Is the cleaning of work clothes still a problem?

Besides the importance of fabric selection, we also need to know how to wash work clothes. Beijing meridian co., ltd

1, dry cleaning: When some of our work clothes are dirty, what can be done. Check which parts are contaminated before cleaning. Then spray it with water, put a small amount of high-grade soap or washing powder, brush it with a brush, and then rinse the detergent (soap, washing powder and the like) with clear water. Otherwise, white patches will appear on these parts after drying. After washing, dry it to 80% to 90%, spread the work clothes on the flat felt surface, then spread the semi-dry white cloth on the surface of the work clothes to be ironed, and then iron the work clothes in turn.

2. Wet washing: that is, washing suits and work clothes thoroughly with water. Its method is the same as dry cleaning. The cleaning agent can be "silk wool detergent". Never wash it with a washing machine. Don't use towels as padding when ironing work clothes. It is best to use a white cloth that does not fade. Whenever you don't wear work clothes, you should take things out of your pockets in time and sweep the dust off the surface of your suit with a brush in the right direction. If possible, hang it with work clothes hangers and cover it with clean plastic bags. This can not only prevent the deformation of work clothes, but also prevent dust. If you can't hang your work clothes, you can fold them in the usual way, put them in plastic bags, or wrap them in paper and store them together. Do not press, fold, compress or wrinkle hard.

3. Note: When the work clothes are too dirty to be dry-cleaned, they should be soaked in cold water for about 20 minutes before washing. Squeeze water with both hands, and soak in neutral detergent solution (each tablet 1 spoon) or soap tablet solution at about 40℃ for 10 minute. Do not soak in hot water or use strong alkaline soap. Take the clothes out with water, and pay attention to "three levels and one level" when brushing, that is, the washboard should be flat, the clothes should be smooth, the washing should be flat, and the force should be even. The key points of washing are: lapel, front piece, hem, pocket, cuff and shoulder; Pants include: waistband, trouser pocket, front and rear trousers pieces and trousers corners. After brushing, put the clothes back into the washing liquid for several times, then squeeze out the washing liquid, wash it with 25 grams of white vinegar and warm water, and then rinse it with cold water. Straighten and level all the parts, and hang them in a cool and ventilated place to dry the work clothes, so as to avoid baking with naked flame or exposure to strong sunlight.

Article source/2017/ziliaoku _ 0106/6546.html.