden Environmental Accidents and other relevant laws and regulations.

3 Scope of application

It is applicable to sudden environmental pollution incidents caused by foreseeable environmental pollution and other accidents in this enterprise.

4. Organization, responsibility and authority

4. 1 organization

The emergency institutions of enterprises and institutions are composed of leading institutions, daily management institutions and on-site disposal institutions, and the departments and personnel of each institution are defined, and the construction of emergency teams for sudden environmental incidents is defined, with a block diagram attached.

4.2 Responsibility and authority

Clarify the responsibilities and authorities of relevant institutions and responsible persons. Especially in the case of sudden environmental events, the authority to make decisions such as emergency shutdown and temporary shutdown of production lines must be clear.

5 key points, facilities and measures to prevent sudden environmental pollution incidents.

5. 1 prevention points

Identify the targets, posts and pollution control facilities of enterprises and institutions that are prone to accidents in production, storage or transportation, and attach specific orientation maps.

5.2 Preventive facilities

Identify facilities and equipment (such as emergency pool for water pollution accidents, cofferdam for fuel oil and sulfuric acid storage tanks, etc.). ) can control and slow down pollution, and match the focus of prevention when an accident occurs.

5.3 Preventive measures

Clarify the content, organization and requirements of specific measures for on-site monitoring and on-site emergency response of sudden environmental incidents.

6. Emergency response

6. 1. Response procedures and contents

6. 1. 1 Upon receiving the released emergency warning information or emergencies, the emergency leading group of the company immediately started the corresponding emergency plan, and the members of the emergency working group quickly assembled and rushed to the scene of the accident. At the same time, on-site personnel should do a good job of pre-treatment and rescue in time according to the situation to prevent the situation from expanding. (* Clarify the departments, channels, time limits and procedures of information reporting when environmental emergencies occur, and attach the work flow chart. )

6. 1.2 specify the reporting method (telephone and text) and reporting content requirements (time, place, pollutant type, quantity or concentration, severity and harm, possible consequences and scope of influence) of environmental emergencies.

6. 1.3 Start corresponding emergency measures.

6.2. End of the state of emergency

Clarify the conditions, procedures, decision-making bodies, evaluation procedures and requirements of the emergency process.

Deal with the aftermath

7. 1 specifies the working procedures of pollutant elimination, disposal and site cleaning.

7.2 Clarify the organization, cooperation and implementation of pollution damage assessment and compensation.

8. Protection

8. 1 capital guarantee

The source of emergency funds must be clear.

8.2 Communication and information guarantee

Clarify the communication mode, contact information and address book of each member of the enterprise emergency agency and the local emergency linkage department.

8.3 Material and equipment support

8.3. 1. There should be protective equipment to meet the needs of emergency personnel on site.

8.3.2. There should be a material reserve, and various substances for eliminating pollutants should be reserved according to the pollution characteristics of the unit, so as to meet the emergency needs in terms of quantity, location distribution and use function.

8.3.3. There should be mechanical equipment (such as large and small excavators, hoists, etc.) used for on-site emergency treatment or fixed cooperation and contact information with external support.

8.3.4. Some safeguard measures shall be determined by enterprises and institutions according to their own conditions.

9. Publicity, training and exercises

9. 1 Staff publicity and education

Announce the emergency plan and alarm telephone number of enterprises and institutions for sudden environmental incidents to employees. Widely publicize emergency laws and regulations and common sense such as prevention, hedging, self-help, mutual rescue and disaster reduction. Enhance employees' awareness of prevention and related psychological preparation, and improve employees' preventive ability.

9.2 Training

Clarify the requirements of leaders of emergency agencies such as daily management and on-site handling, and the pre-job and routine training of enterprise technicians and workers.

9.3 exercise

Define the content and frequency of annual exercises (not less than once a year). ...

How to write the emergency plan for enterprise safety production accidents?

Emergency plan for production safety accidents of small and medium-sized enterprises

(Guidance reference sample)

1, general provisions

The purpose of compiling 1. 1

Briefly describe the purpose and function of emergency plan preparation.

For example, in order to prevent production safety accidents, standardize the emergency management and emergency response procedures of production safety accidents in enterprises, control and deal with accidents quickly and effectively, and minimize casualties, property losses, environmental damage and social impact, this emergency plan is specially formulated.

1.2 compilation basis

Briefly describe the laws, regulations and rules on which the emergency plan is based, as well as relevant industry management regulations, technical specifications and standards.

Such as: (1) Law of People's Republic of China (PRC) on Work Safety.

(2) People's Republic of China (PRC) Fire Protection Law

(3) Regulations on Supervision and Administration of Construction Project Safety Production

(4) Regulations of Beijing Municipality on Work Safety

And other laws, regulations and relevant provisions.

1.3 Scope of application

Explain the scope of application and accident types of the enterprise's emergency plan.

For example, this emergency plan is applicable to the fire accident, electric shock accident and object strike accident of (company name).

1.4 emergency plan system

Explain the composition of the emergency plan system of this unit.

For example, this emergency plan system includes: fire accident special plan, electric shock accident site disposal plan, and object strike accident disposal plan.

1.5 emergency work principles

Explain the principles of emergency work in this unit, and the content should be concise, clear and specific.

Such as: safety first, prevention first; People-oriented, unified command, coordination and cooperation, based on self-help; Quick response, enterprise self-help and professional rescue.

2. Risk analysis

2. 1 Enterprise Overview

Mainly including: enterprise address, geographical location and surrounding conditions, number of employees, affiliation, main raw materials, main products, safety production management system, safety facilities, etc. Attach a plan description as much as possible.

For example, a material recycling company.

(1) Enterprise Address: XXX Village, XXX Township, Chaoyang District

(2) Geographical location and surrounding conditions

XXX village is in the southeast, with XXX highway in the west, villagers' houses in the north, villagers' houses in the east and open spaces in the south.

(3) Number of employees: There are 20 employees at present, including 4 managers and safety supervisor 1 person.

(4) Affiliation: Chaoyang XXX Material Recovery Co., Ltd.

(5) Main raw materials: old cartons and wooden cases (for finishing). About 65,438+00,000 cartons and 5,000 wooden cases per month. Unusable waste paper boxes and wooden cases are recycled by the company. The company has set up 2 maintenance points and 4 warehouses, each with an area of 150 square meters.

(6) Setting of fire control facilities

The company has 1 fire pool (10 cubic meter), 2 fire pumps, 2 fire hydrants, 8 fire-fighting equipment 16 dry powder fire extinguishers and 8 carbon dioxide fire extinguishers (depending on the type).

2.2 Hazard sources and risk analysis

Should be based on the nature and characteristics of enterprise production and operation, existing hazards and risk analysis results. And explain the workshop (location) where the hazard source is located and the types of possible accidents.

For example, (1) direct contact of dangerous chemicals with human skin and eyes may cause burns, and leakage may easily lead to poisoning, which in turn may lead to combustion and explosion. There are XXX workshops and dangerous goods warehouses.

(2) Mechanical injury accident, object strike accident, electric shock accident, lifting injury accident and falling accident may occur during processing. Accident workshop, machining workshop, power distribution room, lifting post, etc.

(3) The construction unit may have an object strike accident, an electric shock accident, a falling accident, a mechanical injury accident, a collapse accident, a poisoning suffocation accident, a fire accident and a food poisoning accident. Occurred in the construction site of the temporary electricity part, limb part, mechanical processing part, excavation trench demolition engineering canteen, etc.

(4) Fire accident, food poisoning accident, cooking equipment injury accident, etc. May occur in hotels, restaurants and other crowded places, as well as kitchen stoves, flues, gas cylinders storage and use parts, staple food processing rooms and so on.

For example, a material recycling company.

(65438+ accident site, paper, wooden cases, maintenance points, and 4 warehouses for storing paper and wooden cases.

(2) An electric shock accident may occur in the outdoor distribution box

3, emergency organization, emergency team and responsibilities

3. 1 emergency organization system

Clear the emergency organization form, constitute the unit or personnel, and as far as possible. ......

The emergency plan for production safety accidents is prepared according to GB/T29639-20 13.

1. General provisions.

1. 1 Purpose of emergency rescue plan -3

1.2 compilation basis -3.

1.3 emergency rescue plan area, accident type and grade -3

1.4 emergency plan system -3.

1.5 emergency working principle -3-4.

2. Company risk analysis -4.

2. 1 enterprise profile -4.

2.2 Hazard sources and risk analysis -4-8

3. Organizational structure and responsibilities -8-60.

3. 1 emergency organization system -8.

3.2 Command Organization and Responsibilities -8- 10.

4. Early warning and information reporting -65438.

4. 1 early warning-.

4.2 Information Report-10-

5. Emergency response.

5. 1 response score -65433-65433.

5.2 Response Procedures and Disposal Measures-1 1-65438+

5.3 End of emergency-15.

6. Information disclosure.

7. Post-processing.

8. Safeguards-

8. 1 Communication and information guarantee- ......

How to write the emergency plan for production safety accidents? What is the content?

There is an AQ_T9002-2006 "Guidelines for the Preparation of Emergency Plans for Safety Accidents in Production and Business Units", which is compiled according to its contents, and then reviewed and filed.