Is the house of Suzhou Industrial Park City Garden Phase I a frame structure?

The structural difference lies in the bearing mode. The bearing capacity of brick-concrete structure consists of slab and wall. The weight of cast-in-place concrete floor is transferred to the wall, and the wall is transferred to the foundation. Frame structure consists of floor, beam and column. The floor transmits the force to the beam, then to the column, and then to the foundation. Advantages of brick-concrete frame: First, the space is open, because ...

Your feeling is right, "build a layer of bricks, and then pour a row of frame columns with concrete in the middle of the wall." This is a brick-concrete structure. It is the brick wall that bears the load, not the concrete column you see. This concrete column is a structural column, which does not bear load, but only plays a role in fastening the brick walls together and strengthening the integrity. The concrete grade and steel bar model inside can't meet the load-bearing requirements. ...

It's from Suzhou Industrial Park. The specific address is: several buildings and units of Xinghai Street City Garden in Suzhou Industrial Park. I'm around here. When you buy things online, you can add the address later, not just the one you choose.

The constructional column of frame structure is standardized. When the length of the wall is more than twice the height of the story, or the thickness of 120 (or 100) is more than 3.6m, and the thickness of 180 (or 190) is more than 5m, the separation distance of concrete structural columns shall be increased. Also, it is allowed to do Rachel on beams without constructional columns, which is based on design.

This is an old question. In many websites, especially map websites, Suzhou Industrial Park does not exist at all, and all the places in the park are considered Wuzhong District.

The house on the first floor uses brick-concrete structure and frame structure, saving money! I used filler in the middle, not ceramsite blocks! Then the outer layer is hung with steel mesh, covering an area of about 80 square meters! Design ring beams up and down! The ring beam is 20*20! Please give me a structural diagram! Thanks ~!