What kind of glue is used to install the ground lock for non-perforated parking spaces?

Non-perforated parking space locks are installed with ab glue.

Ab glue can be used to stick the ground lock of parking space without punching holes. Ab glue belongs to epoxy glue, which is hard after curing. Not suitable for pasting soft materials such as wood and plastic, but suitable for pasting hard materials such as metal, stone, glass and ceramics. Ab glue can stick to wood. Usually carpenters often use ab glue.

Ab glue is another name for two-liquid mixed hardening glue. One liquid is glue, and the other is hardener. Only when the two liquids are compatible can they be used. Ab glue wood is useful. Ab glue is another name for two-liquid mixed hardening glue. One liquid is glue, and the other is hardener. Only when two liquids are mixed can they become hard.

The parking lock uses the main function.

Parking lock is a kind of parking lock that can be connected and controlled with charging piles, computers, mobile phone apps, WeChat applets and other devices. Its function is to prevent others from occupying their own parking spaces, so that their cars can be parked at any time, and at the same time, they can rent out parking spaces when they are not using parking locks.

The research and development of this kind of parking lock is to solve the problem that ordinary remote control parking locks can't enjoy parking spaces. Anti-collision design, positive and negative 180 anti-collision design, the ground lock will actively lower the swing arm when the car collides, and will automatically rise and jam the car chassis after 3 to 5 seconds, thus reducing the damage of the ground lock to some extent. Waterproof design, 24-hour waterproof design, 24-hour immersion test for normal lifting in low-lying parking spaces.

The use of precision waterproof apron can effectively prevent the daily lifting of the ground lock in the open parking space from being damaged by rain. Compressive design, surface shell, integrated die-casting, 0.3mm cold-rolled steel plate, and reinforced steel bars on the surface can be effectively rolled repeatedly on a 5-ton car without damage. If the shell is crushed within one year, we will bear all the damage.