The indoor door handle at home is loose. What should I do?

The main reason why the handle of the indoor door is loose in use is that the special driving mode of the lock and the hexagon socket head screw on the handle are not fixed on the square bar or tightened, which will lead to the handle being loose; Therefore, in order to avoid loosening the handle, the lock thread installed when buying should be loose. It is best to tighten it with some hemp rope, or ask the property maintenance personnel for help when changing the lock, or find someone who knows how to decorate. Take off the handle and see if it is a screw problem or a screw mouth problem. If it is a screw problem, go to the hardware accessories store to buy it. If it is a screw hole problem, buy a new set of accessories to install. That's it.

The unique door handle is loose and needs to be unlocked for maintenance. First, turn the two screws in the following figure 1 counterclockwise, then hold the inner and outer handles with both hands, and slowly pull them out while shaking them left and right, so that the handles and the cover plate can be fixed from the circlip. This kind of lock with spring on both handle and panel has the best stability, and there is no gap between handle and panel, that is, the handle will never come loose. There are two ways to fix the screws used to fix the door handle. One method is to fix the lock handle and lock panel together by a screw, and there is a cross cap inside the handle. One is to fix the handle of the lock and the lock panel through the hexagon socket head screw outside the handle.

Push the door tightly inside and outside, and find a suitable [hexagon socket] or+screwdriver to tighten it. If there is no jacking thread on the handle, it is necessary to remove the inner and outer handles, usually two screws. Loosen the handle and take it off. Check which screw is loose and tighten it. For indoor doors and most smart locks, the screw in the center of the handle is loose. Ordinary entrance doors can be fixed by circlips. Take a look. I don't know what you have at home.

Gently pry open a gap between the door handle small cover and the lock core with a screwdriver, and then pull it out by hand, and the lock core and the small cover will be removed. Is it simple? The removed lock cylinder and small cover must be put away! Next, hold the door handle with your hand.