The tap water pressure at the top is relatively small. How to solve it?

If the floor doesn't have the same problem, you can be sure that there is a problem with the pipeline on your side! If the property is not handled, you can only contact the pipeline repair master personally for maintenance! Besides, the pipes are crushed, so remember to repair them yourself.

It is true that many high-rise residential buildings have little problem with tap water. If you only mentioned "sometimes small" in your question, it is probably because of the peak water consumption. For small water pressure, the following investigations can be made:

Tap water in high-rise residential buildings is generally pressurized twice, and the water output may be small during the peak period of water use. First, make sure that the home entrance valve is opened to the maximum. If not, turn up the volume. Secondly, stagger the peak period appropriately.

Hello, I live in a high-rise house. During the rush hour, every household in the United States is using water, and the water pressure will definitely decrease, which is normal. If it is too small, it will affect the use. An electric booster pump can be installed on the main water supply pipe.

If there is a problem with the pressurization process, just look for the property directly. If the water concentration in high-rise buildings is too high, resulting in little tap water, I suggest you decorate a water tank or bucket suitable for your home.

If you live on the top floor, just under the water tank, your water pressure will naturally be very low, so if you want to have enough water at this time, there is no other way but to add your own pump.

The reason of insufficient water pressure may be that the variable frequency pump is not stable when working. If the water pressure is unstable, the water temperature will rise and fall. The booster pump can't solve the problem at this time. If you want to keep the water temperature constant, you need to install a flow regulator or replace a gas water heater with constant temperature and stability.

If the pressure of a unit is low, you can consult with the property to find out what causes it. In places with low pressure in your home, you can see if there is any congestion. If not, installing a booster pump can solve the problem. Adding a booster pump to the home is really impossible to make the home reach enough pressure, but in this case, some properties are not allowed to use because it will affect the pressure of other users.