Job Recruitment Website - Property management company - Does the property have the right to request the style of balcony seal?

Does the property have the right to request the style of balcony seal?

Does the property have the right to request balcony style?

Property has no right to request the style of balcony, but property can help relevant departments to strengthen the management of building cornice modeling. Generally speaking, there are uniform requirements for the shape of building eaves. However, if the scheme given by the property is unreasonable, such as safety and ventilation, you can negotiate with the property; If the property does not agree, you can ask the property to issue all risk responsibility letters. In addition, it should be noted that if it is the top floor, the style of the balcony can be changed without affecting the unity of the facade.

What details should be paid attention to in balcony sealing?

1, after the window frame is filled in, make the waterproof layer. After drying, paste the top coat, but don't block the overflow hole. Because the window frame and the wall are evenly spaced, the gap layer is filled with foam glue to ensure fullness and compactness, and the inside and outside of the window frame must be sealed with silica gel to prevent water seepage. Silica gel should be as transparent as possible and must be treated after drying.

2. The selected profiles must be products that meet the national standards, which are the same as the hardware fittings, without damage or deformation. After installation, doors and windows can be opened or moved without resistance.

3. The size of doors and windows should be smaller than the original balcony, especially at the bottom of the window, leaving a distance of 2 cm and filling it with mineral wool elastic strips or special foaming agents. It can prevent the window frame from cold and hot deformation and prevent rainwater from leaking.

4, the installation of fasteners must use special screws, window frames must be kept vertical and horizontal, and the error should not exceed 0.3 mm. ..